Reverse Squid no longer working on latest development branch

stephenw10

And you do actually see that line in squid.conf?

That site is something you have configured?

Steve

nafeasonto

@stephenw10 yes that line is in squid.conf. been running this for over a year. The latest dev branch seems to have broken something.

stephenw10

So the actual line in the file is?:
http_port Array:80 accel defaultsite=mysite.com vhost

Is it only the reverse proxy failing?

That line looks like it's from a much older Squid version. The only recent thing I'm seeing is this:
https://github.com/pfsense/FreeBSD-ports/pull/776

What snapshot were you running previously when it was working?

Steve

nafeasonto

Yes, mysite.com is obliviously my outside DNS not mysite.com. And i am running the latest package I can get from the available packages. About 3 snaphots ago, i don't remember which on. Omg i forgot to mention I have Pfsense firewall on what it is running on.

stephenw10

'Array' there looks like it might be incorrect. It should be the listening listening interface

Try editing the file to correct that and starting the service. It will be overwritten if you make changes but will prove the issue.

Steve

nafeasonto

What should I change it to?

MikeV7896

I think Steve is saying to remove the Array: part of the line, so it should be just http_port 80 accel...

Stop the service, edit the file, and restart the service. Just remember that making any changes to Squid settings via the GUI will likely reintroduce the Array: bit back into the file, at least until the issue is fixed.

serbus

Hello!

For reference:

http://www.squid-cache.org/Versions/v3/3.5/cfgman/http_port.html

John

nafeasonto

@serbus That worked. Thanks. But why is it doing that? Who can inform the devs to fix that for PFSENSE?

kiokoman

@nafeasonto said in Squid no longer working on latest development branch:

/usr/local/etc/squid/squid.conf

i'm unable to reproduce this, everything seems to work fine on my side
the generation of the squid.conf is ok idk maybe some glich on your pfsense

stephenw10

It looks like it should be producing a line like: http_port ipaddress:80 accel defaultsite=mysite.com vhost

It should be choosing the IP address from an array of the ip addresses on the interfaces by the interface it's listening on.

I would guess that last change that went in to add IPv6 missed something for the reverse proxy case.

I also note 'vhost' is a deprecated option. Reverse Squid could use some love.

Steve

stephenw10

@kiokoman said in Squid no longer working on latest development branch:

i'm unable to reproduce this

In reverse mode?

kiokoman

i put some random stuff inside and it was working, i will try again

stephenw10

May be something else required to 'tickle' it. Like something in the array contents... or a lack of contents etc.

kiokoman

ah ok found it.. yeah it put Array in the config
bug https://redmine.pfsense.org/issues/10367

    foreach (explode(",", $ifaces) as $i => $iface) {
            $real_ifaces[] = squid_get_real_interface_address($iface);
            if ($real_ifaces[$i][0]) {

$real_ifaces[] contain only "Array"

nafeasonto

Good job finding it. I love when people listen to me. Thanks for taking the time to read the post.

viktor_g

Fix:
https://github.com/pfsense/FreeBSD-ports/pull/805

stephenw10

Rapido!

kiokoman

nice work as always viktor

nafeasonto

@kiokoman you updating the package on Pfsense?