WAN not getting IP
-
your PRTSC is show that, you have all interfaces on b8: ca: 3a: ........ this a DELL NIC
-
sorry if you've tried this in the meantime and haven't taken a new screenshot,
Your VLAN setup is good at first glance, what does the dhcp log file show?.....by the way :-)? -
One more idea, sorry I'm not very consistent.....
PPPOE + Dell hardware I go further...
Dell Hardware = Broadcom bce(4) Cards ??? (BCM57XX family)
maybe it is: PPPoE with Multi-Queue NICs - https://docs.netgate.com/pfsense/en/latest/hardware/tuning-and-troubleshooting-network-cards.htmlSorry, if I'm little bit to much to you, but this COVID has locked everyone in theirs home and the home office clients are working well so I have had a lot of free time .....
-
@DaddyGo Don't worry im so thankfull for your time, im just getting the think you asked me, I managed to get to work de MAC spoofing, now im gonna test if the ONT get's the ip into the router.
-
@DaddyGo Okay, we made progress, now my ONT starts blinking on the lan side, it seems that it's trying to do something, also the PPPOE conecction goes up than goes down, give a moment and ill make a screenshot of the DHCP logs.
-
if you have time, read into this, although it is not FTTH, but DOCSIS, but there may be crosstalk between them: https://forum.netgate.com/topic/151929/pfsense-wan-interface-wont-get-ip-address
-
@DaddyGo I have plenty of time hahaha, also I have a dell poweredge r620 with and integrated intel i350-t4 nic, im planning on getting another 4Port also i350 and a dual port sfp+ to get rid of the ONT aswell, this is for future upgrade, first I want to have it working.
-
@DaddyGo Just a stupid question, having the clock wrongly set can impact the way it get's acces to the ISP server, or it just mess up with just the logs and anything else. I know that having a minute behind for example, google authinticator doesn't work anymore, just asking for that reason.
-
of course, NTP is very important, just think of certificates with SSL
but that's another question, hmmm
BTW, specify your time exactly, because the timings are based on that as well
especially since pfSense is a very good NTP server on your network and you don't need to use external pools -
we use old, but little used Dell R210IIs for pfSense with NICs I350-F4 / I350-T4 (because the on -board BCM chipset is not very suitable for IPS) / it’s a fantastic configuration, it survives everything
-
@DaddyGo Okay, im gonna set the time right, also I need to take a break for this, my roommate started playing a videogame and I can't mess with the network right now till 23 so ill be back on doing testing at that hour, thanks so much honestly you made more progress for me than the 4 days im stuck with this. I'll reply with more thinks later as I can mess with the network again.
-
thank you for your kind comment, let’s spend time with what we love
if I can even help, I'll be here tomorrow and now I'll check out the How the Universe Works (next episode) -
@DaddyGo Back at work hahaha, I changed the time, this is the DHCP log is showing up, ill link the pictures throught drive because it's faster than taking a screenshot and uploading since only my laptop has an internet connection (https://drive.google.com/open?id=1-1ooMoEYBpKMLVECANBQ9Hvi2wyp3y8d) that's what DHCP is showing.
-
Two things :-)
so that we can get into the "picture" more seriously, so your system looks like this: ISP modem or router (in bridge mode) + pfSense box ???the another:
- the following should be observed in the dhcp log.... from WAN
but in front of it press a button on the status / interface tab, WAN section "release WAN" / with this button we start a process which, if we are lucky, generates a log entry in dhcp
- the following should be observed in the dhcp log.... from WAN
-
@DaddyGo my actual system is like this ONT->pfSense box, the ONT is a Nokia G-010G-PPL, in it's config it doesn't have any toggle for bridge mode so it's bare as it is on it's own, ill get that button pressed in a moment and ill share the result.
-
@DaddyGo Sorry to bother you but I can't find that "release wan" button this is what I have (https://drive.google.com/open?id=1-MPYaGvSxfTnW02o-kkVxdYjGNeEGXE2) also everytime I try to connect "WAN_FI" it automatically disconnects, so that's the "problem"
-
This is similar to what we use in Portugal: Altice Network = (Nokia)
I know this ONT well, but it's always paired with an ISP router like Technicolor brand.
It doesn’t work on its own (ONT), in general.
So that's eth. port (on ONT) does not directly access the GPON network.
This way you can't switch directly to pfSense box. (by replacing your original ISP's router)Requires: original ISP ONT (Nokia Altice) + original ISP router configured in bridge mode + pfSense box
Are you trying to connect the pfSense box directly to your ISP ONT?
Do I think the situation is right?
Or am I on the wrong way? -
@DaddyGo Yes, you nailed, im trying to connect the pfSense box directly to the ONT, the router provided doesn't have either a bridge mode or something similar to it, so it's kind imposible to configure it that way. Would this be posible if I buy an SFP+ GPON ONT trasciever and put the data of the nokia ont into the transciever?
-
We solved the problem :-)
You cannot get a dynamic IP for pfSense directly from the ONT!The providers (ISPs) usually give the option to bridge mode, pls. call your ISP.....
and if possible in the ISP’s policy (business) then they centrally set your bridge mode, with that set the original ISP router to one of eth. port to bridge portDon't experiment with your own GPON SFP and similar solutions, it WILL NOT WORK! (money toss)
The Altice Network has the same structure everywhere and I know it well -
@DaddyGo I already called them in the first place and told me that I can't used another router besides their, sad to know this, maybe I should change my ISP, the sad part is that here in spain tbh is the cheapest 600/600 that youll find, now I know why is so cheap. Well at least now I know that It won't wonrk no matter what I try, maybe I'll try to swithc for the original ISP that this OMV is working on that is Vodafone, thanks so much for your time, honestly. Also maybe I delete the pictures on this post as I noticed that I didn't blur any mac adress hahaha, in the near no so far future, could I just message you again for help? You helped me so much and know so well how this thing works.
