pfSense 2.4.5 Now Available
-
Update took quite a bit of time on my SG-1100 and I had to reboot my cable modem afterwards. The web interface leads one to believe that the system should reboot in 80 seconds or so. This is not even close. The upgrade took >10 minutes. I ended up using the usb console to see that the system wasn't frozen. I suppose this is a live & learn situation but it would be really nice if the web interface had a link to the readme and a reasonable time estimate based on the hardware. The quick flashing green light (black diamond) isn't all that useful after a while.
-
Thought I'd toss out a couple more data points for upgrade times -- the Supermicro Xeon D based box took about 3 minutes to fully upgrade (i.e. time needed to come back to the login screen). The custom built i3-8100 was about the same - I started the upgrade, walked away for a couple minutes and it was already finished by the time I returned.
-
@Gertjan said in pfSense 2.4.5 Now Available:
@chudak said in pfSense 2.4.5 Now Available:
Look at how many people having troubles ?!
No way.
Count the people that still have problems copying an iPhone to a new iPhone. That will always last. Although it's a finger in the nose trick these days.The pfSense upgrade procedure has been guided, documented and explained - with every major version update, for several years now.
Issues are not possible, because pfSense is a close-to-industrial firewall. They do not oblige you to write out that big cheque like Cisco to have it dealt with, or send one of the employees to a new training to handle the update. pfSense makes it easy : they only ask one thing : being able to read. There is no place to mess up : no one will install a new version on a system will taking down the companies or their private Internet access. For a couple of $$ you have a backup system (an old PC will do) - so the upgrade is two phase. Permits you to fast compare, check. There is a free support forum and redit and the manual and the main Negate blog, a huge channel filled up with in-depth vidoes as a guide line : what do you want more ? You really need more ? Serious ?@chudak said in pfSense 2.4.5 Now Available:
I was trying to be very carefu
As said : RTFM.
@chudak said in pfSense 2.4.5 Now Available:
did not see that system has a new
and there problems started !Like that red traffic light in front of you on an intersection ? You'll be asking for barriers on the road also now ?
More code, more text and more screen will make system less error prone. In theory, yes. But as long as systems deal with humans, there will always be issues.
Open-source software is awesome and I don't submit to the notion that because it's free it has to be of lower quality then commercial software.
Yes RTFM is great concept !
But , are you arguing against throwing a big red banner on top of the UI right after major upgrade to warn users about proper steps and point to release notes, so we have less mistakes ? (similar like we see sometimes for user surveys)
Of cause, there are will be other human errors, but this one will be prevented.
Stay well and healthy and thank you for you support!
-
I did a fresh install of pfSense 2.4.5. But after installing and setting up of pfBlockerNG, massive problems occurred described here.
-
@Bob-Dig said in pfSense 2.4.5 Now Available:
I did a fresh install of pfSense 2.4.5. But after installing and setting up of pfBlockerNG, massive problems occurred described here.
Same but worse here. No boot loader available on a fresh install.
Upgraded from 2.4.4p3 and it worked like a charm until package install.
Running on a 32core XEON setup.
-
@dennis_s
Will there be a 2.4.5-p1 relase that fixes the current problems with update of 2.4.4-p3 to 2.4.5?
Unfortunately I do not see anything on redmine. -
@ramup Our engineers are aware of a few customers that have had problems and are in the process of trying to replicate those issues so that a fix can be applied. As of now, there isn't an ETA on a p1 release.
-
I had some issues with 2.4.4-p3 (random packet drops) now with 2.4.5 luckily all fine again - thanks to all who contributed.
-
I tried upgrade with my pfsense server at home from 2.4.4_p3, but in this case I did a snapshot on vmware, and the problem is same. The ping time is very high and the navigation have a lot of problems.
I restored the snapshot, and all return to normally
-
Might as well capture my results here upgrading pfSense from 2.4.4p3 to 2.4.5...
SG-5100 - Primary Firewall - No issues with upgrade.
SG-2440 - Backup Firewall - On first boot after upgrade, no LAN or serial console access. Subsequent reboots no change. Ended up doing a memstick image install and then restoring configs from Primary. All good now.
Both systems use same trivial configuration and the packages are the same (apcupsd, arpwatch, sudo) except SG-2440 also has coreboot.
Peter
