Crash when switching interface OFF and ON again

louis2

I did some more testing using latest snapshot.

My actual conclusion is that the problem is, as original assumed, related to the known PIMD-issue(s).

Note that apart from crashes I also notice boot loops related to etc/inc/config,lib.inc on line 383 related to using a scalar as array (already reported earlier)

So I will remover PIMD for now, hoping that that will "solve" the issue.

Louis

w0w

I think it can be all related to same RADIX_MPATH since this feature was enabled in pfSense.
https://redmine.pfsense.org/issues/9544
It seems that this feature was implemented in 2011 on freebsd 8, but it does not look to be stable even in 2020, there are some tickets on freebsd opened years ago, maybe Netgate guys can push some fixes, don't know.
@jimp said in pf_test: kif == NULL, if_xname on multi-WAN and "Reset all states if WAN IP Address changes":

It's possible. There are other problems with RADIX_MPATH as well but I'm not sure if we're going to look into fixing them or back that out.

louis2

Yep,

Could be. My feeling is that there might be more problems below the surface as well ... IGMP-proxy and now PIMD have never been working in a decent way for years(!) now.

But I hope that will change soon. The really good news is that Viktor did a patch today!
As soon as it is in the snapshot, I will test it.

But speaking in general terms, the problem I have with Netgate is that at the moment I discover an issue and notify something is not working, probably including some findings
like:

a) not ok
b) not ok
c) not ok

Please have a look!
They shoot me down

Netgate want an exact bug report related to a) etc.

And after fixing that it is not unlikely that it is still not working because of "b) and c)" and perhaps even other thinks.

So what I would prefer is that they take this as an package, fix it all, including the communication with the FreeBSD developers, if necessary. Not saying that that does not happen, but it is not the default attitude.

Louis

w0w

There are a lot of other problems, priorities and clients they are focused on, so be patient :)
Anyway, if those crashes are related to radix_mpath than there are solutions already, if no other way found — they will recompile the kernel without this option enabled. If Netgate really want to use it in some installations they can do some custom kernel, snapshot or some GUI selection that will boot RADIX_MPATH enabled kernel. At least three solutions I can take out of my head and they definitely can add own solution.

louis2

Viktor,

A question and a remark.

Starting with the question, I noticed that your patch is related to the pimd-package and not to some generic startup file, what I (without related knowledge) had expected. So it will be a package update (to 0.3) and not a system update. Could you briefly describe what that implies in terms of process steps?

A remark related to a finding today. I installed pimd on a system which was not started with pimd. So the startup problems you solved, where not there .... I suppose ..... Never the less ...... it was (unexpected) not working correctly .... (vif issue still there)

I did some forced tests (after the feebsd fix) two weeks ago, using a procedure like this:

pimd -q (stop)
stopping one of my interfaces
starting the the interface again (which does force some os-internal reset, I think ..... but what often also lead to a crash)
pimd -c /var/etc/pimd/pimd.conf -d -f -N (start)
pimd -r (show routes)

By then that (forced test) worked!

So I am really curious and hoping that the patch fixes "all issues".
If not at least it fix some of them

Louis

louis2

I just successful repeated my 23/6 experiment:

pimd not working correct only seeing 3 out of many vlans
testing more or less as described above disabling two (of the recognised) interfaces, switching them on one by one) and see ......
pimd does recognizing all of them .....
no crash ......

I did the test again because, by then I did assume that the problem was correlated with the probably repaired boot problem, where my today tests where pimd was installed after the boot, raise again the verdict that there is another fix to go.

To be sure, we / I have to test the actual patch first

Louis

JeGr

I see a similar/related problem. For the last few 2.5 snapshots (around 2-3 weeks) every time I modify my WAN interface (especially in IPv6 settings), the whole box crashes and reboots. Immediatly.

Last crash happend a few seconds ago after updating to the latest snapshot and trying to modify WAN with disabling a DHCP6 option (don't release prefix option). It panic'ed, crashed and rebooted.

crashdump.zip

Box showed no problems running 2.4.x stable. HW is a network appliance (Lanner FW7525) with Atom C2558 so nothing out of the ordinary, exotic or unsupported.

\jens

jimp

The first panic on this thread appears to be related to PIMD traffic:

Fatal trap 12: page fault while in kernel mode
cpuid = 3; apic id = 03
fault virtual address	= 0x3000
fault code		= supervisor write data, page not present
instruction pointer	= 0x20:0xffffffff80e934f5
stack pointer	        = 0x28:0xfffffe00004de7f0
frame pointer	        = 0x28:0xfffffe00004de7f0
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 12 (swi1: netisr 2)
trap number		= 12
panic: page fault
cpuid = 3
time = 1593767353
KDB: enter: panic

db:0:kdb.enter.default>  bt
Tracing pid 12 tid 100040 td 0xfffff800043a7000
kdb_enter() at kdb_enter+0x37/frame 0xfffffe00004de4b0
vpanic() at vpanic+0x197/frame 0xfffffe00004de500
panic() at panic+0x43/frame 0xfffffe00004de560
trap_fatal() at trap_fatal+0x391/frame 0xfffffe00004de5c0
trap_pfault() at trap_pfault+0x4f/frame 0xfffffe00004de610
trap() at trap+0x286/frame 0xfffffe00004de720
calltrap() at calltrap+0x8/frame 0xfffffe00004de720
--- trap 0xc, rip = 0xffffffff80e934f5, rsp = 0xfffffe00004de7f0, rbp = 0xfffffe00004de7f0 ---
if_inc_counter() at if_inc_counter+0x15/frame 0xfffffe00004de7f0
if_simloop() at if_simloop+0xd1/frame 0xfffffe00004de830
pim_input() at pim_input+0x409/frame 0xfffffe00004de890
encap_input() at encap_input+0xd1/frame 0xfffffe00004de900
encap4_input() at encap4_input+0x28/frame 0xfffffe00004de930
ip_input() at ip_input+0x168/frame 0xfffffe00004de9e0
swi_net() at swi_net+0x12b/frame 0xfffffe00004dea50
ithread_loop() at ithread_loop+0x23c/frame 0xfffffe00004deab0
fork_exit() at fork_exit+0x7e/frame 0xfffffe00004deaf0
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe00004deaf0
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---

The second appears to be a crash when attempting to send an IPv6 packet

Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address	= 0x0
fault code		= supervisor read data, page not present
instruction pointer	= 0x20:0xffffffff8102e56a
stack pointer	        = 0x28:0xfffffe004ba27550
frame pointer	        = 0x28:0xfffffe004ba277b0
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags	= interrupt enabled, resume, IOPL = 0
current process		= 6861 (dpinger)
trap number		= 12
panic: page fault
cpuid = 2
time = 1594204579
KDB: enter: panic

db:0:kdb.enter.default>  bt
Tracing pid 6861 tid 100357 td 0xfffff8011dd1f000
kdb_enter() at kdb_enter+0x37/frame 0xfffffe004ba27210
vpanic() at vpanic+0x197/frame 0xfffffe004ba27260
panic() at panic+0x43/frame 0xfffffe004ba272c0
trap_fatal() at trap_fatal+0x391/frame 0xfffffe004ba27320
trap_pfault() at trap_pfault+0x4f/frame 0xfffffe004ba27370
trap() at trap+0x286/frame 0xfffffe004ba27480
calltrap() at calltrap+0x8/frame 0xfffffe004ba27480
--- trap 0xc, rip = 0xffffffff8102e56a, rsp = 0xfffffe004ba27550, rbp = 0xfffffe004ba277b0 ---
ip6_output() at ip6_output+0xd3a/frame 0xfffffe004ba277b0
rip6_output() at rip6_output+0x507/frame 0xfffffe004ba27980
rip6_send() at rip6_send+0x10d/frame 0xfffffe004ba279e0
sosend_generic() at sosend_generic+0x4ca/frame 0xfffffe004ba27a90
sosend() at sosend+0x50/frame 0xfffffe004ba27ac0
kern_sendit() at kern_sendit+0x19d/frame 0xfffffe004ba27b60
sendit() at sendit+0x19c/frame 0xfffffe004ba27bb0
sys_sendto() at sys_sendto+0x4d/frame 0xfffffe004ba27c00
amd64_syscall() at amd64_syscall+0x387/frame 0xfffffe004ba27d30
fast_syscall_common() at fast_syscall_common+0x101/frame 0xfffffe004ba27d30
--- syscall (133, FreeBSD ELF64, sys_sendto), rip = 0x8003cde0a, rsp = 0x7fffdfdfcf48, rbp = 0x7fffdfdfcf90 ---

I suppose it's possible they are both related to routing in some way but there isn't any solid evidence pointing to that specifically.

JeGr

@jimp said in Crash when switching interface OFF and ON again:

The second appears to be a crash when attempting to send an IPv6 packet

That would've been mine. And yes that always/very often happens when I edit any IP6 related settings on WAN or other VLANs. Started only when upgrading to 2.5dev to test those upnp changes and help testing though, with 2.4.5 had no such problems.

JeGr

@jimp also had 3-4 crashes in a week again. More than the whole last year with 2.4.x stable. Something is definitely off or making trouble driver-vise. And it's always something interface (maybe v6) related as it is every time my ISP does some "work" (meh) and the internet's gone.

louis2

@JeGR , @jimp,

In the past month my system was crashing like hel as soon if was even looking at the switch interface "off and on" button. Since a couple of days that seems a bit better, but it is not OK yet.

I still can easily provoke a crash, but it is more in specific situations now, where switching an interface was almost a certain crash in the past 2 month.

Note that:

I have native IPV6 so that can be related!
there are also multicast related issues, which are causing interface crashes

I desperately tried to get PIMD to work, simply impossible on my system/configuration, but that also has to do with interfaces and vifs:

switching off and on the corresponding vip ==> crash
interfaces not being process correctly: "Jul 22 19:19:51 pfSense pimd[35276]: /var/etc/pimd/pimd.conf:7 - Invalid phyint address 'ix1.116'

These issues are probably not caused by the pfSense software itself, but it definitively affect it. There are probably things in the FreeBSD-kernel not 100% OK,

I did generate a FreeBSD-bug report (248103). I can see the wrong behavoir, however

I do not have testing facilities, debug kernels etc, to tell what is technically exactly wrong (which module, which function call).

So, where I am hoping for! is that Netgate having far better testing facilities and the skilled engineers, are willing to point more exact to the “deeper down problem cause", so that the FreeBSD engineers can fix it!

Quite sure that there is at least one sevire bug related to interface processing down there in the kernel (interrupt handling, iflib, multicast routing or so).

Below a small part of a crash report I often see.

Louis
PS note that I amj using an amd64 system and the interfaces I am swithing off and on are all intel igb or ix based, and all using the iflib driver type.

Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 01
fault virtual address = 0x1000
fault code = supervisor write data, page not present
instruction pointer = 0x20:0xffffffff80e934f5
stack pointer = 0x28:0xfffffe00004de7f0
frame pointer = 0x28:0xfffffe00004de7f0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 12 (swi1: netisr 2)
trap number = 12
panic: page fault
cpuid = 1
time = 1594920087
KDB: enter: panic

louis2

This post is deleted!

w0w

I don't think it's related to IPv6, but to RADIX_MPATH option.
https://forum.netgate.com/topic/150986/pf_test-kif-null-if_xname-on-multi-wan-and-reset-all-states-if-wan-ip-address-changes/33
I've tested different variations and also disabled IPv6, nothing.
My current crashes are:

Filename: /var/crash/info.0
Dump header from device: /dev/ada1p3
  Architecture: amd64
  Architecture Version: 4
  Dump Length: 74752
  Blocksize: 512
  Compression: none
  Dumptime: Fri Jul 10 22:17:47 2020
  Hostname: -
  Magic: FreeBSD Text Dump
  Version String: FreeBSD 12.1-STABLE df4360fdf61(devel-12) pfSense
  Panic String: sleeping thread
  Dump Parity: 4138356775
  Bounds: 0
  Dump Status: good

Filename: /var/crash/info.1
Dump header from device: /dev/ada1p3
  Architecture: amd64
  Architecture Version: 4
  Dump Length: 157696
  Blocksize: 512
  Compression: none
  Dumptime: Fri Jul 10 22:28:12 2020
  Hostname: -
  Magic: FreeBSD Text Dump
  Version String: FreeBSD 12.1-STABLE df4360fdf61(devel-12) pfSense
  Panic String: page fault
  Dump Parity: 30683997
  Bounds: 1
  Dump Status: good

Filename: /var/crash/info.2
Dump header from device: /dev/ada1p3
  Architecture: amd64
  Architecture Version: 4
  Dump Length: 157696
  Blocksize: 512
  Compression: none
  Dumptime: Tue Jul 21 13:41:55 2020
  Hostname: -
  Magic: FreeBSD Text Dump
  Version String: FreeBSD 12.1-STABLE fcbc0f88231(devel-12) pfSense
  Panic String: general protection fault
  Dump Parity: 1753744959
  Bounds: 2
  Dump Status: good

Filename: /var/crash/info.3
Dump header from device: /dev/ada1p3
  Architecture: amd64
  Architecture Version: 4
  Dump Length: 157696
  Blocksize: 512
  Compression: none
  Dumptime: Tue Jul 21 13:58:07 2020
  Hostname: -
  Magic: FreeBSD Text Dump
  Version String: FreeBSD 12.1-STABLE cf48cd75cf5(devel-12) pfSense
  Panic String: page fault
  Dump Parity: 680143114
  Bounds: 3
  Dump Status: good

Filename: /var/crash/info.4
Dump header from device: /dev/ada1p3
  Architecture: amd64
  Architecture Version: 4
  Dump Length: 75776
  Blocksize: 512
  Compression: none
  Dumptime: Wed Jul 22 12:01:14 2020
  Hostname: -
  Magic: FreeBSD Text Dump
  Version String: FreeBSD 12.1-STABLE cf48cd75cf5(devel-12) pfSense
  Panic String: general protection fault
  Dump Parity: 387144248
  Bounds: 4
  Dump Status: good

I have ix card also. Played with drivers some time ago. Nothing. Since I've backup firewall I've moved backup to 2.5 and primary to 2.4. The fatal errors are still coming only on 2.5 version even on absolutely different hardware.

JeGr

Then it may be another problem for you @w0w as my appliance uses igb NICs and it's crash-dumping immediatly if something is triggering the NIC like an "internet down" or "interface down" on the WAN. The last few weeks if my ISP has problems and reboots my front router (AVM box) I can wait for the "beep" of my pfSense box shortly after as it crashdumps and reboots.

w0w

@JeGr
No, my backup firewall uses igb and moreover, I have tested em card, same crashes. I do not think it is hardware related, I am pretty sure it is not.

louis2

@w0w said in Crash when switching interface OFF and ON again:

@JeGr
No, my backup firewall uses igb and moreover, I have tested em card, same crashes. I do not think it is hardware related, I am pretty sure it is not.

We simply do not know what is causing the crashes. Can be one bug very deep down or multiple bugs.

However be aware that FreeBSD is in FreeBSD12 redesigning its driver structure.

Where each interface type used to have its own driver, they are transforming that in the direction of "a mini driver per device type" and doing the upperlayer driver things in a new library called "iflib"

I know that on my intel64 system all three IO-ports em, igb and ix are using this principle / the "iflib".

Louis

w0w

@louis2 Yep. But those or similar crashes you have now, I have had when 2.5 was based on 12.0-RELEASE using standard driver. The situation was exactly the same, any movements like up/down, unplugging-replugging interface caused the crash, not always and sometimes it was immediately, sometimes not. After some trial and error, googling, digging and so on I think now that it is radix_mpath option and maybe this feature is not buggy by itself but it shows some system errors that never otherwise appear. The only way I see to test it is to compile the kernel without radix_mpath option enabled.

louis2

@w0w said in Crash when switching interface OFF and ON again:

radix_mpath

radix_mpath is related to multipath rooting. I did not dig into that, but it sounds like route redundancy, something I am not using (what not necessary implies that I am not affected).

I also noticed that there is already a pfSense feature request, noting that there are known issues inside radix_mpath (Feature #9544).
However my personal feeling is that in my case it is more likely to expect the problem in some multicast module or in some generic interface handler.

If …. I just had an "in circuit emulator" here attached to my system / your system and all sources, we would know within hours, ..... since most issues are reproduceable ....... but of course we do not have that kind of very advanced tooling.

If some one would compile a pfSence version having a lot of extra debug statements .... that would probably help as well ....

Louis

w0w

May be @rschell can help, at least with pfSense version compiled without radix_mpath.
Unfortunately, my knowledge is not enough to build the kernel myself.

louis2

@w0w, @rschell

I did open bug at FreeBSD Bugzilla – Bug 248243
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=248243

It would help if you support me there by entering info about the issues you noticed (and perhaps your verdict). Of cause supported by facts as far as possible.

Louis