Packet loss and errors on VLAN Interfaces when using vmware
-
Community –
I have this issue with interface errors using pfsense to create a VLAN tag vs creating the VLAN Interface in vmware then assigning the Interface to pfsense.
Scenario A:
Create a VLAN tag in pfsense and assign it an interface and you will see after a while there's lots of out errors and I get packet loss about 4% on the interface and this causes issues on our network from time-to-time
Scenario B:
Create the VLAN on the vswitch in vmware then assign the new vswitch network adapter to pfsense, there's 0% packet loss and no out errors.
I have to create more than 35 VLANS and vmware only supports 10 vswitch network interfaces per VM, I didn't want to create 4 pfsense VM to handle our network.
I'm using VMXNET3 drivers and running 9000 MTU because we have 10Gbe network with the open-vm-tools package installed
How can I get more details to trouble shoot this and is there any documented issues or solution/patch I can do to resolve this?
-
I'm out of my depth here, but you'll probably need to get a command line and figure out what the exact interface errors are.
Just out of curiosity, have you tried the e1000 emulated adapter? I know the performance won't be as good, but if it shows errors as well, that tells us something. Not sure what, but maybe it will help.
-
Hi Gomez,
I didn't try the e1000. I will give it a try and report back.