Squidguard update fails after upgrading pfSense 2.4.5-RELEASE-p1
-
Thanks for this. This was the only issue I had upgrading my MBT-4220.
-
I also have the same behaviour but with the two following package :
pfSense-pkg-ntopng (rcfa seems to have the same issue.)
pfSense-pkg-haproxyWhen I try to reinstall or upgrade one of these package it it stays stuck indefinitely after showing "Writing configuration... done." :
Reinstalling pfSense-pkg-haproxy >>> Upgrading pfSense-pkg-haproxy... Updating pfSense-core repository catalogue... pfSense-core repository is up to date. Updating pfSense repository catalogue... pfSense repository is up to date. All repositories are up to date. Checking integrity... done (0 conflicting) The following 1 package(s) will be affected (of 0 checked): Installed packages to be REINSTALLED: pfSense-pkg-haproxy-0.60_4 [pfSense] Number of packages to be reinstalled: 1 [1/1] Reinstalling pfSense-pkg-haproxy-0.60_4... [1/1] Extracting pfSense-pkg-haproxy-0.60_4: .......... done Removing haproxy components... Menu items... done. Services... done. Loading package instructions... Deinstall commands... done. Syslog entries... done. Saving updated package information... overwrite! Loading package configuration... done. Configuring package components... Loading package instructions... Custom commands... Executing custom_php_install_command()...done. Menu items... done. Services... done. Writing configuration... done.I've upgraded my current installation from 2.4.4-p3 to 2.4.5-p1 and I have the issue.
I've upgraded a fresh install 2.4.5 to 2.4.5-p1 and restored a backup of my configuration after the upgrade and I have the same issue.
So it seems to me that there's a bug preventing the upgrade to finish on multiple packages on the version 2.4.5-p1.
-
Hello everyone;
Same issue here. But the problem are with the suricata and e2guardian packages. I'm following this to try to solve this issue.
-
Same issue here. Packagemanager has troubles on 2.4.5-p1.
I've upgraded my pfsense boxes to 2.4.5p1 and now i can not remove or add packages.
If i restore my config on an fresh installed 2.4.5p1 - pfsense reboots and hung on
"Packages are currently being reinstalled in the background."
"Do not make changes in the GUI until this is complete." -
After edit manually the config.xml file, and add the suricata entries, this fixed the problem. E2guardian, however, still remains with problems, because isn't possible to install the package. I've made a clean and fresh install of pfsense, and restored the backup, but, with no success.
-
Thanks!!!!! This worked for for each of the 11 Netgate devices I manage.
-
Thanks @tmsongster, solved the issue!
-
I had the same issues. The cause seems to be the update process is waiting for input that is not expected.
If i update via the command line and the updates hangs, i just press enter. The it continues.
-
@tmsongster Thanks This worked for me.
-
Will this be fixed in the next update?
-
@tmsongster UPDATE 20200828: Similar issue today - squidGuard update stalled, would not complete.
- Attempted squidGuard update from Package Manager, would not complete
- Broke the law and went back to Package Manager > Installed Packages which showed squidGuard update failed
- Then to Services / Package / Proxy Server: General Settings / General
- Unchecked "Check to enable the Squid proxy."
- Went back and updated squidGuard in Package Manager (success!)
- Re-enabled Squid proxy (Checked "Check to enable the Squid proxy.")
- At this point for me, the squidGuard service was stopped. Restarting from Dashboard failed
- Restarted squidGuard:
- Services / Package / Proxy filter SquidGuard: General settings / General settings
- Checked "Enable: Check this option to enable squidGuard. (Read the text about "target categories")
- "Apply"
- "Save" (at bottom)
Peace and harmony. Similar steps as 16 Jun 2020, but had to jumpstart squidGuard at the end.
-
@tmsongster SALAM, Thank you ,the problem solved.
-
I had the same problem. Turned off ClamAV in Squid and problem solved.
