Windows RADIUS Server

mohkhalifa

@NogBadTheBad said in Windows RADIUS Server:

Try asking in a Windows forum maybe?

I'm asking if someone here did it before !

NogBadTheBad

@mohkhalifa said in Windows RADIUS Server:

I'm asking if someone here did it before !

You may have more luck in a Windows forum with it being a Windows product.

You had no reply for at least 17 hours, just saying.

mohkhalifa

FINALLY I did it
pfSense integration with Microsoft RADIUS Server and with internet bandwidth limit from Active directory users and groups.

free4

@mohkhalifa wow

Amazing

Actually i would be quite interested to know how you've done that

mohkhalifa

@free4 said in Windows RADIUS Server:

@mohkhalifa wow

Amaizing

Actually i would be quite interested to know how you've done that

soon I will make a tutorial explaining the story from A to Z because it's really much better compared with freeRADIUS

yanqian

Hi,
I also tried use Microsoft NPS as radius server, but it didn't work, here is the detail:

Client side, user got the error message "could not connect to authentication server." after they input username and password.
NPS server side, I can see "Audit Success" log from windows event logs, i.e. NPS granted access to the user, authentication request was accepted.

I don't know why it showed error in client side.

btw, one authentication request will trigger 2 logs in NPS logs, but when I tried to authenticate in the portal page, NPS server will got 3x2 repeated logs, it seems that pfsense tried to authenticate 3 times (all successful).

yanqian

@mohkhalifa May I know which version of pfsense do you use?

I tried following two version pfsense, neither of them works. I tried both MS-CHAPv1 and MS-CHAPv2, It seems that pfsense doesn't handle the radius response from NPS well.

2.3.4-RELEASE-p1
error sending request: No valid RADIUS responses received.
2.4.5-RELEASE-p1
error: could not connet to authentication server.

but when I checked the NPS (network policy server), I can see the success log when I tested both versions, I got twice success logs when I test 2.3.4 p1, got 3 times success logs when I test 2.4.5 p1.

mohkhalifa

Dear @yanqian,
I'm using the latest version of pfSense 2.4.5-RELEASE-p1
also I sent you a private message

Xavi_IT

I've got PfSense with version 2.4.5-RELEASE-p1. In the same LAN subnet I have my Windows Server 2016 with a Radius server working under Network Policy Server. I have followed the tutorial at https://docs.netgate.com/pfsense/en/latest/vpn/openvpn/authenticating-openvpn-users-with-radius-via-active-directory.html

I'm having the same problem as @yanqian.

For any authentication attempt in "PfSense > Diagnostics > Authentication" I get the error message "Authentication failed".
In "PfSense > Status > System logs" for each attempt appears a new line with the message "/diag_authentication.php: Error during RADIUS authentication : No valid RADIUS responses received".
In the NPS event log, for each authentication attempt appear at least 4 log entries with event ID 6272 which indicate a successful attempt.

Both servers can see each other via network.

Xavi_IT

After writing the last message, I have successfully configured LDAP authentication server in the same PfSense device that points to the same Windows Server. This way everything works, including OpenVPN clients validation using allowed domain user accounts.

mohkhalifa

@Xavi_IT said in Windows RADIUS Server:

After writing the last message, I have successfully configured LDAP authentication server in the same PfSense device that points to the same Windows Server. This way everything works, including OpenVPN clients validation using allowed domain user accounts.

Sounds good. Also, you can add custom attributes to control per user bandwidth. it's really amazing integration. ENJOY :)

yanqian

@mohkhalifa
Could you please share the configuration tips with me?
I did get your private message, but I am not able to let you do the configuration remotely.
Thanks any way.

@Xavi_IT
May I know how did you solve this issue ?
Thank you!

Xavi_IT

Hello @yanqian,
I could not configure a Radius server in PfSense "Authentication Servers". I followed several tutorials and Windows NPS event log was returning succesfull authentication attempts, but I could not figure out why didn't PfSense was not getting them.

Finally I had success using LDAP instead of Radius in PfSense "Authentication server" to connect to Windows Active Directory. With LDAP It worked at first attempt.

anwarmoinudeen

@yanqian did ur issue got resolved .. i to have the same issue in pfsense

aspiringnetworkadmin

@anwarmoinudeen Hi Sir did your issue got resolved already? i also have the same issue in pfsense

yanqian

@anwarmoinudeen As I recall, I hadn't solved this issue, and I gave up NPS radius server test. I hope @mohkhalifa would provide the guide in detail.

jimmychoosshoes

Old topic but try this:

First you need to know the vendor code for PFSENSE which I found in https://github.com/pfsense/pfsense/blob/master/src/usr/share/doc/radius/dictionary.pfsense

VENDOR		pfSense				13644

BEGIN-VENDOR	pfSense

ATTRIBUTE	pfSense-Bandwidth-Max-Up		1	integer
ATTRIBUTE	pfSense-Bandwidth-Max-Down		2	integer
ATTRIBUTE	pfSense-Max-Total-Octets		3	integer

END-VENDOR pfSense

Now you can go to your network policy in NPS for the captive portal. Go to:
SETTINGS, VENDOR SPECIFIC, ADD, "custom", "Vendor specific/Radius standard", ADD,ADD:

Enter Vendor Code = 13644
Yes it conforms
configure Attribute -> 1 for pfSense-Bandwidth-Max-Up with decimal and you bandwidth

repeat for 2 = pfSense-Bandwidth-Max-Down

Untested but this should work in theory.

dochy

@jimmychoosshoes after that how can we limit bandwidth by users can you help me?

yanqian

@anwarmoinudeen I know this is old, just want to update here, I tried to use NPS on server 2016 as RADIUS server today, and it works without any issue.
Pfsense version is 2.7.0, RADIUS MS-CHAPv2 .

dochy

@yanqian with FreeRadius?