Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Open VPN problem

    Scheduled Pinned Locked Moved OpenVPN
    3 Posts 2 Posters 414 Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • R
      Robert2020
      last edited by Robert2020

      There's two servers connected to the same VPN which is hosted in an OFF-SITE pfsense

      This is the problem:

      Server1.domain.local:
      If I ping server2 the packets go through the local router and I get the proper response from the server2 lan address.

      Server2.domain.local:
      If I ping Server1 the packet goes through the VPN and since the VPN server is offsite the packet never reaches the LAN address.

      I alrady checked the off-site pfsense openvpn server and it's "IPv4 Local network(s)" is empty so it shouldn't be doing this. This setting was incorrectly configured to the LAN network but it was later removed, which fixed the problem on the other server but not on server2.

      Config on the problematic server:
      dev tun
      persist-tun
      persist-key
      cipher AES-128-CBC
      ncp-ciphers AES-128-GCM
      auth SHA256
      tls-client
      client
      resolv-retry infinite
      remote <EXTERNALIP> 1194 udp4
      verify-x509-name "<CERTNAME>" name
      auth-user-pass password.txt
      pkcs12 pfSense-UDP4-1194-etfs2.p12
      tls-auth pfSense-UDP4-1194-etfs2-tls.key 1
      remote-cert-tls server

      how can I fix this?

      V 1 Reply Last reply Reply Quote 0
      • V
        viragomann @Robert2020
        last edited by

        @Robert2020
        Presumeably server2 has its default route poining to the VPN gateway.

        So check its routing table when the VPN is up and again when the VPN is down and also check the VPN logs to see if the routes are added by OpenVPN.

        1 Reply Last reply Reply Quote 0
        • R
          Robert2020
          last edited by

          You were right, an entry on the routing table was off, for some reason, after deleting the ovpn client, user and custom client configs and re-doing them all, it worked fine. Thanks.

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.