Pfblockerng using feeds

[freefall]

@RonpfS so how do I remove it or shut it off seen it link goes to a blank file on there site and hasn't block anything?

[RonpfS]

That shows that no DNSBL group has been enabled. Maybe you already deleted it .

[freefall]

@RonpfS nope it say it to be active...

[RonpfS]

Ok let's forget about the DNSBL thing. Your first pics wasn't detailed enough.

If you want to remove an URL for PRI3, go to Firewall / pfBlockerNG/ IP / IPv4, open the PRI3, turn the State to OFF, Save IPV4 Settings, go to Update tab and do a Force Reload IP.

If you want to disable the PRI3 group, change the Action to Disabled, Save IPV4 Settings, go to Update tab and do a Force Reload IP.

[freefall]

@RonpfS

I would if I could. An I'd make the picture more detail if I could but there a 200k picture limit..

[RonpfS]

Detailled as in your first picture didn't show the PRI3 header ....
What version of pfblocker and pfsense version are you using.

Did you ran any Update or Cron update since ?

As it is a new pfblockerNG installation, why don't you start over.
Disable pfblockerNG, disable Keep settings. Remove the package and install it again.

[freefall]

@RonpfS the latest version. An it only been running for a week or so. I had thought of uninstall blocker an do it again, it but figured later on after I got it all set up working right then decide to tinker an break it rather not redo it all over again. I know there a back up option also..

[RonpfS]

Can you add a new IPV4 group ? Maybe PRI3 will show up.

Search the forum for similar issue, it has been seen before.
Look at the config.xml, maybe you have empty config statement

   	</pfblockerng>
...
   	<pfblockernglistsv4>
...
   			<config>
   			</config>
....

[freefall]

@RonpfS just to let you know the reinstall fix it. It seems the dev version has some list auto include to download an install.. don't remember see those before. But in the dnsbl I see where I can remove them. It could of happen when I switch from non dev to dev without disabling it not sure

So thanks you all who comment on my post for helping me

[RonpfS]

@freefall said in Pfblockerng using feeds:

It could of happen when I switch from non dev to dev without disabling it not sure

It better to disable a package before updating /removing/re installing it.

Glad to see your found a cure :D

[Bambos]

hello everyone,

sorry that i bring this post back after long time, i have search the forum before decide making a new thread, so this post seems suitable to me.

I'm scrolling all those feeds in pfblocker ng 3 and i don't know what to do, what to import and why...

Is it bad to import all ?? what do you suggest ?

and if someone wants to import all feeds, is there any faster way ? i do feeds, hit the + icon, enable all button to make options on, click save below... add the next one. after i do an update for all together. Any better option to enable ?

[Uglybrian]

@bambos Hi, I would suggest you start with the set up wizard for pfBlocker-NG-devel.
The learning curve for pf bocker can be steep, so go slow and read everything......twice.
In addition, go to the help on your pfSense dashboard, then click pf Sense book and navagate to pf blocker package and read up. just type pf blocker in the search of the book.This will give you a good start and basic understanding.