Is the following configuraiton possible with the GUI/CLI?

[avvero]

Hello,

We have the following configuration running on a Linux system, but looking for a commercial solution. This is required for VxLAN.

Is this possible on pfsense?

router bgp 65000
  bgp router-id 10.10.0.1
  bgp cluster-id 10.10.0.1
  bgp log-neighbor-changes
  no bgp default ipv4-unicast
  neighbor fabric peer-group
  neighbor fabric remote-as 65000
  neighbor fabric capability extended-nexthop
  neighbor fabric update-source 10.10.0.1
  bgp listen range 10.10.0.0/24 peer-group fabric
  !
  address-family l2vpn evpn
   neighbor fabric activate
   neighbor fabric route-reflector-client
   advertise-all-vni
  exit-address-family
  !
!

[Zawi]

yes BGP is provided via FRR package .

You need to :

Enable Services>FRR>Global Settings.
Enable BGP.
Configure Neighbors.

[avvero]

@zawi can you explain where to set the l2vpn evpn neighbours ?

[A Former User]

@avvero

VXLAN isn't available on pfSense in any stable Release yet. According to release notes it will be implemented in version 2.5.0.