pfBlockerNG v3.0.0_6 update

A Former User

Screen Shot 2020-12-19 at 12.31.33.png

First and third are a no go for sure, I can live with that. The second, static leases, would be a show stopper. I need to be able to resolve those devices and do reverse lookup for them.

Of course using the non python mode removes these restrictions.

SteveITS

@teamits said in pfBlockerNG v3.0.0_6 update:

Was DShield removed

Looks like it was renamed to the ISC Block list.

xppx99

Hello,

Today I found an alert in PfblockerNG alerts - "DNSBL (Python mode) is out of sync. Perform a Force Reload to correct."

Screenshot 2020-12-21 at 10.27.31.png

I've done a few force reloads but this wont change. Also disabled/enable pfblockerng but no change.
Am I missing something?

I'm using 3.0.0._6 version, python mode enabled.

Thanks

Gertjan

@xppx99

You can check what happens in the log, shown during the force update :
This it would should show :

....
Database Sanity check [  PASSED  ]
------------------------
Masterfile/Deny folder uniq check
Deny folder/Masterfile uniq check
....

Your shows :

Database Sanity check [  FAILED  ] ** These two counts should match! **

Normally, you shouldn't leave log messages with text like 'FAILED' .... ;)
When you see FAILED somewhere it will pop up elsewhere .... like in the middle of the dashboard.

You can see the file here : /var/unbound/var/log/pfblockerng/pfblockerng.log
What counts is the last PASSED or FAILED occurrence.
You could also see here Firewall > pfBlockerNG > Log Browser and view this file.

I guess you have a feed/list that fails or contains invalid info - check them one by one.
Make sure that " ** These two counts should match! ** " (whatever that may means) goes away.

Or pastebin the log, and show it here.

BBcan177

@gertjan @xppx99
https://forum.netgate.com/topic/158947/dsnbl-out-of-sync/5

xppx99

@gertjan

I detect no problems in the log... Searching for "FAILED" detects no results:

Database Sanity check [  PASSED  ]
------------------------
Masterfile/Deny folder uniq check
Deny folder/Masterfile uniq check

Sync check (Pass=No IPs reported)
----------

@BBcan177

I have no TLD custom blacklist and whitelist, and I checked all the feed Headers and they are unique.

Assembling DNSBL database...... completed [ 12/21/20 15:30:32 ]
TLD:
TLD analysis...xxxxx completed [ 12/21/20 15:30:36 ]

  ** TLD Domain count exceeded. [ 300000 ] All subsequent Domains listed as-is **

TLD finalize...
 ----------------------------------------
 Original    Matches    Removed    Final     
 ----------------------------------------
 674635      236040     28482      646153    
 -----------------------------------------
TLD finalize... completed [ 12/21/20 15:30:38 ]

Saving DNSBL statistics... completed [ 12/21/20 15:30:39 ]
Reloading Unbound Resolver (DNSBL python).
Stopping Unbound Resolver.
Unbound stopped in 2 sec.
Additional mounts (DNSBL python):
  No changes required.
Starting Unbound Resolver... completed [ 12/21/20 15:30:42 ]
Resolver cache restored [ 12/21/20 15:30:43 ]
*** DNSBL update [ 646153 ] [ 571350 ] ... OUT OF SYNC ! ***

Edit: forgot to add the full log:
log@pastebin

xppx99

I disabled all DNSLB feeds, and enabled them one by one (after doing a force reload for each one) and now I dont have the problem.

xppx99

@xppx99 So something is definatly going on, because after a few hours the same issue arises:

BBcan177

@xppx99
Run a Force Reload - DNSBL and post the log for review.

Lanna

@bbcan177 said in pfBlockerNG v3.0.0_6 update:

Add preliminary DNSBL Group Policy configuration that will globally bypass DNSBL for the defined LAN IPs

Thank god for this new functionality, thank god! (well, thank bbcan177!!!)
Sure looking forward to the CIDR notation