Help trying to get EAP-TLS working (Pfsense / Unifi)

alnico

I also have tried to import the certificate on a brand new Windows 10 laptop, still no luck with getting it to work.

NogBadTheBad

@alnico You can also do a radsniff -x on your pfSense box to help diagnose radius issues.

Any reason why you're using nonstandard ports for radius ?

Are you trying to do radius assigned VLANS or just WPA2 Enterprise?

Try switching off Enable RADIUS assigned VLAN for wired network & Enable RADIUS assigned VLAN for wireless network if you don't need it.

alnico

@nogbadthebad I am using non standard ports as I used the standard ports for OpenVPN authentication. I wasn't sure if I was to reuse the same ports for EAP-TLS, so I changed them.

Radsniff did not throw up anything unfortunately.

[2.4.5-RELEASE][admin@pfsense.home]/root: radsniff -x
Logging all events
Defaulting to capture on all interfaces
Sniffing on (pppoe0 mvneta1 ovpns1 mvneta2 mvneta1.100 mvneta1.101 mvneta1.102 mvneta1.103 lo0 pflog0 mvneta0)
^CDone sniffing

NogBadTheBad

@alnico If radsniff doesn't show anything radius requests aren't hitting your router.

[2.4.5-RELEASE][admin@pfsense.xxxxxxx.net]/root: radsniff -x
Logging all events
Defaulting to capture on all interfaces
Sniffing on (igb0 pppoe0 igb1 ovpnc1 igb0.2 ovpnc2 igb0.3 ovpnc3 igb0.4 igb0.5 igb0.6 igb0.7 igb0.9 igb0.11 lo0 pflog0 igb2 igb3 igb4 igb5)
2021-01-27 10:01:22.364260 (1) Access-Request Id 165 igb0:172.16.1.11:56877 -> 172.16.0.1:1812 +0.000
	User-Name = "andyk"
	NAS-IP-Address = 172.16.1.11
	Service-Type = Framed-User
	Framed-MTU = 1400
	Called-Station-Id = "A2-2A-A8-98-9D-8C:L-Space RADIUS"
	Calling-Station-Id = "40-9C-28-A2-E0-7E"
	NAS-Identifier = "a22aa8989d8c"
	NAS-Port-Type = Wireless-802.11
	Acct-Session-Id = "1144BCBA29D7B258"
	Acct-Multi-Session-Id = "554A8AF77C09B840"
	Connect-Info = "CONNECT 0Mbps 802.11b"
	EAP-Message = 0x029e000a01616e64796b
	Message-Authenticator = 0xb7eeadb31283e15a427c4d5c75d5b0aa
	WLAN-Pairwise-Cipher = 1027076
	WLAN-Group-Cipher = 1027076
	WLAN-AKM-Suite = 1027073
	Authenticator-Field = 0x3c008709e2d48bd8beb64afdded32fba
2021-01-27 10:01:22.371210 (2) Access-Challenge Id 165 igb0:172.16.1.11:56877 <- 172.16.0.1:1812 +0.000 +0.000
	State = 0x70c07eb4705f677d3e006abac136d6d9
	EAP-Message = 0x019f00061920
	Message-Authenticator = 0x869a29563272722653e6bfb1aed13cea
	Authenticator-Field = 0xe633d547195ee13f9163c1684b7fa6a1
2021-01-27 10:01:22.102423 (3) Access-Request Id 166 igb0:172.16.1.11:56877 -> 172.16.0.1:1812 +0.065
	User-Name = "andyk"
	NAS-IP-Address = 172.16.1.11
	Service-Type = Framed-User
	Framed-MTU = 1400
	State = 0x70c07eb4705f677d3e006abac136d6d9
	Called-Station-Id = "A2-2A-A8-98-9D-8C:L-Space RADIUS"
	Calling-Station-Id = "40-9C-28-A2-E0-7E"
	NAS-Identifier = "a22aa8989d8c"
	NAS-Port-Type = Wireless-802.11
	Acct-Session-Id = "1144BCBA29D7B258"
	Acct-Multi-Session-Id = "554A8AF77C09B840"
	Connect-Info = "CONNECT 0Mbps 802.11b"
	EAP-Message = 0x029f00a119800000009716030100920100008e0303601139f2571834ca6ebc5341a674636aa379c3a9370ff71263f82291b053158500002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00020100000d00120010040102010501060104030203050306030005000501000000000012000000170000
	Message-Authenticator = 0x8b989303eae341b82a73953e5e15c8be
	WLAN-Pairwise-Cipher = 1027076
	WLAN-Group-Cipher = 1027076
	WLAN-AKM-Suite = 1027073
	Authenticator-Field = 0xd5b7f3c7255c764eecc669418304edcb
2021-01-27 10:01:22.108220 (4) Access-Challenge Id 166 igb0:172.16.1.11:56877 <- 172.16.0.1:1812 +0.071 +0.005
	State = 0x70c07eb47160677d3e006abac136d6d9
	EAP-Message = 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
	Message-Authenticator = 0xc1a12306ccc180dfa7d77c416b94ce21
	Authenticator-Field = 0xceb2c5b0a11d650b8a51df2b97a6105a

Also try a radtest while running radsniff -x

What does your NAS / Client view look like, it should be something like this, radius requests come from the Unifi APs rather than the controller:-

Screenshot 2021-01-27 at 10.15.31.png

Another reason why Ubiquity will never make it big in the enterprise market.

NogBadTheBad

I'd try to get radtest working from the pfSense box first.

alnico

Thanks @NogBadTheBad

This are the settings:
Interfaces:

I've created an account 'laptop' with password 'abcd1234' (for testing) and these are the results from inside the SG3100:

[2.4.5-RELEASE][admin@pfsense.home]/root: radtest laptop abcd1234 127.0.0.1 10 abcd1234
Sent Access-Request Id 150 from 0.0.0.0:33851 to 127.0.0.1:1812 length 76
       User-Name = "laptop"
       User-Password = "abcd1234"
       NAS-IP-Address = 172.25.10.1
       NAS-Port = 10
       Message-Authenticator = 0x00
       Cleartext-Password = "abcd1234"
Sent Access-Request Id 150 from 0.0.0.0:33851 to 127.0.0.1:1812 length 76
       User-Name = "laptop"
       User-Password = "abcd1234"
       NAS-IP-Address = 172.25.10.1
       NAS-Port = 10
       Message-Authenticator = 0x00
       Cleartext-Password = "abcd1234"
Sent Access-Request Id 150 from 0.0.0.0:33851 to 127.0.0.1:1812 length 76
       User-Name = "laptop"
       User-Password = "abcd1234"
       NAS-IP-Address = 172.25.10.1
       NAS-Port = 10
       Message-Authenticator = 0x00
       Cleartext-Password = "abcd1234"
(0) No reply from server for ID 150 socket 3
[2.4.5-RELEASE][admin@pfsense.home]/root:

This is what shows up on Radsniff on another putty session:

These are the firewall rules on the LAN side:
LAN rules.png

Still no luck "(0) No reply from server for ID 150 socket 3" seems to be the key.

johnpoz

Did you follow the instructions given here for testing.

https://pfsense-docs.readthedocs.io/en/latest/usermanager/testing-freeradius.html

I just did and boom - works

[2.4.5-RELEASE][admin@sg4860.local.lan]/root: radtest testuser testpassword 127.0.0.1:1812 0 testing123
Sent Access-Request Id 98 from 0.0.0.0:61162 to 127.0.0.1:1812 length 78
        User-Name = "testuser"
        User-Password = "testpassword"
        NAS-IP-Address = 192.168.9.253
        NAS-Port = 0
        Message-Authenticator = 0x00
        Cleartext-Password = "testpassword"
Received Access-Accept Id 98 from 127.0.0.1:1812 to 127.0.0.1:61162 length 20
[2.4.5-RELEASE][admin@sg4860.local.lan]/root:

Make sure you turn on logging in freerad, and if you do something wrong you get a log entry with some clue to why..

Here I changed the secret and it fails

[2.4.5-RELEASE][admin@sg4860.local.lan]/root: radtest testuser testpassword 127.0.0.1:1812 0 badpass
Sent Access-Request Id 16 from 0.0.0.0:17422 to 127.0.0.1:1812 length 78
        User-Name = "testuser"
        User-Password = "testpassword"
        NAS-IP-Address = 192.168.9.253
        NAS-Port = 0
        Message-Authenticator = 0x00
        Cleartext-Password = "testpassword"
Sent Access-Request Id 16 from 0.0.0.0:17422 to 127.0.0.1:1812 length 78
        User-Name = "testuser"
        User-Password = "testpassword"
        NAS-IP-Address = 192.168.9.253
        NAS-Port = 0
        Message-Authenticator = 0x00
        Cleartext-Password = "testpassword"
Sent Access-Request Id 16 from 0.0.0.0:17422 to 127.0.0.1:1812 length 78
        User-Name = "testuser"
        User-Password = "testpassword"
        NAS-IP-Address = 192.168.9.253
        NAS-Port = 0
        Message-Authenticator = 0x00
        Cleartext-Password = "testpassword"
(0) No reply from server for ID 16 socket 3
[2.4.5-RELEASE][admin@sg4860.local.lan]/root:

NogBadTheBad

The radius requests come from the AP not the Unifi controller, is 172.25.10.1 your ap ?

If it isn’t you need to add the ap.

johnpoz

he needs to get the simple local test working first ;)

alnico

My pfsense router (SG-3100) IP is 172.25.10.1.
Unifi AP ip is 172.25.10.2
Controller version upgraded to 6.0.45
Radius package version is 0.15.7_21
Radius logging destination is set to System Logs

I blew away all the prior configs (interface and NAS), rebooted the router, and managed to get an output from inside pfsense using the test case. Output below:

[2.4.5-RELEASE][admin@pfsense.home]/root: radtest testuser testpassword 127.0.0.1:1812 0 testing123
Sent Access-Request Id 195 from 0.0.0.0:57096 to 127.0.0.1:1812 length 78
        User-Name = "testuser"
        User-Password = "testpassword"
        NAS-IP-Address = 172.25.10.1
        NAS-Port = 0
        Message-Authenticator = 0x00
        Cleartext-Password = "testpassword"
Received Access-Accept Id 195 from 127.0.0.1:1812 to 127.0.0.1:57096 length 20

I now recreated a new NAS/Client and Interface and changed the Secret in the unifi controller to "testing123". This is what it looks like now:

I guess so far so good? Logically the next step is to test Unifi talking to pfsense I suppose - I can SSH into the unifi AP but can't seem to find a command such as Radtest that I can use. Does anyone have the EAP settings in FreeRadius and Unifi that they can share?

If I ever get this to work - I will write a user guide to configure Unifi with Pfsense :)

NogBadTheBad

@alnico said in Help trying to get EAP-TLS working (Pfsense / Unifi):

I guess so far so good? Logically the next step is to test Unifi talking to pfsense I suppose - I can SSH into the unifi AP but can't seem to find a command such as Radtest that I can use. Does anyone have the EAP settings in FreeRadius and Unifi that they can share?

If I ever get this to work - I will write a user guide to configure Unifi with Pfsense :)

radtest isn't available on the ap, I just checked.

Here's what I have set:-

Screenshot 2021-01-28 at 12.08.36.png

Screenshot 2021-01-28 at 12.15.42.png

Screenshot 2021-01-28 at 12.09.45.png

Screenshot 2021-01-28 at 12.10.00.png

alnico

@nogbadthebad no still no good. Apologies for the delay in getting back, I had some pressing things I needed to attend to.

I will wait for the new pfsense update (since its due this month) and then see how I go.

johnpoz

Not sure what you believe is going to change with how freerad works with 2.5?

Simple way to validate - is look at your log, and just sniff. Do you see traffic hitting pfsense from your AP?