Access site to site networks through remote access setup
-
Hello everyone.
I have working setups of:
Firewall A
Physical networks:
192.168.1.0/24
192.168.8.0/24
192.168.16.0/24Site to site between firewall A 192.168.16.0 & a firewall B: 192.168.27.0 through site to site shared key setup (working both directions)
Remote access vpn (road warrior) on firewall A, added all the physical networks for access, all working (1,8,16 Lans). Then i also added the 27 network which is through a site to site VPN tunnel, and cant get route to it with remote access VPN, even i can see it in route print. Firewall A can communnicate normally with firewall B from the physical networks 16, but not from road warrior VPN, which road warrior VPN can access network 16.
Is it firewall A setup issue not giving the route, or windows metric issue ? What i can check?
-
@bambos Did you route the Remote Access tunnel network over the VPN on firewall B so traffic flows the other way?
Do the firewall rules on both OpenVPN tabs on both firewalls pass the necessary traffic?
-
@derelict said in Access site to site networks through remote access setup:
@bambos Did you route the Remote Access tunnel network over the VPN on firewall B so traffic flows the other way?
Do the firewall rules on both OpenVPN tabs on both firewalls pass the necessary traffic?
@Derelict actually your first comment was right on point.
I have set on firewall B, on site to site settings, in the field of remote networks, i have added the tunnel IP of road warrior VPN. Thank you very much for your help.I know you know, i just explain it here for future reference, maybe someone need it.