XG-7100 1U - Switching LAN from LAGG0 to IX0
-
I have an XG-7100 configured with my LAN interface assigned to the lagg0 network port. I would like to change this to the ix0 port.
After reading a bunch of posts on the forum, it seemed like I just had to click on the dropdown and choose the ix0 port. I made and applied the changes and promptly lost any traffic over the LAN.
Am I missing something? Do I need to do anything else differently? I had to console into the box and reassign the interface to the correct network port.
I'm not ruling out that my switch could be the problem. I just am trying to rule out the pfSense side of things. I do have the SFP port on the switch tagging all VLAN traffic and leaving basic LAN traffic untagged. It shouldn't be the problem as it currently mimics exactly the current trunk port on the switch. But I've been embarassed by far too many managed switches to rule it out.
tl;dr - how do I configure LAN to use the ix0 port?
Thanks guys. I hope this is the right place for this topic. If not, I can repost in the appropriate area.