Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    VDSL2 Einwahl mit 1und1

    Deutsch
    3
    9
    3.3k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • V
      vRod
      last edited by

      Hi zsammen,

      Es gibt bestimmt jemand hier im Forum die erklären können, wie ein VDSL2 Verbindung bei 1und1 eingerichtet werden soll. :)

      Erstmal Entschulding wegen meiner Deutsch, ich komme aus der Ausland.

      Ich bekomme am unser neue Haus ein 250/40 VDSL2 Leitung von 1und1. Als Modem habe ich ein Draytek Vigor 165 gekauft, aktuell läuft FW 4.0.5_STD. Alles standard (Modem wurde auf werkseinstellungen zurückgesetzt).

      Dahinter steckt ein pfsense 2.5.1, frisch installiert. Problem ist das die Verbindung hergestellt wird, dann ein paar minuten später brickt es ab und ich muss das modem neustarten. Internet geht gar nicht (sieht man wegen der OpenVPN client)

      Als WAN Interface habe ich folgendes eingerichtet:

      WAN

      • Enable Interface: Check

      • IPv4 Configuration Type: PPPoE

      • IPv6 Configuration Type: DHCP6

      • MTU: 1492

      • Use IPv4 connectivity as parent interface: Check

      • Request only an IPv6 prefix: Check

      • DHCPv6 Prefix Delegation Size: 56

      • Send IPv6 prefix hint: Check

      Username: H1und1/etc@online.de
      Password: (ja)

      Muss ich was anderes konfigurieren?

      Hier die logs:

      Apr 16 16:08:21 fw ppp[35715]: PPPoE: rec'd ACNAME "SOGJ03"
Apr 16 16:08:21 fw ppp[35715]: [wan_link0] PPPoE: connection successful
Apr 16 16:08:21 fw ppp[35715]: [wan_link0] Link: UP event
Apr 16 16:08:21 fw ppp[35715]: [wan_link0] LCP: Up event
Apr 16 16:08:21 fw ppp[35715]: [wan_link0] LCP: state change Starting --> Req-Sent
Apr 16 16:08:21 fw ppp[35715]: [wan_link0] LCP: SendConfigReq #1
Apr 16 16:08:21 fw ppp[35715]: [wan_link0]   PROTOCOMP
Apr 16 16:08:21 fw ppp[35715]: [wan_link0]   MRU 1492
Apr 16 16:08:21 fw ppp[35715]: [wan_link0]   MAGICNUM 0x64aeb43e
Apr 16 16:08:21 fw ppp[35715]: [wan_link0] LCP: rec'd Configure Ack #1 (Req-Sent)
Apr 16 16:08:21 fw ppp[35715]: [wan_link0]   PROTOCOMP
Apr 16 16:08:21 fw ppp[35715]: [wan_link0]   MRU 1492
Apr 16 16:08:21 fw ppp[35715]: [wan_link0]   MAGICNUM 0x64aeb43e
Apr 16 16:08:21 fw ppp[35715]: [wan_link0] LCP: state change Req-Sent --> Ack-Rcvd
Apr 16 16:08:23 fw ppp[35715]: [wan_link0] LCP: state change Ack-Rcvd --> Req-Sent
Apr 16 16:08:23 fw ppp[35715]: [wan_link0] LCP: SendConfigReq #2
Apr 16 16:08:23 fw ppp[35715]: [wan_link0]   PROTOCOMP
Apr 16 16:08:23 fw ppp[35715]: [wan_link0]   MRU 1492
Apr 16 16:08:23 fw ppp[35715]: [wan_link0]   MAGICNUM 0x64aeb43e
Apr 16 16:08:23 fw ppp[35715]: [wan_link0] LCP: rec'd Configure Ack #2 (Req-Sent)
Apr 16 16:08:23 fw ppp[35715]: [wan_link0]   PROTOCOMP
Apr 16 16:08:23 fw ppp[35715]: [wan_link0]   MRU 1492
Apr 16 16:08:23 fw ppp[35715]: [wan_link0]   MAGICNUM 0x64aeb43e
Apr 16 16:08:23 fw ppp[35715]: [wan_link0] LCP: state change Req-Sent --> Ack-Rcvd
Apr 16 16:08:24 fw ppp[35715]: [wan_link0] LCP: rec'd Configure Request #41 (Ack-Rcvd)
Apr 16 16:08:24 fw ppp[35715]: [wan_link0]   MRU 1492
Apr 16 16:08:24 fw ppp[35715]: [wan_link0]   AUTHPROTO PAP
Apr 16 16:08:24 fw ppp[35715]: [wan_link0]   MAGICNUM 0x3901b505
Apr 16 16:08:24 fw ppp[35715]: [wan_link0] LCP: SendConfigAck #41
Apr 16 16:08:24 fw ppp[35715]: [wan_link0]   MRU 1492
Apr 16 16:08:24 fw ppp[35715]: [wan_link0]   AUTHPROTO PAP
Apr 16 16:08:24 fw ppp[35715]: [wan_link0]   MAGICNUM 0x3901b505
Apr 16 16:08:24 fw ppp[35715]: [wan_link0] LCP: state change Ack-Rcvd --> Opened
Apr 16 16:08:24 fw ppp[35715]: [wan_link0] LCP: auth: peer wants PAP, I want nothing
Apr 16 16:08:24 fw ppp[35715]: [wan_link0] PAP: using authname "H1und1/xxxxxx@online.de"
Apr 16 16:08:24 fw ppp[35715]: [wan_link0] PAP: sending REQUEST #1 len: 41
Apr 16 16:08:24 fw ppp[35715]: [wan_link0] LCP: LayerUp
Apr 16 16:08:24 fw ppp[35715]: [wan_link0] PAP: rec'd ACK #1 len: 58
Apr 16 16:08:24 fw ppp[35715]: [wan_link0]   MESG: [UI-SBR:241209,46016;UI-LINEID:1UND1.DEU.DTAG.DVJD8;]
Apr 16 16:08:24 fw ppp[35715]: [wan_link0] LCP: authorization successful
Apr 16 16:08:24 fw ppp[35715]: [wan_link0] Link: Matched action 'bundle "wan" ""'
Apr 16 16:08:24 fw ppp[35715]: [wan_link0] Link: Join bundle "wan"
Apr 16 16:08:24 fw ppp[35715]: [wan] Bundle: Status update: up 1 link, total bandwidth 64000 bps
Apr 16 16:08:24 fw ppp[35715]: [wan] IPCP: Open event
Apr 16 16:08:24 fw ppp[35715]: [wan] IPCP: state change Initial --> Starting
Apr 16 16:08:24 fw ppp[35715]: [wan] IPCP: LayerStart
Apr 16 16:08:24 fw ppp[35715]: [wan] IPV6CP: Open event
Apr 16 16:08:24 fw ppp[35715]: [wan] IPV6CP: state change Initial --> Starting
Apr 16 16:08:24 fw ppp[35715]: [wan] IPV6CP: LayerStart
Apr 16 16:08:24 fw ppp[35715]: [wan] IPCP: Up event
Apr 16 16:08:24 fw ppp[35715]: [wan] IPCP: state change Starting --> Req-Sent
Apr 16 16:08:24 fw ppp[35715]: [wan] IPCP: SendConfigReq #1
Apr 16 16:08:24 fw ppp[35715]: [wan]   IPADDR 0.0.0.0
Apr 16 16:08:24 fw ppp[35715]: [wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Apr 16 16:08:24 fw ppp[35715]: [wan] IPV6CP: Up event
Apr 16 16:08:24 fw ppp[35715]: [wan] IPV6CP: state change Starting --> Req-Sent
Apr 16 16:08:24 fw ppp[35715]: [wan] IPV6CP: SendConfigReq #1
Apr 16 16:08:24 fw ppp[35715]: [wan] IPCP: rec'd Configure Request #123 (Req-Sent)
Apr 16 16:08:24 fw ppp[35715]: [wan]   IPADDR 62.155.244.227
Apr 16 16:08:24 fw ppp[35715]: [wan]     62.155.244.227 is OK
Apr 16 16:08:24 fw ppp[35715]: [wan] IPCP: SendConfigAck #123
Apr 16 16:08:24 fw ppp[35715]: [wan]   IPADDR 62.155.244.227
Apr 16 16:08:24 fw ppp[35715]: [wan] IPCP: state change Req-Sent --> Ack-Sent
Apr 16 16:08:24 fw ppp[35715]: [wan] IPCP: rec'd Configure Reject #1 (Ack-Sent)
Apr 16 16:08:24 fw ppp[35715]: [wan]   COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
Apr 16 16:08:24 fw ppp[35715]: [wan] IPCP: SendConfigReq #2
Apr 16 16:08:24 fw ppp[35715]: [wan]   IPADDR 0.0.0.0
Apr 16 16:08:24 fw ppp[35715]: [wan] IPV6CP: rec'd Configure Request #106 (Req-Sent)
Apr 16 16:08:24 fw ppp[35715]: [wan] IPV6CP: SendConfigAck #106
Apr 16 16:08:24 fw ppp[35715]: [wan] IPV6CP: state change Req-Sent --> Ack-Sent
Apr 16 16:08:24 fw ppp[35715]: [wan] IPCP: rec'd Configure Nak #2 (Ack-Sent)
Apr 16 16:08:24 fw ppp[35715]: [wan]   IPADDR xxx.xxx.xxx.xxx
Apr 16 16:08:24 fw ppp[35715]: [wan]     xxx.xxx.xxx.xxx is OK
Apr 16 16:08:24 fw ppp[35715]: [wan] IPCP: SendConfigReq #3
Apr 16 16:08:24 fw ppp[35715]: [wan]   IPADDR xxx.xxx.xxx.xxx
Apr 16 16:08:24 fw ppp[35715]: [wan] IPCP: rec'd Configure Ack #3 (Ack-Sent)
Apr 16 16:08:24 fw ppp[35715]: [wan]   IPADDR xxx.xxx.xxx.xxx
Apr 16 16:08:24 fw ppp[35715]: [wan] IPCP: state change Ack-Sent --> Opened
Apr 16 16:08:24 fw ppp[35715]: [wan] IPCP: LayerUp
Apr 16 16:08:24 fw ppp[35715]: [wan]   xxx.xxx.xxx.xxx -> yyy.yyy.yyy.yyy
Apr 16 16:08:24 fw check_reload_status[378]: rc.newwanip starting pppoe0
Apr 16 16:08:24 fw ppp[35715]: [wan] IFACE: Up event
Apr 16 16:08:24 fw ppp[35715]: [wan] IFACE: Rename interface ng0 to pppoe0
Apr 16 16:08:24 fw ppp[35715]: [wan] IPV6CP: rec'd Configure Ack #1 (Ack-Sent)
Apr 16 16:08:24 fw ppp[35715]: [wan] IPV6CP: state change Ack-Sent --> Opened
Apr 16 16:08:24 fw ppp[35715]: [wan] IPV6CP: LayerUp
Apr 16 16:08:24 fw ppp[35715]: [wan]   02e0:4cff:fe88:4311 -> 7ee2:caff:feb3:7b8f
Apr 16 16:08:24 fw check_reload_status[378]: rc.newwanipv6 starting pppoe0
Apr 16 16:08:25 fw php-fpm[340]: /rc.newwanip: rc.newwanip: Info: starting on pppoe0.
Apr 16 16:08:25 fw php-fpm[340]: /rc.newwanip: rc.newwanip: on (IP address: xxx.xxx.xxx.xxx) (interface: WAN[wan]) (real interface: pppoe0).
Apr 16 16:08:25 fw php-fpm[340]: /rc.newwanip: Default gateway setting Interface WAN_PPPOE Gateway as default.
Apr 16 16:08:25 fw php-fpm[340]: /rc.newwanip: Default gateway setting Interface WAN_DHCP6 Gateway as default.
Apr 16 16:08:25 fw php-fpm[340]: /rc.newwanip: IP Address has changed, killing states on former IP Address xxx.xxx.xxx.yyy.
Apr 16 16:08:25 fw php-fpm[44190]: /rc.newwanipv6: rc.newwanipv6: Info: starting on pppoe0.
Apr 16 16:08:25 fw php-fpm[44190]: /rc.newwanipv6: rc.newwanipv6: No IPv6 address found for interface WAN [wan].
Apr 16 16:08:31 fw php-fpm[340]: /rc.newwanip: Resyncing OpenVPN instances for interface WAN.
Apr 16 16:08:31 fw php-fpm[340]: /rc.newwanip: Creating rrd update script
Apr 16 16:08:33 fw php-fpm[340]: /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - xxx.xxx.xxx.yyy ->  xxx.xxx.xxx.xxx - Restarting packages.
Apr 16 16:08:33 fw check_reload_status[378]: Starting packages
Apr 16 16:08:34 fw php-fpm[44190]: /rc.start_packages: Restarting/Starting all packages.
Apr 16 16:09:44 fw ppp[35715]: [wan_link0] LCP: no reply to 1 echo request(s)
Apr 16 16:09:49 fw check_reload_status[378]: Syncing firewall
Apr 16 16:09:54 fw ppp[35715]: [wan_link0] LCP: no reply to 2 echo request(s)
Apr 16 16:10:00 fw check_reload_status[378]: Syncing firewall
Apr 16 16:10:01 fw kernel: tun1: changing name to 'ovpnc1'
Apr 16 16:10:01 fw php-fpm[84070]: /vpn_openvpn_client.php: The command '/sbin/route -q delete 172.20.253.2' returned exit code '1', the output was 'route: route has not been found'
Apr 16 16:10:01 fw kernel: ovpnc1: link state changed to UP
Apr 16 16:10:01 fw php-fpm[84070]: OpenVPN PID written: 27456
Apr 16 16:10:01 fw check_reload_status[378]: Reloading filter
Apr 16 16:10:01 fw check_reload_status[378]: rc.newwanip starting ovpnc1
Apr 16 16:10:02 fw php-fpm[44190]: /rc.newwanip: rc.newwanip: Info: starting on ovpnc1.
Apr 16 16:10:02 fw php-fpm[44190]: /rc.newwanip: rc.newwanip: on (IP address: 172.20.253.2) (interface: []) (real interface: ovpnc1).
Apr 16 16:10:02 fw php-fpm[44190]: /rc.newwanip: rc.newwanip called with empty interface.
Apr 16 16:10:02 fw check_reload_status[378]: Reloading filter
Apr 16 16:10:02 fw php-fpm[44190]: /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection -  ->  172.20.253.2 - Restarting packages.
Apr 16 16:10:02 fw check_reload_status[378]: Starting packages
Apr 16 16:10:03 fw php-fpm[84070]: /rc.start_packages: Restarting/Starting all packages.
Apr 16 16:11:13 fw check_reload_status[378]: Linkup starting re0
Apr 16 16:11:13 fw kernel: re0: link state changed to DOWN
Apr 16 16:11:14 fw check_reload_status[378]: Reloading filter
Apr 16 16:11:24 fw ppp[35715]: [wan_link0] LCP: no reply to 1 echo request(s)
Apr 16 16:11:34 fw ppp[35715]: [wan_link0] LCP: no reply to 2 echo request(s)
Apr 16 16:11:43 fw check_reload_status[378]: Linkup starting re0
Apr 16 16:11:43 fw kernel: re0: link state changed to UP
Apr 16 16:11:44 fw ppp[18002]: Multi-link PPP daemon for FreeBSD
Apr 16 16:11:44 fw ppp[18002]:
Apr 16 16:11:44 fw ppp[18002]: process 18002 started, version 5.9
Apr 16 16:11:44 fw ppp[18002]: waiting for process 35715 to die...
Apr 16 16:11:44 fw ppp[35715]: caught fatal signal TERM
Apr 16 16:11:44 fw ppp[35715]: [wan] IFACE: Close event
Apr 16 16:11:44 fw ppp[35715]: [wan] IPCP: Close event
Apr 16 16:11:44 fw ppp[35715]: [wan] IPCP: state change Opened --> Closing
Apr 16 16:11:44 fw ppp[35715]: [wan] IPCP: SendTerminateReq #4
Apr 16 16:11:44 fw ppp[35715]: [wan] IPCP: LayerDown
Apr 16 16:11:44 fw php-fpm[339]: /rc.linkup: calling interface_dhcpv6_configure.
Apr 16 16:11:44 fw php-fpm[339]: /rc.linkup: Accept router advertisements on interface re0
Apr 16 16:11:44 fw php-fpm[339]: /rc.linkup: Starting rtsold process
Apr 16 16:11:44 fw check_reload_status[378]: Rewriting resolv.conf
Apr 16 16:11:44 fw ppp[35715]: [wan] IFACE: Removing IPv4 address from pppoe0 failed(IGNORING for now. This should be only for PPPoE friendly!): Can't assign requested address
Apr 16 16:11:44 fw ppp[35715]: [wan] IPV6CP: Close event
Apr 16 16:11:44 fw ppp[35715]: [wan] IPV6CP: state change Opened --> Closing
Apr 16 16:11:44 fw ppp[35715]: [wan] IPV6CP: SendTerminateReq #2
Apr 16 16:11:44 fw ppp[35715]: [wan] IPV6CP: LayerDown
Apr 16 16:11:45 fw ppp[18002]: waiting for process 35715 to die...
Apr 16 16:11:45 fw check_reload_status[378]: Rewriting resolv.conf
Apr 16 16:11:45 fw ppp[35715]: [wan] IFACE: Down event
Apr 16 16:11:45 fw ppp[35715]: [wan] IFACE: Rename interface pppoe0 to pppoe0
Apr 16 16:11:46 fw ppp[35715]: [wan_link0] LCP: no reply to 3 echo request(s)
Apr 16 16:11:46 fw ppp[35715]: [wan] IPCP: SendTerminateReq #5
Apr 16 16:11:46 fw ppp[18002]: waiting for process 35715 to die...
Apr 16 16:11:46 fw check_reload_status[378]: Restarting ipsec tunnels
Apr 16 16:11:46 fw rtsold[37782]: Received RA specifying route fe80::6995:1dd2:e549:ec66 for interface wan(re0)
Apr 16 16:11:46 fw rtsold[37809]: RTSOLD Lock in place - sending SIGHUP to dhcp6c
Apr 16 16:11:46 fw ppp[35715]: [wan] IPV6CP: SendTerminateReq #3
Apr 16 16:11:47 fw ppp[18002]: waiting for process 35715 to die...
Apr 16 16:11:47 fw ppp[35715]: [wan] Bundle: Shutdown
Apr 16 16:11:47 fw ppp[35715]: [wan_link0] Link: Shutdown
Apr 16 16:11:47 fw ppp[35715]: process 35715 terminated
Apr 16 16:11:48 fw ppp[18002]: web: web is not running
Apr 16 16:11:48 fw ppp[18002]: [wan] Bundle: Interface ng0 created
Apr 16 16:11:48 fw ppp[18002]: [wan_link0] Link: OPEN event
Apr 16 16:11:48 fw kernel: ng0: changing name to 'pppoe0'
Apr 16 16:11:48 fw ppp[18002]: [wan_link0] LCP: Open event
Apr 16 16:11:48 fw ppp[18002]: [wan_link0] LCP: state change Initial --> Starting
Apr 16 16:11:48 fw ppp[18002]: [wan_link0] LCP: LayerStart
Apr 16 16:11:48 fw ppp[18002]: [wan_link0] PPPoE: Connecting to ''
Apr 16 16:11:57 fw ppp[18002]: [wan_link0] PPPoE connection timeout after 9 seconds
Apr 16 16:11:57 fw ppp[18002]: [wan_link0] Link: DOWN event
Apr 16 16:11:57 fw ppp[18002]: [wan_link0] LCP: Down event
Apr 16 16:11:57 fw ppp[18002]: [wan_link0] Link: reconnection attempt 1 in 2 seconds

      Danke im voraus, ich wäre sehr dankbar für eure Hilfe!!

      Gruß,
      Chris

      mike69M 1 Reply Last reply Reply Quote 0
      • mike69M
        mike69 Rebel Alliance @vRod
        last edited by

        Hallo @vrod

        Wo wird das VLAN konfiguriert, auf der Vigor oder der Sense?

        Der Link ist zwar schon älter, eventuell hilft es Dir.

        DG FTTH 400/200
        Supermicro A2SDi-4C-HLN4F with pfSense 2.7.2

        V 1 Reply Last reply Reply Quote 0
        • V
          vRod @mike69
          last edited by

          @mike69 Ja, der VLAN7 wird am modem gesetzt :). Ich habe es hinbekommen... aber es läuft für ne minute oder 2, dann geht der pppoe verbindung kaputt und kommt nicht mehr hoch. In der Zeit wo es läuft kann ich google pingen und webseiten browsen.

          Am DSL modem ist der status noch "SHOWTIME", also scheint es evtl. ein problem mit der pfsense zu sein.

          Ich habe ein Realtek NIC (der box ist temporär), kann das vielleicht probleme machen? Ich hole mal ne andere kiste mit anderen nics und evtl. version 2.4.5 und teste mal.

          Der Draytek Vigor 165 habe ich mittlerweile auf neuesten 4.2.5_STD Firmware gebracht :)

          Danke!
          Chris

          1 Reply Last reply Reply Quote 0
          • mike69M
            mike69 Rebel Alliance
            last edited by

            @vrod said in VDSL2 Einwahl mit 1und1:

            Hatte kurzzeitig ebenfalls die Vigor 165, meine nach einem Reset macht die kein VLAN tagging von Hause aus.

            Am DSL modem ist der status noch "SHOWTIME", also scheint es evtl. ein problem mit der pfsense zu sein.

            Also kommst du auf die Vigor rauf.
            Showtime ist richtig, steht bei mir auch. Eventuell eine Macke in der DSL Leitung?

            Zufällig noch eine andere Hardware an der Hand?

            DG FTTH 400/200
            Supermicro A2SDi-4C-HLN4F with pfSense 2.7.2

            V 1 Reply Last reply Reply Quote 0
            • V
              vRod @mike69
              last edited by

              @mike69 Leider ist es ein bisschen knapp mit der hardware im moment. :( Ich probiere mal mit pfsense 2.4.5 und ein opnsense image um zu schauen ob es ein unterschied macht. wenn nicht, kann ich zur not ein andere server holen. Finde es halt komisch wie der pfsense sich verbindet, dann kriegt er lcp timeouts und woop, verbindung weg.

              Danke dir erstmal!

              Chris

              W 1 Reply Last reply Reply Quote 0
              • W
                wkn @vRod
                last edited by

                @vrod

                Ich nutze hier auch ein Vigor165 vor der pfSense (2.5.1) an einem Telekom-Anschluss.

                Vigor165 läuft im Full-Bridge-Mode ohne VLAN-Tagging (VLAN7 bei der Telekom erforderlich). Firmware nutze ich die V4.2.3-MDM2.

                d3167dcd-0f64-46df-b4d1-cc0818f1a3c9-grafik.png

                f57faaa1-bbdc-4e9d-bf3e-49b364d08e46-grafik.png

                pFsense macht dann PPPoE über VLAN7-WAN.

                V 1 Reply Last reply Reply Quote 1
                • V
                  vRod @wkn
                  last edited by

                  Ok so.. war heute wieder am gucken. Hab mit opnsense und pfsense 2.4.5 versucht, kein änderung. Danach versucht das Modem als Router einzustellen, da ging die verbindung für 10sek, dan wieder offline.

                  Hab mit 1und1, da habe ich auch herausgefunden dass jemand mit von DS-Lite auf Dual Stack umgestellt hat, ohne darüber zu informieren.

                  Am ende habe ich ein FritzBox 7590 in der Nähe gefunden und hier hat es problemlos geklappt. Seit 16 uhr internet ohne ende. :) Ich vermute jetzt entweder ein Problem oder config-fehler auf der Draytek/pfsense.

                  @wkn konntesr du mir evtl. Dein pfsense config zeigen? Wäre interessant zu wissen wie es da eingerichtet ist. :)

                  W 1 Reply Last reply Reply Quote 0
                  • W
                    wkn @vRod
                    last edited by

                    @vrod

                    89419193-ad65-47db-911d-d23f05c2e40d-grafik.png

                    fe30572f-c614-4087-b0c9-c0ab30b58c59-grafik.png

                    029a47bf-d7fb-4b48-b14e-ed2b1582ee09-grafik.png

                    7b4387c0-4ba2-46d2-907d-f93f6dcf916f-grafik.png

                    V 1 Reply Last reply Reply Quote 1
                    • V
                      vRod @wkn
                      last edited by

                      @wkn danke für die fotos! Ich werde es irgendwann, sobald ich wieder Zeit habe, probieren. :)

                      1 Reply Last reply Reply Quote 0
                      • First post
                        Last post
                      Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.