pfSense Plus 21.02-p1 Now Available

[Ramosel]

@jwj Agreed, but I wasn't asking if it was safe or "fine"... I was asking if there was any merit/value in updating if one wasn't running an SG-3100.

[A Former User]

@ramosel It fixes the one issue that was specific to the 3100. It doesn't address any other issues (as per Netgate), so the value on other devices would be zero. The harm also appears to be zero. If you are staring at an 'update available' notice or flashing led I'd update just to make that go away.

[stephenw10]

Yeah, there no need to update if a reboot is inconvenient for example. On other architectures 21.02p1 is effectively unchanged. But it is safe to do so.

Steve

[Ramosel]

@stephenw10 Awesome... thank you.

[johnpoz]

@stephenw10 said in pfSense Plus 21.02-p1 Now Available:

if a reboot is inconvenient for example

Exactly... I am prob just going to wait til the zfs correction for
https://redmine.pfsense.org/issues/11483

Is implemented, I would assume 21.0X or if a p2 comes out..

Reboots are always "inconvenient" ;)

The 3100s I have are stuck running what they are running until such time that I can get to office(es) or someone is onsite as smart hands, etc. While it would be nice to get them current - just not worth "any" risk of something going wrong.. Since offices don't have any staff there currently.

[pfBo]

Hi,

After upgrading my SG-3100 I'm seeing issues with fq_codel. I have limiters configured and it has been running fine before upgrading to 21.02-p1.

The firewall stops passing traffic when limiters are enabled and connecting to console all I see is these error messages over and over again:

fq_codel_new_sched cannot allocate memory for fq_codel configuration parameters
si_new new_sched error

My limiters and rules are configures as follows:

Please let me know if I can provide and more details, logs or anything else that can help me (and you) resolve this issue.

Best regards,

Bo

[pfBo]

Apologies, I can't for the life of me figure out how to edit my own post ;)

I just wanted to add that I have a SG-5100 setup with the exact same limiters and rules and that works flawlessly after upgrading to SG-3100 so I suspect it's a model specific "bug".

Best regards,

Bo

[StacyAnn33]

Are they still expecting to have pfSense Plus available to 3rd party hardware later in the year, or has that been pushed ahead to an earlier date?

[Ramosel]

@stacyann33 According to the Blog announcement on Jan 21 of this year... (under item #11)

"We plan to make pfSense Plus available for use on 3rd party hardware and select virtual machines by June 2021, if not sooner."

[Taz79]

Why is there no posts about 21.02.2 being available? Or has it been pulled back?

I'm having issues, my VPN to public internet connection is not working since the upgrade.. Tunnel is up but no communications.. Hosts in the alias list defining what computers should go via the VPN cannot even ping the router on the LAN side which is really strang.e..

[Taz79]

Never mind.. a restart of the OpenVPN service seems to have fixed the issue.. but anyway strange that there is no post about this update in here??

[Ramosel]

@taz79 said in pfSense Plus 21.02-p1 Now Available:

but anyway strange that there is no post about this update in here??

Yeah, I'd have to agree that it's odd there was no announcement of the(ir) forum. It was on the blog though.

https://www.netgate.com/blog/

Between the Blog, this forum, redmine and reddit... it's hard to know where to go and when to get the latest info "straight from the horse's mouth".

Hopefully they are all just really busy working through the problems on the 2.5/21.02 release.