Squid/SquidGuard NONE/409 and DNS issue

[aGeekhere]

@shawn8888
in squid under
Bypass Proxy for These Source IPs
add your device there

[shawn8888]

@ageekhere said in Squid/SquidGuard NONE/409 and DNS issue:

@shawn8888
in squid under
Bypass Proxy for These Source IPs
add your device there

I tried that, not working either. Which makes wonder if I am doing something wrong.

How should I test if a device goes to Internet directly or though a proxy?
Right now, because I set a block web site in SquidGuard, such as youtube.com. So, if I can access google.com but not youtube.com, I assume the proxy is working, because SquidGuard needs Squid to work. If I can access both, then it accesses directly. Is there a better way?

[aGeekhere]

@shawn8888
You can look at squid real time to see if that device comes up

[shawn8888]

@ageekhere

Thanks!

So I did all the below, and the bypass finally works:

1. setup the rules in LAN like this:

2. change the wpad.dat like this:

function FindProxyForURL(url, host) {
    if (isInNet(myIpAddress(), "192.168.100.159", "255.255.255.0")) ||
      (isInNet(myIpAddress(), "192.168.100.155", "255.255.255.0")) 
    return "DIRECT";
    return "PROXY 192.168.100.1:3128";
}

3. add Bypass Proxy for These Source IPs

[KOM]

@shawn8888 Something is wrong with your config. You don't need WPAD if you're still running transparent mode. It's one or the other.

[aGeekhere]

@kom
I think if you go direct with the WPAD the transparent proxy will see traffic going directly through port 80/443 and will redirect the traffic through the proxy again. So by adding the bypass in squid it prevents it from being routed through the transparent proxy.

If you turn off the transparent proxy and just rely on the WPAD some software may have connection issues.

[shawn8888]

@kom
If I disable transparent mode, then all my devices lost Internet. So honestly, at this point, I don't know if WPAD or transparent mode is working.
However, twitter image/video now works both on my PC and my iPad, and it didn't work before.

[aGeekhere]

@shawn8888
A way to test if the WPAD is working is temporary turn off the transparent proxy and make sure autoconfig in turn on. If you internet browser uses the proxy then it is working.

[shawn8888]

@ageekhere

What do you mean "autoconfig"?
I followed the help here:

If I turn off transparent mode and change firefox network settings:

Still no Internet. So I guess WPAD never worked...

[KOM]

@shawn8888 What happens when you try to resolve 'wpad' or 'wpad.yourdomain.lol' on your network? Does it come back with the IP address of the server holding the wpad.dat file? IIRC your wpad.dat file to live on an http server or a trusted https server. Any cert errors will stop the wpad file from being read.

[shawn8888]

@kom
I think I have followed all the steps on doc page.
Ping/dns is fine, and I can download the wpad.dat file from the browser.

One question though:
If the transparent mode works, why do you need wpad? Is that because transparent mode is bugy?

[aGeekhere]

@shawn8888
To set auto config in windows go to
Control Panel - Internet Properties - connections - LAN settings and select Automatically detect settings.

Make sure programs are set to Use system proxy settings.
Test with chrome for now as firefox in the past had an outstanding bug with auto configuring a proxy which i am not sure if it was fixed.

"If the transparent mode works, why do you need wpad? Is that because transparent mode is bugy?"

From memory transparent proxy can break certificates resulting in a failed connection, though someone with more knowledge would have to confirm the technical details.

Also in your WPAD add to the top

if (shExpMatch(host, "ENTER YOUR PFSENSE DOMAIN HERE")) return "DIRECT";

use https://app.thorsen.pm/proxyforurl for testing the WPAD for errors

[shawn8888]

@ageekhere

Thank you guys for the endless help. I haven't given up because of you!

My Internet properties look good.
Chrome also points to Auto detect.
My wpad.dat now looks like below and the proxy tester didn't complain
I also tested on my iPhone, iPad, same as my PC. As soon as I disable transparent mode, Internet drops.
I checked my iOS -> wifi -> HTTP PROXY -> Configure Proxy -> Automatic
All my devices can download the wpad.dat file from the browser:
http://192.168.100.1/wpad.dat

function FindProxyForURL(url,host)
{
if (shExpMatch(host, "pfsense.mydomain.com")) 
  return "DIRECT";

if (isInNet(myIpAddress(), "192.168.100.155", "255.255.255.0")) 
  return "DIRECT";

  return "PROXY 192.168.100.1:3128";
}

[aGeekhere]

@shawn8888
I think i see the issue

Under Additional BOOTP/DHCP Options change to

252 String "http://192.168.1.1/wpad.dat"
252 String "http://192.168.1.1/wpad.da"
252 String "http://192.168.1.1/proxy.pac"

Under DNS ResolverGeneral Settings Host Overrides add

wpad	YourPfsenseDomain	192.168.1.1	wpad

https://docs.netgate.com/pfsense/en/latest/recipes/http-client-proxy-wpad.html?highlight=wpad

"A WPAD host may be supplied via DHCP numbered option 252 (string value containing the entire URL to the WPAD file) or DNS, which is easy to do with the built-in DNS forwarder."

Make sure you get the correct YourPfsenseDomaid, something like pfsensedomain.local
You can check in windows by using cmd and look for Connection - specific DNS suffix

[shawn8888]

@ageekhere
no luck.
From what I read, you only need DHCP or dns resolver. I tried both, and still the same.
Even though I am complete newbie about wireshark, I gave it a shot. And I cannot even find string "wpad" in the logs.

[aGeekhere]

@shawn8888 Try Resetting the States, Diagnostics States Reset States.
Also try restarting your pc and router.

[KOM]

@shawn8888 Transparent mode isn't buggy per se, it's just that you have to consider other things when using it. You're trying to intercept a data stream that is trying to prevent you from doing so. You either need to install a trusted cert on every device that will use your transparent proxy to void MitM browser errors when using Splice/Bump, or no certs and you use Splice All. If transparent mode works for you then use that but I find explicit mode has less hassles.

Are you sure that your proxy works? What happens if you manually set a browser to use it?

[shawn8888]

@ageekhere
I reboot pfSense and client pc. wpad is still not working.

@KOM
"Splice All" is recommended in order to use squidguard, which is the main reason I use squid for.

My proxy ONLY works at Transparent mode.
I have tried turning off Transparent mode and setting proxy manually (set IP and port 3128) on my PC. But it seems that a lot of things are not working. For example, I can open speedteset.net, but when I hit "go" button, it never starts.

[KOM]

@shawn8888 When running in explicit mode, how does it not work exactly? What browser error are you getting? Squid normally just works right out of the box.

[shawn8888]

@kom
What do you mean by "explicit mode"?
Does that mean:
Disable both "Transparent mode" and "Enable SSL filtering.", and manually set clients to use ip:3128 as proxy?