Firewalling MAC addresses
-
Sir,
If you have these problems, have you considered os10/onie environment? (Brtables?)
I have zero experience with oboe things but this would seem wise.
Sincerely,
magrw2066 -
if your really worried you could always enable static arp.. Now someone trying to change and IP to get around a block would not be able to talk to pfsense from that different IP.
How many get their IPv6 address via ARP? Not many. ;)
The world is moving to IPv6 and most devices will be using privacy addresses that change every day. Filtering outgoing traffic only on IPv6 address will not work. Bottom line, pfSense & pf will have to be updated to the 21st century, if it's to be able to filter outgoing traffic. As I mentioned before, people have to get out of the IPv4 mindset, as many things are different in IPv6. Also, crippling network functionality is not the solution to this problem, as others in this thread seem to think.
-
Umm my response seems lost.
Try ONIE boxes(not OBIE) and/or brtables command.
Sincerely,
Magrw2066 -
Just want to say. You guys might want to change this wikipedia page:
https://en.wikipedia.org/wiki/Comparison_of_firewalls
Since it states that pfsense has rules for blocking by mac address. It deceives people (like me) to think that pfsense can block by mac address. -
This is one feature that should definitely be added. IPtables has it, IIRC. With IPv6 privacy addresses changing daily, it's not possible to have an IPv6 address rule that would last longer than a day.
-
I notice the last response is 2mo old, but... I am using SonicWalls with MAC addresses being used in the rules all the time - for the very reasons that the OP listed, with IPv6 being the more annoying bit for me.
Filtering by IP is about as effective as milking a boar.
Since I've used pfSense for ages and the SonicWall bits are kinda new to me I had asked an engineer how the Sonicwall does this effectively with such an anemic CPU, and was told that the rules essentially are updated when the MAC goes live on the network with whatever IP(s) the machine has. The documentation I've read for the Sonicwalls I've been managing indicate that they operate very similarly to how pfSense does, aside from not being based on pf.
Since we have to record this information anyways and validate against DHCP/ARP, I'm not sure how-come pfSense can't do this? We're running CPUs that are worlds better than the junk in even the expensive Sonicwalls, so even if there was some overhead, I think it should be possible and even feasible. However I will digress in that I am not a programmer, and there may be some code sitting in the way that makes this incredibly expensive to do.
It sure as heck would make my life much easier. I could set things to happen based on MAC and not give a crap what IP they have or if they manually set it to something else, or if they're using IPv6 which as stated before by OP and here is ineffective.
-
All I can say is: Go Gary!!!!! You rock! Speaking from the year 2021 here, we have to deal with random macs now, so we should been on top of this problem when Gary first suggested we should! We “should have” had the ability by now to not give IP addresses to random Mac clients, just for example. OP GARY where you at???
-
@nick-wollman Why in the world are we resurrecting this thread...especially if you understand that MACs are randomized/spoofed...
-
@skogs good morning!
Honestly, I just wanted to congratulate Gary for pushing through all of the backlash he got. Wonderful, someone who knows what he wants and pushes to get it. I can relate, people just want to keep things the way they are. Or like to shut down honest question posters in the first reply.And now that I’m reminded, I just might have a solution that Gary is looking for, if he’s still around.
-
Rock on.
Deny by default works nicely. :) -
@chris4916 said in Firewalling MAC addresses:
What would be interesting, at least to me, is to understand why you would want to implement FW rules based on MAC address. This is something I don't understand yet.
easy answer : because devices may end up being assigned multiple IP addresses, a rule against the device's MAC address is a more "fixed" allocation
easy answer : because devices may end up being assigned multiple IP addresses, a rule against the device's MAC address is a more "fixed" allocation.
Plus it's nice to have options.
I am sure others would have additional use cases
Either way, it's a valid firewall parameter with the other big players (eg: CISCO, etc), so why not pfSense ?
-
@nick-wollman
.... waiting .... what's the solution you are proposing in pfSense --- I am all ears :-) -
IMHO MAC based fire walling is really really needed !! I did already advocate for that a couple of times.
Two reasons for that:
- given malware you do not only have to protect your network against threats from the internet, but also against threats from within your own network
- ipv6, at least from the firewall standpoint IMHO it is a disaster
So where you could filter in the IPV4 world on IP-address to limit access or do the opposite allow something based on IP, that option is gone with IPV6.
And in both cases IPV4 and IPV6 the MAC-address is a better option to filter a machine than one of its perhaps many IP's addresses and address variants.
Yes I do know that:
- it is possible to change the mac address
(it is even simpler to change your ip) and - that pf the firewall below pfsense regrettable does not support mac filtering
(please mail the maintainer on free bsd forums) - that it is true mac is level-2 not three 3
- that you can generate an alarm if a new mac occurs on your network (there is an app for that, if you think that is useful)
All in all nothing is perfect !, but mac-filtering is given IPV6, really really of big value.
Louis
-
@louis2 said in Firewalling MAC addresses:
malware
If the presence of 'malware' needs MAC handling more then IP, then, I agree, you have very untrusted clients.
Use the captive portal, which is meant to be used when you have to deal with non trusted devices, and you'll be using the firewall pf and the firewall ipfw. ipfw can do level 2 and 3.Still, I'd like to understand why the MAC, or even IP, is important when you deal with malware.
Malware could be found in the data payload, which is non accessible to you. Remember : there is no http traffic anymore. Or mail that doesn't use some TLS.
Also, you could see the destination IP, but not the destination MAC, as this would be the MAC of the next up stream router. -
@louis2 What's your environment / LAN type?
Are you talking guest type access here, if the devices only need to talk out their default gateway and not to other devices on the LAN then set the LAN ports to a protected port so they can only connect to the default gateway.
Run some sort of IDS/IPS on your LAN interfaces.
-
MAC filtering will do absolutely nothing for incoming packets. The only MAC address you will see is from the next upstream router and nothing else.
-
@louis2 said in Firewalling MAC addresses:
that option is gone with IPV6.
How so - I have specific rules that have specific IPv6 addresses in them.. I only allow access to my ntp server IPv6 address.
IPv6 clients can use multiple IPv6 addresses, if you do not tell them not too. But specific IPv6 addresses can be assigned to clients. Where they only use that address. But generally speaking with IPv6 you would do the rules based on any IPv6 address in that prefix. If you have some device that needs to do something different than the rules on that vlan, then move them to another vlan where you can set the rules you want for that prefix - now specific IP address doesn't matter.
While agree that IPv6 brings changes to how things were done in the past with firewall rules - filtering on mac address is not a requirement to correctly firewall.. You just need to understand the differences that IPv6 brings to the table. Yes there is a learning curve there for sure - which is why I suggest - if your not up to the task, or do not have time currently to climb up the learning curve for IPv6 and all the differences it has - then just don't use it. There is nothing saying you need to use or allow for IPv6 on your network. Many ISPs currently don't even provide it at all. Can you name 1 resource that requires you to use IPv6? If you do not have a pressing need for IPv6 - then you can put off climbing up the learning curve hill for a later date.. You have YEARS for sure ;)
-
I try to keep my computers patched and secure, but as you know, you can never be 100% sure that one of your computers has been compromised. So IMHO it is not wise to trust your own systems.
So, I try to do things to prevent "infected computers" to reach other computers. And the same rules would hopefully warm me that some thing strange is happening.
Capative portal does not help here, since that protect against unwanted computers, not against my own computers potentially being infected.
And of cause as I am talking about MAC-filtering, I am talking about traffic originated from my own vlan's
-
My remarks are related to multiple situations. Surely not only my guest lan!
I have multiple vlans and in each vlan I limmit the outgoing traffic, traffic to other vlans and/or the internet as far as possible.
Extreme example is e.g. the greenzone (e.g. my nas) which should be kept away from the internet as far as possible. Among other things I use floating rules to make sure that (nearly) every other vlan can not enter that vlan.
-
I know, mac filtering is (when supported) only possible for network internal generated traffic. And that is exactly what I had in mind