Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Suricata on pfSense 3 starts and kills the WAN

    Scheduled Pinned Locked Moved IDS/IPS
    32 Posts 7 Posters 8.4k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • T
      teknologist
      last edited by

      Hello everyone,

      Suricata both in legacy and ips mode on pfsense 2.3, as soon as it starts, a few seconds later, WAN address (obtained via DHCP) is killed and these messages appear in kernel log:

      arpresolve: can't allocate llinfo for XXX.XXX.XXX.XXX on em3

      and wan only comes back as soon as we stop suricata.

      Any clues ?

      We use em driver with intel GB Pro interfaces.

      If we use snort everything works fine.

      Many thanks in advance…

      PS:  By the way this happens even with no rules at all...

      1 Reply Last reply Reply Quote 0
      • bmeeksB
        bmeeks
        last edited by

        Check and make sure you don't somehow have a duplicate or zombie Suricata process.  Run this command from the shell:

        
ps -aux |grep suricata

        You should see only a single Suricata instance per configured interface.  You can look at the entire command line of the listed processes to see how they match up.  If any one is an exact duplicate of another, then kill both of those matching processes and start Suricata again.

        Bill

        1 Reply Last reply Reply Quote 0
        • T
          teknologist
          last edited by

          Thanks for the answer Bill.

          Well i can confirm this happens even after a reboot.

          One process only, as soon as I start suricata, wan goes down and message about ARP prints in the log

          Thanks again,

          Eric

          1 Reply Last reply Reply Quote 0
          • bmeeksB
            bmeeks
            last edited by

            Have you looked at the posts on Google for your exact error message?  I found quite a few links to posts on other sites where FreeBSD (and even pfSense users) have reported a similar problem in the past.  At least of the posts I read traced the problem to their upstream modem.  Don't know if that is your case or not, but try chasing your ARP error on Google a bit.  Google also found some old threads here on the pfSense forum from 2013 about similar error messages.

            Also, please post your Suricata log.  You view it on the LOGS VIEW tab.  Select your WAN interface and then suricata.log file.  Copy and then paste the contents into a formatted block here.

            Bill

            1 Reply Last reply Reply Quote 0
            • T
              teknologist
              last edited by

              Hi Bill,

              Thanks again for your help.

              Of course I did google and cam across all the posts/subjects you mention but none fit my problem…

              The arp message only happens just after suricata starts.

              I have been running this pfsense box for years with no issues using snort.

              no arp messages, nothing.

              I will continue to investigate. AS far as I can tell the surricata.log does not show anything wrong.

              I will post it here as soon as possible.

              Cheers,

              Eric

              PS: no cable modem or  ADSL router here. I use FTTH.

              1 Reply Last reply Reply Quote 0
              • T
                teknologist
                last edited by

                Just after hitting start on suricata:

                Kernel Log:

                
832.776863 [1233] netmap_mem_global_config  reconfiguring
em3: link state changed to DOWN
em3_vlan100: link state changed to DOWN
em3: link state changed to UP
em3_vlan100: link state changed to UP

                And suricata.log:

                22/4/2016 -- 12:10:32 - <notice>-- This is Suricata version 3.0 RELEASE
22/4/2016 -- 12:10:32 - <info>-- CPUs/cores online: 4
22/4/2016 -- 12:10:32 - <info>-- Adding interface em3 from config file
22/4/2016 -- 12:10:32 - <info>-- Adding interface em3+ from config file
22/4/2016 -- 12:10:32 - <info>-- Netmap: Setting IPS mode
22/4/2016 -- 12:10:32 - <info>-- 'default' server has 'request-body-minimal-inspect-size' set to 33882 and 'request-body-inspect-window' set to 4053 after randomization.
22/4/2016 -- 12:10:32 - <info>-- 'default' server has 'response-body-minimal-inspect-size' set to 33695 and 'response-body-inspect-window' set to 4218 after randomization.
22/4/2016 -- 12:10:32 - <info>-- HTTP memcap: 67108864
22/4/2016 -- 12:10:32 - <info>-- DNS request flood protection level: 500
22/4/2016 -- 12:10:32 - <info>-- DNS per flow memcap (state-memcap): 524288
22/4/2016 -- 12:10:32 - <info>-- DNS global memcap: 16777216
22/4/2016 -- 12:10:32 - <info>-- allocated 1572864 bytes of memory for the defrag hash... 65536 buckets of size 24
22/4/2016 -- 12:10:32 - <info>-- preallocated 65535 defrag trackers of size 136
22/4/2016 -- 12:10:32 - <info>-- defrag memory usage: 10485624 bytes, maximum: 33554432
22/4/2016 -- 12:10:32 - <info>-- AutoFP mode using "Active Packets" flow load balancer
22/4/2016 -- 12:10:32 - <info>-- allocated 262144 bytes of memory for the host hash... 4096 buckets of size 64
22/4/2016 -- 12:10:32 - <info>-- preallocated 1000 hosts of size 104
22/4/2016 -- 12:10:32 - <info>-- host memory usage: 366144 bytes, maximum: 16777216
22/4/2016 -- 12:10:32 - <info>-- allocated 4194304 bytes of memory for the flow hash... 65536 buckets of size 64
22/4/2016 -- 12:10:32 - <info>-- preallocated 10000 flows of size 256
22/4/2016 -- 12:10:32 - <info>-- flow memory usage: 6754304 bytes, maximum: 33554432
22/4/2016 -- 12:10:32 - <info>-- stream "prealloc-sessions": 32768 (per thread)
22/4/2016 -- 12:10:32 - <info>-- stream "memcap": 67108864
22/4/2016 -- 12:10:32 - <info>-- stream "midstream" session pickups: disabled
22/4/2016 -- 12:10:32 - <info>-- stream "async-oneside": disabled
22/4/2016 -- 12:10:32 - <info>-- stream "checksum-validation": disabled
22/4/2016 -- 12:10:32 - <info>-- stream."inline": enabled
22/4/2016 -- 12:10:32 - <info>-- stream "max-synack-queued": 5
22/4/2016 -- 12:10:32 - <info>-- stream.reassembly "memcap": 67108864
22/4/2016 -- 12:10:32 - <info>-- stream.reassembly "depth": 0
22/4/2016 -- 12:10:32 - <info>-- stream.reassembly "toserver-chunk-size": 2654
22/4/2016 -- 12:10:32 - <info>-- stream.reassembly "toclient-chunk-size": 2436
22/4/2016 -- 12:10:32 - <info>-- stream.reassembly.raw: enabled
22/4/2016 -- 12:10:32 - <info>-- segment pool: pktsize 4, prealloc 256
22/4/2016 -- 12:10:32 - <info>-- segment pool: pktsize 16, prealloc 512
22/4/2016 -- 12:10:32 - <info>-- segment pool: pktsize 112, prealloc 512
22/4/2016 -- 12:10:32 - <info>-- segment pool: pktsize 248, prealloc 512
22/4/2016 -- 12:10:32 - <info>-- segment pool: pktsize 512, prealloc 512
22/4/2016 -- 12:10:32 - <info>-- segment pool: pktsize 768, prealloc 1024
22/4/2016 -- 12:10:32 - <info>-- segment pool: pktsize 1448, prealloc 1024
22/4/2016 -- 12:10:32 - <info>-- segment pool: pktsize 65535, prealloc 128
22/4/2016 -- 12:10:32 - <info>-- stream.reassembly "chunk-prealloc": 250
22/4/2016 -- 12:10:32 - <info>-- stream.reassembly "zero-copy-size": 128
22/4/2016 -- 12:10:32 - <info>-- allocated 262144 bytes of memory for the ippair hash... 4096 buckets of size 64
22/4/2016 -- 12:10:32 - <info>-- preallocated 1000 ippairs of size 104
22/4/2016 -- 12:10:32 - <info>-- ippair memory usage: 366144 bytes, maximum: 16777216
22/4/2016 -- 12:10:32 - <info>-- using magic-file /usr/share/misc/magic
22/4/2016 -- 12:10:32 - <info>-- Delayed detect disabled
22/4/2016 -- 12:10:32 - <info>-- IP reputation disabled
22/4/2016 -- 12:10:32 - <info>-- Loading rule file: /usr/local/etc/suricata/suricata_42461_em3/rules/suricata.rules
22/4/2016 -- 12:10:32 - <info>-- 1 rule files processed. 171 rules successfully loaded, 0 rules failed
22/4/2016 -- 12:10:32 - <info>-- 171 signatures processed. 0 are IP-only rules, 0 are inspecting packet payload, 43 inspect application layer, 76 are decoder event only
22/4/2016 -- 12:10:32 - <info>-- building signature grouping structure, stage 1: preprocessing rules... complete
22/4/2016 -- 12:10:32 - <info>-- building signature grouping structure, stage 2: building source address list... complete
22/4/2016 -- 12:10:32 - <info>-- building signature grouping structure, stage 3: building destination address lists... complete
22/4/2016 -- 12:10:32 - <info>-- Threshold config parsed: 0 rule(s) found
22/4/2016 -- 12:10:32 - <info>-- Core dump size is unlimited.
22/4/2016 -- 12:10:32 - <info>-- fast output device (regular) initialized: alerts.log
22/4/2016 -- 12:10:32 - <info>-- Unified2-alert initialized: filename unified2.alert, limit 32 MB
22/4/2016 -- 12:10:32 - <info>-- http-log output device (regular) initialized: http.log
22/4/2016 -- 12:10:32 - <info>-- Syslog output initialized
22/4/2016 -- 12:10:32 - <info>-- Using 2 live device(s).
22/4/2016 -- 12:10:32 - <info>-- Using 1 threads for interface em3
22/4/2016 -- 12:10:32 - <info>-- Netmap IPS mode activated em3->em3+
22/4/2016 -- 12:10:32 - <info>-- preallocated 1024 packets. Total memory 3557376
22/4/2016 -- 12:10:33 - <info>-- Using 1 threads for interface em3+
22/4/2016 -- 12:10:33 - <info>-- Netmap IPS mode activated em3+->em3
22/4/2016 -- 12:10:33 - <info>-- preallocated 1024 packets. Total memory 3557376
22/4/2016 -- 12:10:33 - <info>-- RunModeIdsNetmapAutoFp initialised
22/4/2016 -- 12:10:33 - <info>-- using 1 flow manager threads
22/4/2016 -- 12:10:33 - <info>-- preallocated 1024 packets. Total memory 3557376
22/4/2016 -- 12:10:33 - <info>-- using 1 flow recycler threads
22/4/2016 -- 12:10:33 - <notice>-- all 8 packet processing threads, 2 management threads initialized, engine started.

WAN is down SO I stop suricata here...

22/4/2016 -- 12:12:17 - <notice>-- Signal Received.  Stopping engine.
22/4/2016 -- 12:12:17 - <info>-- 0 new flows, 0 established flows were timed out, 0 flows in closed state
22/4/2016 -- 12:12:17 - <info>-- preallocated 1024 packets. Total memory 3557376
22/4/2016 -- 12:12:17 - <info>-- time elapsed 105.125s
22/4/2016 -- 12:12:17 - <info>-- 29 flows processed
22/4/2016 -- 12:12:17 - <info>-- (RxNetmapem31) Kernel: Packets 626, dropped 0, bytes 72768
22/4/2016 -- 12:12:17 - <info>-- AutoFP - Total flow handler queues - 6
22/4/2016 -- 12:12:17 - <info>-- AutoFP - Queue 0  - pkts: 105          flows: 0           
22/4/2016 -- 12:12:17 - <info>-- AutoFP - Queue 1  - pkts: 105          flows: 0           
22/4/2016 -- 12:12:17 - <info>-- AutoFP - Queue 2  - pkts: 104          flows: 0           
22/4/2016 -- 12:12:17 - <info>-- AutoFP - Queue 3  - pkts: 104          flows: 0           
22/4/2016 -- 12:12:17 - <info>-- AutoFP - Queue 4  - pkts: 104          flows: 0           
22/4/2016 -- 12:12:17 - <info>-- AutoFP - Queue 5  - pkts: 104          flows: 0           
22/4/2016 -- 12:12:17 - <info>-- (RxNetmapem3+1) Kernel: Packets 72, dropped 0, bytes 12011
22/4/2016 -- 12:12:17 - <info>-- AutoFP - Total flow handler queues - 6
22/4/2016 -- 12:12:17 - <info>-- AutoFP - Queue 0  - pkts: 54           flows: 26          
22/4/2016 -- 12:12:17 - <info>-- AutoFP - Queue 1  - pkts: 11           flows: 3           
22/4/2016 -- 12:12:17 - <info>-- AutoFP - Queue 2  - pkts: 2            flows: 0           
22/4/2016 -- 12:12:17 - <info>-- AutoFP - Queue 3  - pkts: 2            flows: 0           
22/4/2016 -- 12:12:17 - <info>-- AutoFP - Queue 4  - pkts: 2            flows: 0           
22/4/2016 -- 12:12:17 - <info>-- AutoFP - Queue 5  - pkts: 1            flows: 0           
22/4/2016 -- 12:12:17 - <info>-- Stream TCP processed 28 TCP packets
22/4/2016 -- 12:12:17 - <info>-- Fast log output wrote 0 alerts
22/4/2016 -- 12:12:17 - <info>-- (Detect1) Alerts 0
22/4/2016 -- 12:12:17 - <info>-- Alert unified2 module wrote 0 alerts
22/4/2016 -- 12:12:17 - <info>-- HTTP logger logged 0 requests
22/4/2016 -- 12:12:17 - <info>-- Stream TCP processed 1 TCP packets
22/4/2016 -- 12:12:17 - <info>-- Fast log output wrote 0 alerts
22/4/2016 -- 12:12:17 - <info>-- (Detect2) Alerts 0
22/4/2016 -- 12:12:17 - <info>-- HTTP logger logged 0 requests
22/4/2016 -- 12:12:17 - <info>-- Stream TCP processed 0 TCP packets
22/4/2016 -- 12:12:17 - <info>-- Fast log output wrote 0 alerts
22/4/2016 -- 12:12:17 - <info>-- (Detect3) Alerts 0
22/4/2016 -- 12:12:17 - <info>-- HTTP logger logged 0 requests
22/4/2016 -- 12:12:17 - <info>-- Stream TCP processed 0 TCP packets
22/4/2016 -- 12:12:17 - <info>-- Fast log output wrote 0 alerts
22/4/2016 -- 12:12:17 - <info>-- (Detect4) Alerts 0
22/4/2016 -- 12:12:17 - <info>-- HTTP logger logged 0 requests
22/4/2016 -- 12:12:17 - <info>-- Stream TCP processed 0 TCP packets
22/4/2016 -- 12:12:17 - <info>-- Fast log output wrote 0 alerts
22/4/2016 -- 12:12:17 - <info>-- (Detect5) Alerts 0
22/4/2016 -- 12:12:17 - <info>-- HTTP logger logged 0 requests
22/4/2016 -- 12:12:17 - <info>-- Stream TCP processed 0 TCP packets
22/4/2016 -- 12:12:17 - <info>-- Fast log output wrote 0 alerts
22/4/2016 -- 12:12:17 - <info>-- (Detect6) Alerts 0
22/4/2016 -- 12:12:17 - <info>-- HTTP logger logged 0 requests
22/4/2016 -- 12:12:17 - <info>-- ippair memory usage: 366144 bytes, maximum: 16777216
22/4/2016 -- 12:12:18 - <info>-- host memory usage: 366144 bytes, maximum: 16777216
22/4/2016 -- 12:12:18 - <info>-- cleaning up signature grouping structure... complete
22/4/2016 -- 12:12:18 - <notice>-- Stats for 'em3':  pkts: 626, drop: 0 (0.00%), invalid chksum: 0
22/4/2016 -- 12:12:18 - <notice>-- Stats for 'em3+':  pkts: 72, drop: 0 (0.00%), invalid chksum: 0</notice></notice></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></notice></notice></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></notice>

                I cannot see anything weird here…can you ? And this time the arp message did not even show up...

                Cheers,

                Eric

                1 Reply Last reply Reply Quote 0
                • bmeeksB
                  bmeeks
                  last edited by

                  @teknologist:

                  Just after hitting start on suricata:

                  Kernel Log:

                  
832.776863 [1233] netmap_mem_global_config  reconfiguring
em3: link state changed to DOWN
em3_vlan100: link state changed to DOWN
em3: link state changed to UP
em3_vlan100: link state changed to UP

                  And suricata.log:

                  22/4/2016 -- 12:10:32 - <notice>-- This is Suricata version 3.0 RELEASE
22/4/2016 -- 12:10:32 - <info>-- CPUs/cores online: 4
22/4/2016 -- 12:10:32 - <info>-- Adding interface em3 from config file
22/4/2016 -- 12:10:32 - <info>-- Adding interface em3+ from config file
22/4/2016 -- 12:10:32 - <info>-- Netmap: Setting IPS mode
22/4/2016 -- 12:10:32 - <info>-- 'default' server has 'request-body-minimal-inspect-size' set to 33882 and 'request-body-inspect-window' set to 4053 after randomization.
22/4/2016 -- 12:10:32 - <info>-- 'default' server has 'response-body-minimal-inspect-size' set to 33695 and 'response-body-inspect-window' set to 4218 after randomization.
22/4/2016 -- 12:10:32 - <info>-- HTTP memcap: 67108864
22/4/2016 -- 12:10:32 - <info>-- DNS request flood protection level: 500
22/4/2016 -- 12:10:32 - <info>-- DNS per flow memcap (state-memcap): 524288
22/4/2016 -- 12:10:32 - <info>-- DNS global memcap: 16777216
22/4/2016 -- 12:10:32 - <info>-- allocated 1572864 bytes of memory for the defrag hash... 65536 buckets of size 24
22/4/2016 -- 12:10:32 - <info>-- preallocated 65535 defrag trackers of size 136
22/4/2016 -- 12:10:32 - <info>-- defrag memory usage: 10485624 bytes, maximum: 33554432
22/4/2016 -- 12:10:32 - <info>-- AutoFP mode using "Active Packets" flow load balancer
22/4/2016 -- 12:10:32 - <info>-- allocated 262144 bytes of memory for the host hash... 4096 buckets of size 64
22/4/2016 -- 12:10:32 - <info>-- preallocated 1000 hosts of size 104
22/4/2016 -- 12:10:32 - <info>-- host memory usage: 366144 bytes, maximum: 16777216
22/4/2016 -- 12:10:32 - <info>-- allocated 4194304 bytes of memory for the flow hash... 65536 buckets of size 64
22/4/2016 -- 12:10:32 - <info>-- preallocated 10000 flows of size 256
22/4/2016 -- 12:10:32 - <info>-- flow memory usage: 6754304 bytes, maximum: 33554432
22/4/2016 -- 12:10:32 - <info>-- stream "prealloc-sessions": 32768 (per thread)
22/4/2016 -- 12:10:32 - <info>-- stream "memcap": 67108864
22/4/2016 -- 12:10:32 - <info>-- stream "midstream" session pickups: disabled
22/4/2016 -- 12:10:32 - <info>-- stream "async-oneside": disabled
22/4/2016 -- 12:10:32 - <info>-- stream "checksum-validation": disabled
22/4/2016 -- 12:10:32 - <info>-- stream."inline": enabled
22/4/2016 -- 12:10:32 - <info>-- stream "max-synack-queued": 5
22/4/2016 -- 12:10:32 - <info>-- stream.reassembly "memcap": 67108864
22/4/2016 -- 12:10:32 - <info>-- stream.reassembly "depth": 0
22/4/2016 -- 12:10:32 - <info>-- stream.reassembly "toserver-chunk-size": 2654
22/4/2016 -- 12:10:32 - <info>-- stream.reassembly "toclient-chunk-size": 2436
22/4/2016 -- 12:10:32 - <info>-- stream.reassembly.raw: enabled
22/4/2016 -- 12:10:32 - <info>-- segment pool: pktsize 4, prealloc 256
22/4/2016 -- 12:10:32 - <info>-- segment pool: pktsize 16, prealloc 512
22/4/2016 -- 12:10:32 - <info>-- segment pool: pktsize 112, prealloc 512
22/4/2016 -- 12:10:32 - <info>-- segment pool: pktsize 248, prealloc 512
22/4/2016 -- 12:10:32 - <info>-- segment pool: pktsize 512, prealloc 512
22/4/2016 -- 12:10:32 - <info>-- segment pool: pktsize 768, prealloc 1024
22/4/2016 -- 12:10:32 - <info>-- segment pool: pktsize 1448, prealloc 1024
22/4/2016 -- 12:10:32 - <info>-- segment pool: pktsize 65535, prealloc 128
22/4/2016 -- 12:10:32 - <info>-- stream.reassembly "chunk-prealloc": 250
22/4/2016 -- 12:10:32 - <info>-- stream.reassembly "zero-copy-size": 128
22/4/2016 -- 12:10:32 - <info>-- allocated 262144 bytes of memory for the ippair hash... 4096 buckets of size 64
22/4/2016 -- 12:10:32 - <info>-- preallocated 1000 ippairs of size 104
22/4/2016 -- 12:10:32 - <info>-- ippair memory usage: 366144 bytes, maximum: 16777216
22/4/2016 -- 12:10:32 - <info>-- using magic-file /usr/share/misc/magic
22/4/2016 -- 12:10:32 - <info>-- Delayed detect disabled
22/4/2016 -- 12:10:32 - <info>-- IP reputation disabled
22/4/2016 -- 12:10:32 - <info>-- Loading rule file: /usr/local/etc/suricata/suricata_42461_em3/rules/suricata.rules
22/4/2016 -- 12:10:32 - <info>-- 1 rule files processed. 171 rules successfully loaded, 0 rules failed
22/4/2016 -- 12:10:32 - <info>-- 171 signatures processed. 0 are IP-only rules, 0 are inspecting packet payload, 43 inspect application layer, 76 are decoder event only
22/4/2016 -- 12:10:32 - <info>-- building signature grouping structure, stage 1: preprocessing rules... complete
22/4/2016 -- 12:10:32 - <info>-- building signature grouping structure, stage 2: building source address list... complete
22/4/2016 -- 12:10:32 - <info>-- building signature grouping structure, stage 3: building destination address lists... complete
22/4/2016 -- 12:10:32 - <info>-- Threshold config parsed: 0 rule(s) found
22/4/2016 -- 12:10:32 - <info>-- Core dump size is unlimited.
22/4/2016 -- 12:10:32 - <info>-- fast output device (regular) initialized: alerts.log
22/4/2016 -- 12:10:32 - <info>-- Unified2-alert initialized: filename unified2.alert, limit 32 MB
22/4/2016 -- 12:10:32 - <info>-- http-log output device (regular) initialized: http.log
22/4/2016 -- 12:10:32 - <info>-- Syslog output initialized
22/4/2016 -- 12:10:32 - <info>-- Using 2 live device(s).
22/4/2016 -- 12:10:32 - <info>-- Using 1 threads for interface em3
22/4/2016 -- 12:10:32 - <info>-- Netmap IPS mode activated em3->em3+
22/4/2016 -- 12:10:32 - <info>-- preallocated 1024 packets. Total memory 3557376
22/4/2016 -- 12:10:33 - <info>-- Using 1 threads for interface em3+
22/4/2016 -- 12:10:33 - <info>-- Netmap IPS mode activated em3+->em3
22/4/2016 -- 12:10:33 - <info>-- preallocated 1024 packets. Total memory 3557376
22/4/2016 -- 12:10:33 - <info>-- RunModeIdsNetmapAutoFp initialised
22/4/2016 -- 12:10:33 - <info>-- using 1 flow manager threads
22/4/2016 -- 12:10:33 - <info>-- preallocated 1024 packets. Total memory 3557376
22/4/2016 -- 12:10:33 - <info>-- using 1 flow recycler threads
22/4/2016 -- 12:10:33 - <notice>-- all 8 packet processing threads, 2 management threads initialized, engine started.

WAN is down SO I stop suricata here...

22/4/2016 -- 12:12:17 - <notice>-- Signal Received.  Stopping engine.
22/4/2016 -- 12:12:17 - <info>-- 0 new flows, 0 established flows were timed out, 0 flows in closed state
22/4/2016 -- 12:12:17 - <info>-- preallocated 1024 packets. Total memory 3557376
22/4/2016 -- 12:12:17 - <info>-- time elapsed 105.125s
22/4/2016 -- 12:12:17 - <info>-- 29 flows processed
22/4/2016 -- 12:12:17 - <info>-- (RxNetmapem31) Kernel: Packets 626, dropped 0, bytes 72768
22/4/2016 -- 12:12:17 - <info>-- AutoFP - Total flow handler queues - 6
22/4/2016 -- 12:12:17 - <info>-- AutoFP - Queue 0  - pkts: 105          flows: 0           
22/4/2016 -- 12:12:17 - <info>-- AutoFP - Queue 1  - pkts: 105          flows: 0           
22/4/2016 -- 12:12:17 - <info>-- AutoFP - Queue 2  - pkts: 104          flows: 0           
22/4/2016 -- 12:12:17 - <info>-- AutoFP - Queue 3  - pkts: 104          flows: 0           
22/4/2016 -- 12:12:17 - <info>-- AutoFP - Queue 4  - pkts: 104          flows: 0           
22/4/2016 -- 12:12:17 - <info>-- AutoFP - Queue 5  - pkts: 104          flows: 0           
22/4/2016 -- 12:12:17 - <info>-- (RxNetmapem3+1) Kernel: Packets 72, dropped 0, bytes 12011
22/4/2016 -- 12:12:17 - <info>-- AutoFP - Total flow handler queues - 6
22/4/2016 -- 12:12:17 - <info>-- AutoFP - Queue 0  - pkts: 54           flows: 26          
22/4/2016 -- 12:12:17 - <info>-- AutoFP - Queue 1  - pkts: 11           flows: 3           
22/4/2016 -- 12:12:17 - <info>-- AutoFP - Queue 2  - pkts: 2            flows: 0           
22/4/2016 -- 12:12:17 - <info>-- AutoFP - Queue 3  - pkts: 2            flows: 0           
22/4/2016 -- 12:12:17 - <info>-- AutoFP - Queue 4  - pkts: 2            flows: 0           
22/4/2016 -- 12:12:17 - <info>-- AutoFP - Queue 5  - pkts: 1            flows: 0           
22/4/2016 -- 12:12:17 - <info>-- Stream TCP processed 28 TCP packets
22/4/2016 -- 12:12:17 - <info>-- Fast log output wrote 0 alerts
22/4/2016 -- 12:12:17 - <info>-- (Detect1) Alerts 0
22/4/2016 -- 12:12:17 - <info>-- Alert unified2 module wrote 0 alerts
22/4/2016 -- 12:12:17 - <info>-- HTTP logger logged 0 requests
22/4/2016 -- 12:12:17 - <info>-- Stream TCP processed 1 TCP packets
22/4/2016 -- 12:12:17 - <info>-- Fast log output wrote 0 alerts
22/4/2016 -- 12:12:17 - <info>-- (Detect2) Alerts 0
22/4/2016 -- 12:12:17 - <info>-- HTTP logger logged 0 requests
22/4/2016 -- 12:12:17 - <info>-- Stream TCP processed 0 TCP packets
22/4/2016 -- 12:12:17 - <info>-- Fast log output wrote 0 alerts
22/4/2016 -- 12:12:17 - <info>-- (Detect3) Alerts 0
22/4/2016 -- 12:12:17 - <info>-- HTTP logger logged 0 requests
22/4/2016 -- 12:12:17 - <info>-- Stream TCP processed 0 TCP packets
22/4/2016 -- 12:12:17 - <info>-- Fast log output wrote 0 alerts
22/4/2016 -- 12:12:17 - <info>-- (Detect4) Alerts 0
22/4/2016 -- 12:12:17 - <info>-- HTTP logger logged 0 requests
22/4/2016 -- 12:12:17 - <info>-- Stream TCP processed 0 TCP packets
22/4/2016 -- 12:12:17 - <info>-- Fast log output wrote 0 alerts
22/4/2016 -- 12:12:17 - <info>-- (Detect5) Alerts 0
22/4/2016 -- 12:12:17 - <info>-- HTTP logger logged 0 requests
22/4/2016 -- 12:12:17 - <info>-- Stream TCP processed 0 TCP packets
22/4/2016 -- 12:12:17 - <info>-- Fast log output wrote 0 alerts
22/4/2016 -- 12:12:17 - <info>-- (Detect6) Alerts 0
22/4/2016 -- 12:12:17 - <info>-- HTTP logger logged 0 requests
22/4/2016 -- 12:12:17 - <info>-- ippair memory usage: 366144 bytes, maximum: 16777216
22/4/2016 -- 12:12:18 - <info>-- host memory usage: 366144 bytes, maximum: 16777216
22/4/2016 -- 12:12:18 - <info>-- cleaning up signature grouping structure... complete
22/4/2016 -- 12:12:18 - <notice>-- Stats for 'em3':  pkts: 626, drop: 0 (0.00%), invalid chksum: 0
22/4/2016 -- 12:12:18 - <notice>-- Stats for 'em3+':  pkts: 72, drop: 0 (0.00%), invalid chksum: 0</notice></notice></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></notice></notice></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></info></notice>

                  I cannot see anything weird here…can you ? And this time the arp message did not even show up...

                  Cheers,

                  Eric

                  Nope, I do not see anything unusual in the log.  And you said the same thing happens in Legacy Mode as well?  Legacy Mode in Suricata is just like Snort.  Both use the libpcap library to grab copies of packets flowing through the interface.  With inline mode I could sort of speculate that the new Netmap interface could be  a potential problem spot, but the old legacy mode should not be interfering.

                  For the kernel log messages, what sort order do you have on the system log?  I'm trying to figure out which message happened first.  Was it the n_etmap_mem_global_ one or the em3_vlan100 link state one?

                  I assume since this box is misbehaving so badly that it is not in service, so would you be game for installing the Snort package on it to see if Snort still works OK?

                  This is a very baffling problem.

                  Bill

                  1 Reply Last reply Reply Quote 0
                  • T
                    teknologist
                    last edited by

                    Hi Bill,

                    I am currently running Snort. I have turned of suricata for the moment.

                    pfSense gets the WAN IP through a DHCP request to the FTTH "modem"

                    I don't understand what you mean by sort order ?

                    The kernel messages are shown with dmesg.

                    I see the netmap first and then WAN interfaces goes DOWN/UP (as well as the WAN-vlan100 of course)

                    In fact it always happens the same way:

                    Everything is up except suricata.

                    I start suricata, wait for a few seconds and see those messages in dmesg.
                    And I see my WAN connection killed…

                    At very first i thought it had something to do with a rule, but even with no rule and no BLOCKING it happens.

                    Then I disable suricata on WAN, enable snort on WAN and everything goes back to normal...

                    This is driving me crazy...I usually always find my answers through forums/google....this time not..; :-(

                    1 Reply Last reply Reply Quote 0
                    • bmeeksB
                      bmeeks
                      last edited by

                      I thought you had copied some messages out of the system log from the GUI.  There is a setting for the GUI display of the system log to sort events either most recent at the top or oldest at the top.  That's the setting I was referring to.

                      I suspect Netmap might be the culprit here.  If you want to test some more, do this –

                      1. Install Suricata.  Go to the INTERFACE SETTINGS tab for the WAN in Suricata and change the blocking mode to Legacy Mode and save the change.  Now immediately go back and disable blocking for the WAN.  Save that change.  Now start/restart Suricata and see what happens.

                      Maybe you have already done this, but the sequence of steps above should result in the Netmap module not loading in Suricata.

                      Bill

                      1 Reply Last reply Reply Quote 0
                      • T
                        teknologist
                        last edited by

                        You are right, doing it this way it works.

                        An,ything I can do to make it work inline ?

                        1 Reply Last reply Reply Quote 0
                        • T
                          teknologist
                          last edited by

                          Tried re-enabling inline mode. No go.

                          I tend to have the feeling that suricata is just blocking WAN DHCP request…

                          I don't see any kernel errors anymore...

                          1 Reply Last reply Reply Quote 0
                          • bmeeksB
                            bmeeks
                            last edited by

                            @teknologist:

                            Tried re-enabling inline mode. No go.

                            I tend to have the feeling that suricata is just blocking WAN DHCP request…

                            I don't see any kernel errors anymore...

                            I think there are some issues with Netmap (the new technology used for inline mode).  Some other users are having issues with certain NICs even with Suricata not installed.  One user also uncovered some bug reports to the Netmap developer on Github, so I'm thinking Netmap itself is the issue.  When it malfunctions, because of where it lies in the packet chain, it can kill connectivity dead.  pfSense 2.3 has Netmap compiled in by default now (this is new, the 2.2.x line did not use Netmap).  So we may be seeing some growing pains from the new technology.

                            You may be stuck with using Legacy Mode blocking for the near term while any potential Netmap bugs are sorted out.

                            Bill

                            1 Reply Last reply Reply Quote 0
                            • T
                              teknologist
                              last edited by

                              Hi Bill,

                              Makes sense. Anyways, I am going back to Snort which has been working well for years now.
                              I just wanted to see where things were evolving… ;-)

                              Again, thanks for your help and reactivity!

                              Cheers,

                              Eric

                              1 Reply Last reply Reply Quote 0
                              • bmeeksB
                                bmeeks
                                last edited by

                                Snort does not currently use Netmap, and the fact it works but Suricata does not with inline mode (which does use Netmap) seems to me at least to point the finger at Netmap itself.

                                I'm sure this will get fixed.  Netmap has great promise for providing really high performance operations for packet inspection and forwarding.  The pfSense team will likely be working with the FreeBSD folks to get this figured out and fixed.

                                Bill

                                1 Reply Last reply Reply Quote 0
                                • T
                                  teknologist
                                  last edited by

                                  That is fantastic news. I would certainly benefit from highspeed as right now I am on 1Gbps FFTH and snort caps me to 350Mbps… ;-)

                                  i'll definitely keep an eye on it.

                                  Keep up the great work!

                                  1 Reply Last reply Reply Quote 0
                                  • P
                                    pouzar
                                    last edited by

                                    Hello,

                                    I read your discussion about wan kill connection problem / Suricata inline mode. I have the same problem and cannot reach solution.
                                    Have you found any solution? I would like to use inline mode (legacy mode working OK). Propably is problem in netmap HW.  Same configuraction, but in vmware host is working well.

                                    Thank you

                                    Martin Pouzar

                                    1 Reply Last reply Reply Quote 0
                                    • W
                                      Wisiwyg
                                      last edited by

                                      @bmeeks:

                                      Snort does not currently use Netmap, and the fact it works but Suricata does not with inline mode (which does use Netmap) seems to me at least to point the finger at Netmap itself.

                                      I'm sure this will get fixed.  Netmap has great promise for providing really high performance operations for packet inspection and forwarding.  The pfSense team will likely be working with the FreeBSD folks to get this figured out and fixed.

                                      Bill

                                      Any progress on the netmap update? How would we know of a resolution other than the system pulling an updated file? TIA!

                                      Overkill - i5 quad, 3.1ghz, 8gb, 240gb SSD, dual & single Intel NICs

                                      1 Reply Last reply Reply Quote 0
                                      • bmeeksB
                                        bmeeks
                                        last edited by

                                        @Wisiwyg:

                                        @bmeeks:

                                        Snort does not currently use Netmap, and the fact it works but Suricata does not with inline mode (which does use Netmap) seems to me at least to point the finger at Netmap itself.

                                        I'm sure this will get fixed.  Netmap has great promise for providing really high performance operations for packet inspection and forwarding.  The pfSense team will likely be working with the FreeBSD folks to get this figured out and fixed.

                                        Bill

                                        Any progress on the netmap update? How would we know of a resolution other than the system pulling an updated file? TIA!

                                        You will need to follow the bug reports on Redmine.  I am not a kernel developer and thus am not working on the Netmap problem.  That will be up to the pfSense developers and/or the FreeBSD folks.  From what I can tell looking at the various issues mentioned here on the forums, there are issues with Netmap and with IPSEC traffic on some NIC drivers.

                                        I suspect for sure nothing would be fixed with Netmpa until at least the 2.3.1 version of pfSense goes to release.

                                        Bill

                                        1 Reply Last reply Reply Quote 0
                                        • W
                                          Wisiwyg
                                          last edited by

                                          2.3.1 Release out today…

                                          I've loaded it up to see if it corrects things.

                                          Overkill - i5 quad, 3.1ghz, 8gb, 240gb SSD, dual & single Intel NICs

                                          1 Reply Last reply Reply Quote 0
                                          • T
                                            teknologist
                                            last edited by

                                            @Wisiwyg:

                                            2.3.1 Release out today…

                                            I've loaded it up to see if it corrects things.

                                            Yes, and ?

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.