Guide to filtering web content (http and https) with pfsense 2.3
-
1.With squidguard set default access to allow then set the categories you want to deny. Save and then go to squidguard General settings and hit apply. Please read the tip under this section it is very important.
Read this https://doc.pfsense.org/index.php/SquidGuard_packageThat was the problem - there were no other categories than whitelist and default access. I managed to get the others by enabling "Blackilist" under the general settings of Squid Guard. Forgive me if I just missed it, but I couldn't see that step in the guide.
-
I added
In squidguard under General settings
Tic enable
Tic Enable log
Tic Enable log rotation
Tic enable blacklist
Under Blacklist URL add http://www.shallalist.de/Downloads/shallalist.tar.gz
Save
apply (you must always hit apply for any changes you made to squidguard). -
I found this post and I am researching to see how well it will work.
https://forum.pfsense.org/index.php?topic=106016.0
The idea is to use the wpad for https content and have a transperrent proxy for http traffic. This could remove the bypass rules for programs with no proxy settings and need to use port 80.
Update
OK it looks to be working fine, now all the traffic that was block on port 80 is now using the transperrent proxy, you will still need a pass rule for port 443 but not for port 80.So you can use the wpad for http and https filtering (or for just https) and enable the transperrent proxy to catch the leftovers.
-
Just to point out that this approach does not play well with many Roku channels - at least on my Roku 3 anyway.
Forcing youtube to be restricted causes all videos to fail on the Roku app.
The step " Do not allow IP-Addresses in URL" breaks Netflix.
There is also something that breaks the ITV Hub channel - although I haven't figured out what yet. My experiments suggest that it's something to do with Squid, but probably no squid guard.
The Roku remote is also somewhat less reliable in connecting after a reboot of the Roku, although I'm surprised at that, because I thought the Roku used it's own wifi to connect to the remote independently of the main network.
I'm not saying all this because I'm asking for fixes (although any suggestions that might provide fixes would be useful), but as information for anyone setting this up who has a Roku on their network.
I'm still, largely, using this approach, although, obviously, it's somewhat weaker than it would be if I didn't have to make compromises to get my Roku working.
-
Bypass the proxy for Roku and Netflix.
-
So i have got wpad all working fine using some other guides, everything goes via the autodisovery and all is good.
That is except android devices. They are not allowing auto wpad config, and i'm not setting them all up one by one.
If i set a firewall rule to block 80 - 443 on the LAN it works, and all the devices work except the android devices, which is what i expect to happen.
What i want to do is redirect all 80 - 443 requests to the squid port 3128.
But i have read somewhere that as my squid is the same ip as firewall and same subnet as lan it will cause some redirect loops.
Can someone advise me the best way to force all android traffic via squid without manually setting up each device..
-
That is except android devices. They are not allowing auto wpad config, and i'm not setting them all up one by one.
Manual setup is the only way I got it to work for android (5.1) and for older versions manual setup is the only option.
Try enabling transperrent proxy with the wpad, this will help with port 80 getting blocked.
But i have read somewhere that as my squid is the same ip as firewall and same subnet as lan it will cause some redirect loops.
I have read that too (never tried) might be your best option.
Or just get your users to setup the proxy?
-
But i have read somewhere that as my squid is the same ip as firewall and same subnet as lan it will cause some redirect loops.
You are not obliged to redirect to LAN IP. Thik about localhost ;) then I don't think there is any loop.
What makes this "dual proxy" option difficult is that, in order to set-up transparent proxy, you will have to allow requests ton internet on port 80, while, when configuring explicit proxy, you may (should) want to deny such access so that you ensure everything goes through your proxy.
And same for HTTPS except that transparent proxy, unless you configure ssl-bump, will not intercept HTTPS flow. -
Bypass the proxy for Roku and Netflix.
This fixes the issue with itv hub, although bypassing for netflix.co.uk - works on the roku, but then breaks netflix on Android - presumably they're using different destination ips.
Will have to re-enable ip addresses in the url in squid.
Also, this doesn't fix the problem with youtube - you just have to allow unsafe mode…
-
this guide was very nice, but it does not work for me.
http proxy part works fine (transparent mode)
on android using automatic discovery it uses the wpad file, and looking in the log I can see entries like:
10.111.11.111/android-a41b317d63f30562.local sb.scorecardresearch.com:443 Request(default/blk_BL_tracker/-) - CONNECT REDIRECT
which implies to me that https is working, but regular expression matching for a site only works if it is http, not over https, which means that filtering using regexp for youtube and google does not work.
no filtering on sites using https seems to be happening.safe search for youtube only works for desktop-pc, not on youtube apps. the desktop pc's say that safe search was forced by the network admin (which is what I want), but our android pads don't seem to care (rendering safe search totally useless)
I found this looking for a way to filter youtube and google, but since both sites use https it does not work, has anyone got it working or should I go to using certificates?
Regards
-
Just a note, you can simplify the directions by touching the file instead of creating with vi.
e.g.
Ssh into the router
type 8
cd /
cd var/unbound
vi forecegoogle.conf
leave blank for now
save (wq)Could be done with-
Ssh into the router
type 8
touch /var/unbound/forecegoogle.conf
Or you could just paste the touch command into diagnostics, command prompt and not shell in.
Just a suggestion, there are many ways to do these things. -
I have followed the guide, WPAD is working and the proxy is working in NON-transparent mode. I want to block specific subreddits, like Reddit.com/r/nsfw without blocking the remainder of Reddit.com. I do not want to block the entire domain, and I use pfblockerng and DNSBL with unbound to handle DNS and Top level domain blocking. I don't want to block all of Reddit… Just the NSFW material (and I have a list of all websites in squidguard).
At the moment, if the user access HTTP - Reddit.com/r/nsfw, then squidguard blocks at the proxy. However HTTPS requests to the same site are not blocked.
Is the proxy able to block this type of traffic without MITM / certificate installation on each host? At the moment, "transparent mode" and "MITM" are disabled on squid. Any advice is appreciated.
-
At the moment, if the user access HTTP - Reddit.com/r/nsfw, then squidguard blocks at the proxy. However HTTPS requests to the same site are not blocked.
Is the proxy able to block this type of traffic without MITM / certificate installation on each host? At the moment, "transparent mode" and "MITM" are disabled on squid. Any advice is appreciated.
No this will not work without MITM because CONNECT method on which Squidguard relies in order to block HTTPS knows only the left part of your URL, meaning here http://reddit.com
This part is sent in clear text but then everything else is within HTTPS tunnel thus this can't be read therefore blocked. -
Since that is literally the only site I'm trying to block on squid (and everything else is blocked using DNSBL / pfblockerng) how would you suggest I intercept HTTPS?
Do you think I could alter the WPAD rules to PROXY reddit.com and default to pass/DIRECT all other traffic? Then on squid, I enable MITM/SSL. I shouldn't use transparent mode, right, because WPAD would notify users of the proxy?
Would I use port 3128 or 3129 (I'm a little confused about the separate SSL port in the options).
Since this isn't a banking site or google site, any idea if I could configure squid such that no certs are needed on the host computers?
-
I can't really answer :-[
To me DNSBL doesn't aim at replacing HTTP filtering. These are on 2 different layers. If you implement DNSBL, then you will access less sites, that's it (and this is already not so bad) but HTTP proxy permits to filer at fqdn level (like DNSBL does) but also in URL (for HTTP or HTTPS is MITM) and, on top of that, to check for virus (again HTTP and also HTTPS if MITM)
Then decision to deploy proxy in transparent mode or not is entirely on your side. I'm definitely not prone to deploy transparent proxy but can understand that is some cases it may help.
-
Thanks. Yes - I use DNSBL just to block at the DNS level. pfblockerng has a new update where it also includes top level domains. It does a pretty good job of blocking content at the "domain-level" via DNS. I then set-up rules in pfsense to require the network to use pfsense's DNS unbound server. I agree these are two fundamentally different technologies. However, the DNS blacklist does not cover quite everything I intend to block. I want reddit.com to work, but want to block certain sub-reddits. Obviously, DNS is the wrong tool for this job, which brought me to squid.
I do not want to enable a transparent proxy. That seems overkill if I just want to block one site.
Does SSL filtering work in non-transparent mode?
I assume so. Is the port still 3128?
-
I do not want to enable a transparent proxy. That seems overkill if I just want to block one site.
Does SSL filtering work in non-transparent mode?
I assume so. Is the port still 3128?yes and yes.
And BTW you don"t need to edit proxy.pac in order to go direct for all sites but reddit.
You can still use proxy for all and only block reddit content.
Other HTTP sites will benefit from cache and all sites will potentially benefit from anti-virus if one day you enable it. -
Thanks. Right. My only thought there was:
I understand SSL decryption and inspection gets…. Nasty.
For example, if browsers require HSTS or whatever other protocols check certificates, then it might get annoying to keep installing certs on all on my computers on the LAN. For example... A small FTP server has no need to access Reddit, but I don't know if SSL bumping will cause issues with package updates in the future (without a cert).
Maybe it will... Maybe it won't. I don't know... Do you think it would potentially be an annoyance if I don't have certs installed?
-
Lots of good info! Thanks!!
Any clue as how to get android phones to be able to receive push notifications when using wifi via router connected to a pfsense box? I've enabled that particular vlans firewall to any any and the wan is any any as well. No filtering going on for that vlan via squid or squidguard. Cannot for the life of me understand what is blocking notifications. Very annoying.
-
Any clue as how to get android phones to be able to receive push notifications when using wifi via router connected to a pfsense box? I've enabled that particular vlans firewall to any any and the wan is any any as well. No filtering going on for that vlan via squid or squidguard. Cannot for the life of me understand what is blocking notifications. Very annoying.
What "notification" are you speaking about?
I'm confused :-[
