Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Thousands of log entries

    Scheduled Pinned Locked Moved Cache/Proxy
    1 Posts 1 Posters 805 Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • B
      bsmither
      last edited by

      Seen in Status / System Logs / System / General

      The following repeats continuously. Takes about 60 seconds for the loop. The entries are, of course, in reverse chronological order.

      
      php-fpm[42748]: /rc.filter_configure_sync: [squid] Installed but disabled. Not installing 'filter' rules.
      php-fpm[42748]: /rc.filter_configure_sync: [squid] Installed but disabled. Not installing 'pfearly' rules.
      xinetd[7131]: Reconfigured: new=0 old=1 dropped=0 (services)
      xinetd[7131]: readjusting service 6969-udp
      xinetd[7131]: Swapping defaults
      xinetd[7131]: Starting reconfiguration
      php-fpm[42748]: /rc.filter_configure_sync: [squid] Installed but disabled. Not installing 'nat' rules.
      (squid-1): No HTTP, HTTPS, or FTP ports configured
      php-fpm[16953]: /rc.filter_configure_sync: [squid] Installed but disabled. Not installing 'filter' rules.
      (squid-1): No HTTP, HTTPS, or FTP ports configured
      php-fpm[16953]: /rc.filter_configure_sync: [squid] Installed but disabled. Not installing 'pfearly' rules.
      xinetd[7131]: Reconfigured: new=0 old=1 dropped=0 (services)
      xinetd[7131]: readjusting service 6969-udp
      xinetd[7131]: Swapping defaults
      xinetd[7131]: Starting reconfiguration
      (squid-1): No HTTP, HTTPS, or FTP ports configured
      check_reload_status: Reloading filter
      php-fpm[16953]: /rc.filter_configure_sync: [squid] Installed but disabled. Not installing 'nat' rules.
      (squid-1): No HTTP, HTTPS, or FTP ports configured
      Squid_Alarm[41421]: Squid has resumed. Reconfiguring filter.
      check_reload_status: Reloading filter
      Squid_Alarm[39153]: Reconfiguring filter...
      (squid-1): No HTTP, HTTPS, or FTP ports configured
      Squid_Alarm[36978]: Attempting restart...
      Squid_Alarm[36629]: Squid has exited. Reconfiguring filter.
      php-fpm[14520]: /rc.filter_configure_sync: [squid] Installed but disabled. Not installing 'filter' rules.
      
      

      Squid is installed but not enabled (as best I can tell).

      Pfsense v2.3.1_1
      Squid v0.4.18

      1 Reply Last reply Reply Quote 0
      • First post
        Last post
      Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.