Pfsense and Barracuda IPSEC
-
I have ..
Pfsense 2.3.2
Barracuda 5.4
IPsec tunnel connection established successfully but PING NOT working at all.
Please help me ….
-
any one can help :'(
-
Nowhere close to enough information. Sorry.
If English is not your native language you might want to start in your language-specific forum.
-
@Derelict@ Good support by the Way! ;D
here's the steps: Please see it and tell me if there's anything wrong
https://campus.barracuda.com/product/nextgenfirewallf/article/display/BNGv54/How+to+Create+an+IPsec+VPN+Tunnel+between+the+Barracuda+NG+Firewall+and+a+pfSense+Firewall/#h4_2
The only difference i did was:
Change Barracuda phase 1:
Lifetime [sec] 28800
Min. Lifetime [sec] 28800
Max. Lifetime [sec] 28800Change Barracuda phase 2:
Lifetime [sec] 3600
Min. Lifetime [sec] 3600
Max. Lifetime [sec] 3600Change Barracuda DPD interval (s) field, enter 10
Connected successfully but PING sometimes not working, whats wrong ?
-
Sometimes not working?
You are still providing nowhere close to the information needed to help you.
Your problem might very well be on the Barracuda side. Impossible to know.
What are the firewall rules on the IPsec tab? Post a screen shot.