OpenVpn with hide.me vpn service

sensemann

Hello, I ll try to use hide.me VPN with pfSense.
Can anybody help me please get it up and running?
Thanks!

OpenVPN log

pid=0 DATA len=0

Oct 25 20:01:49 openvpn 19452 MANAGEMENT: Client disconnected
Oct 25 20:01:49 openvpn 19452 MANAGEMENT: CMD 'state 1'
Oct 25 20:01:49 openvpn 19452 MANAGEMENT: Client connected from /var/etc/openvpn/client2.sock

clicking openvpn "restart"

pid=0 DATA len=0

Oct 25 19:57:00 openvpn 66142 UDPv4 link remote: [AF_INET]xxx:4000
Oct 25 19:57:00 openvpn 66142 UDPv4 link local (bound): [AF_INET]xxxx
Oct 25 19:57:00 openvpn 66142 Expected Remote Options hash (VER=V4): '5h7d6dee'
Oct 25 19:57:00 openvpn 66142 Local Options hash (VER=V4): '00c598bf'

the VPN interface is just "enabled", no other settings
IPv4 Configuration Type = NONE
IPv6 Configuration Type = NONE

is this correct?!

** StatusOpenVPN**

hideme UDP down

Status / Interfaces
HIDEMEVPN Interface (opt14, ovpnc2)

Status
up
MAC Address
00:00:00:00:00:00 - Xerox
IPv6 Link Local
fe80::xxxxx
MTU
1500

Status / Dashboard

HIDEMEVPN_VPNV4
~
Pending Pending Pending Unknown

HIDEMEVPN_VPNV6
~
Pending Pending Pending Unknown

sensemann

Hello,
do have someone an idea?

Would be nice!

Cheers!

sensemann

Hello,
I am still looking for a way howto connect pfsense with a VPN Service.

Best Regards
sensemann

Murrayd222

I would imagine that you could follow the guide to setting up a Private Internet Access (PIA) VPN, and just replace anything in the guide that is specific to PIA with the information from hide.me. Maybe combine a tutorial for PIA with the hide.me tutorial for setting up a client on an DD-WRT Router? The hide.me DD-WRT guide on their site for an OpenVPN configuration should give you what you need to swap out with PIA when following the PIA guide.

DDWRT Guide: https://hide.me/en/vpnsetup/ddwrt/openvpn/

PIA Guide for pfSense: https://forum.pfsense.org/index.php?topic=76015.0