[Résolu] Le service IGMP Proxy ne démarre pas
-
Bonsoir,
Comme indiqué dans le sujet, le service IGMP Proxy ne démarre pas ! :o
Le but étant de pouvoir récupérer le flux du service télé d'Orange.
Le contexte :
2.3.2-RELEASE (amd64)
built on Tue Jul 19 12:44:43 CDT 2016
FreeBSD 10.3-RELEASE-p5WAN 1 : orange DHCP / IPPUBLIQUE (fibre) => interface physique re0
WAN 2 : free DHCP / IPPUBLIQUE (adsl) => interface physique em2
VLAN838 & VLAN840 => BRIDGE0 => interface physique re0igmpproxy.conf
##------------------------------------------------------ ## Enable Quickleave mode (Sends Leave instantly) ##------------------------------------------------------ quickleave phyint bridge0 upstream ratelimit 0 threshold 1 altnet 193.0.0.0/8 altnet 80.0.0.0/8 altnet 172.0.0.0/8 altnet 81.0.0.0/8 phyint em1 downstream ratelimit 0 threshold 1 altnet 192.168.38.0/24 phyint re0_vlan832 disabled phyint em2 disabled phyint re0_vlan838 disabled phyint re0_vlan840 disabled
Log
Nov 7 19:40:21 php-fpm 57463 /status_services.php: Started IGMP proxy service. Nov 7 19:40:21 igmpproxy 80768 adding VIF, Ix 0 Fl 0x0 IP 0xfe26a8c0 em1, Threshold: 1, Ratelimit: 0 Nov 7 19:40:21 igmpproxy 80768 adding VIF, Ix 1 Fl 0x0 IP 0xab7bb558 em2, Threshold: 1, Ratelimit: 0 Nov 7 19:40:21 igmpproxy 80768 There must be at least 2 Vif's where one is upstream.
J'ai essayé de le lancer en ligne de commande, ci-dessous le retour.
igmpproxy -d -vvvv /tmp/igmpproxy.conf
Searching for config file at '/tmp/igmpproxy.conf'
Config: Quick leave mode enabled.
Config: Got a phyint token.
Config: IF: Config for interface bridge0.
Config: IF: Got upstream token.
Config: IF: Got ratelimit token '0'.
Config: IF: Got threshold token '1'.
Config: IF: Got altnet token 193.0.0.0/8.
Config: IF: Altnet: Parsed altnet to 193/8.
Config: IF: Got altnet token 80.0.0.0/8.
Config: IF: Altnet: Parsed altnet to 80/8.
Config: IF: Got altnet token 172.0.0.0/8.
Config: IF: Altnet: Parsed altnet to 172/8.
Config: IF: Got altnet token 81.0.0.0/8.
Config: IF: Altnet: Parsed altnet to 81/8.
IF name : bridge0
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 1
Allowednet ptr : 1018040
Config: Got a phyint token.
Config: IF: Config for interface em1.
Config: IF: Got downstream token.
Config: IF: Got ratelimit token '0'.
Config: IF: Got threshold token '1'.
Config: IF: Got altnet token 192.168.38.0/24.
Config: IF: Altnet: Parsed altnet to 192.168.38/24.
IF name : em1
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 2
Allowednet ptr : 1018080
Config: Got a phyint token.
Config: IF: Config for interface re0_vlan832.
Config: IF: Got disabled token.
IF name : re0_vlan832
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 0
Allowednet ptr : 0
Config: Got a phyint token.
Config: IF: Config for interface em2.
Config: IF: Got disabled token.
IF name : em2
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 0
Allowednet ptr : 0
Config: Got a phyint token.
Config: IF: Config for interface re0_vlan838.
Config: IF: Got disabled token.
IF name : re0_vlan838
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 0
Allowednet ptr : 0
Config: Got a phyint token.
Config: IF: Config for interface re0_vlan840.
Config: IF: Got disabled token.
IF name : re0_vlan840
Next ptr : 0
Ratelimit : 0
Threshold : 1
State : 0
Allowednet ptr : 0
buildIfVc: Interface em1 Addr: 192.168.38.254, Flags: 0xffff8843, Network: 192.168.38/24
buildIfVc: Interface em2 Addr: 88.181.123.XXX, Flags: 0xffff8843, Network: 88.181.123/24
buildIfVc: Interface lo0 Addr: 127.0.0.1, Flags: 0xffff8049, Network: 127/8
Found config for em1
Found config for em2
adding VIF, Ix 0 Fl 0x0 IP 0xfe26a8c0 em1, Threshold: 1, Ratelimit: 0
Network for [em1] : 192.168.38/24
Network for [em1] : 192.168.38/24
adding VIF, Ix 1 Fl 0x0 IP 0xab7bb558 em2, Threshold: 1, Ratelimit: 0
Network for [em2] : 88.181.123/24
There must be at least 2 Vif's where one is upstream.Détail étrange (pour moi ;D) pourquoi est-ce l'ip du WAN2 (FAI Free) qui ressort ?
Par avance merci,
Kali'
-
:'(
-
Salut salut
Kali j'ai portant lu ton poste et je suis surpris que personne n'est pu te répondre tôt.
Personnellement je n'ai pas de réponse.Mais j'aurais quand même une petite question.
- Est ce qu'avant de mettre en place tes vlan sur la partie orange ton igmp proxy était il fonctionnel ?
++
-
Salut :)
Il s'agit d'un bug.
=> https://redmine.pfsense.org/issues/6099
-
Salut salut
Kali, bon c'est déjà çà, problème identifié par la team pf.
En espérant que cela soit résolu au plus vite par une release ou un hotfix prochain.++