Pfsense Vlan + Cisco SG300

[Libs]

good evening everyone

I need your help, I'm already having this problem for a few months, I'm running Pfsense on a virtual machine (Hyper-V) and I'm trying to create vlan on a single PFsense port, and it's connected to a cisco sg 300 switch

I'll try to describe

Pfsense configuration:

Vlan16: 192.168.16.1
Vlan32: 192.168.32.1

Dhcp

192.168.16.10 - 192.168.16.20
192.168.32.10 - 192.168.32.20

Firewall:

Open any two Vlan

Cisco Configuration:

Porta Ge10 - Connection port to Pfsense

Switchport mode trunk
Switchport trunk allow vlan add 16
Switchport trunk allow vlan add 32

Ports 1-4

Switchport mode access
Switchport access vlan 16

Doors 5-8

Switchport mode access
Switchport access vlan 32

However with the above configuration I can not put the equipment into operation

Can someone help?