Проблема со squid после обновления с 2.1 до 2.3.2-RELEASE
-
Автоматически обновил версию системы и получил проблемы. До обновления у меня работал прокси. После обновления squid отсутсвует в сервисах. Пробую поставить его вручую из пакетов. Получаю:
Number of packages to be installed: 4
The process will require 10 MiB more space.
[1/4] Installing squid-3.5.19_1…
===> Creating groups.
Using existing group 'squid'.
===> Creating users
Using existing user 'squid'.
===> Pre-installation configuration for squid-3.5.19_1
[1/4] Extracting squid-3.5.19_1: …....... done
pkg: Fail to rename /usr/local/etc/squid/errors/.zh-cn.ghlEmce6c83g -> /usr/local/etc/squid/errors/zh-cn: Is a directory
FailedПосоветуйте как исправить. При чем хотелось бы сохранить список пользователй
p.s Старую тему, привычную для меня, с меню с левой стороны теперь не вернуть? -
Возможно нашел решение:
rm -rf /usr/local/etc/squid/ -
Squid становится неактивным через некоторое время. В логах:
Jan 21 12:13:14 php-fpm 45451 /rc.start_packages: Restarting/Starting all packages. Jan 21 12:13:14 php-fpm 45451 /rc.start_packages: [squid] - squid_resync function call pr: bp: rpc:no Jan 21 12:13:15 php-fpm 45451 /rc.start_packages: [squid] Removing cronjobs ... Jan 21 12:13:15 php-fpm 45451 /rc.start_packages: [squid] Antivirus features disabled. Jan 21 12:13:15 php-fpm 45451 /rc.start_packages: [squid] Removing freshclam cronjob. Jan 21 12:13:18 check_reload_status Reloading filter Jan 21 12:13:19 php-fpm 29597 /rc.filter_configure_sync: [squid] Installed but disabled. Not installing 'nat' rules. Jan 21 12:13:19 xinetd 13606 Starting reconfiguration Jan 21 12:13:19 xinetd 13606 Swapping defaults Jan 21 12:13:19 xinetd 13606 readjusting service 6969-udp Jan 21 12:13:19 xinetd 13606 Reconfigured: new=0 old=1 dropped=0 (services) Jan 21 12:13:19 php-fpm 29597 /rc.filter_configure_sync: [squid] Installed but disabled. Not installing 'pfearly' rules. Jan 21 12:13:19 php-fpm 29597 /rc.filter_configure_sync: [squid] Installed but disabled. Not installing 'filter' rules. Jan 21 12:13:20 login login on ttyv0 as root Jan 21 12:13:20 sshlockout 60869 sshlockout/webConfigurator v3.0 starting up Jan 21 12:13:55 php-fpm 69118 /index.php: Successful login for user 'admin' from: 192.168.0.75 Jan 21 12:14:22 kernel pid 55774 (squid), uid 100: exited on signal 6 Jan 21 12:14:59 kernel pid 57818 (squid), uid 100: exited on signal 6 Jan 21 12:15:35 kernel pid 98978 (squid), uid 100: exited on signal 6 Jan 21 12:15:38 kernel pid 84645 (squid), uid 100: exited on signal 6 Jan 21 12:15:44 kernel pid 85707 (squid), uid 100: exited on signal 6 Jan 21 12:15:47 kernel pid 96540 (squid), uid 100: exited on signal 6 Jan 21 12:15:57 kernel pid 97138 (squid), uid 100: exited on signal 6 Jan 21 12:16:00 kernel pid 8590 (squid), uid 100: exited on signal 6 Jan 21 12:16:08 Squid_Alarm 20957 Squid has exited. Reconfiguring filter. Jan 21 12:16:08 Squid_Alarm 21224 Attempting restart... Jan 21 12:16:11 Squid_Alarm 22687 Reconfiguring filter... Jan 21 12:16:11 check_reload_status Reloading filter Jan 21 12:16:12 php-fpm 9643 /rc.filter_configure_sync: [squid] Installed but disabled. Not installing 'nat' rules. Jan 21 12:16:12 xinetd 13606 Starting reconfiguration Jan 21 12:16:12 xinetd 13606 Swapping defaults Jan 21 12:16:12 xinetd 13606 readjusting service 6969-udp Jan 21 12:16:12 xinetd 13606 Reconfigured: new=0 old=1 dropped=0 (services) Jan 21 12:16:12 php-fpm 9643 /rc.filter_configure_sync: [squid] Installed but disabled. Not installing 'pfearly' rules. Jan 21 12:16:12 php-fpm 9643 /rc.filter_configure_sync: [squid] Installed but disabled. Not installing 'filter' rules.Что он хочет?
-
Доброе
Сохраните конфиг с пакетами и без. Поставьте с нуля. После - установите только сквид и посмотрите, что будет. Если все ок и больше пакетов не было установлено - подгрузите конфиг без пактов.Или подгрузите коняиг со всеми пакетами. Как пойдет.
