FreeSWITCH package for pfSense 1.2.1 and 2.0 released. PBX or Proxy
-
The system I'm running is working fine on pfSense 1.2.3.
I'm currently on IRC at #pfsense-freeswitch. Those with problems please contact me there and I will help you get your systems working. As the problem is identified I will get it fixed in the package.
Mark
-
I updated my test 1.2.2 machine to 1.2.3 (today's build) and freeswitch was a no-go just like 1.2.2
I then updated to 2.0 and it looked like it was running (service was running) but I could not get to it from the web admin page. That does not say much to me, as when I rebooted I could not get to even the login page. I count that as a pfsense issue.
I then reinstalled a fresh copy of 1.2.3 (not upgrade as in 1st attempt). Still no go (even after reboot).
Service won't start…
So it's either that some 1.2.3 build let freeswitch work, while the new build does not. That or it's related to a specific hardware that it's working/not working.
I don't have too much of specialized hardware. Main pfsense is an AMD Sempron LE-1150, 1 VIA onboard NIC, 1 Intel PIC NIC.
Other test machine is an ATOM 330 with 2 realtek NICS (yah they suck, but it's a test machine)Maybe you can go back to older and freeswitch build until the 0.8 bugs are worked out?
-
Running 2.0-ALPHA-ALPHA built on Thu Jan 15 23:00:25 EST 2009 FreeBSD 7.1-RELEASE-p2 still here.
latest freeswitch package installed fine for me. Running now…
-
Mcrane is working on resurrecting an older version for us 1.2.2 guys- this is a known bug for FS and freebsd 7.0..
I'll be happy to test and confirm… ;D ;D
-
I have a work around until the bug is fixed for FreeSWITCH on FreeBSD 7.0 (pfSense 1.2.1 or 1.2.2)
Once you have the package installed go to Diagnostics -> Command -> PHP Execute then run the following commands. The following PHP code will download a FreeSWITCH build from Jan 2009 and replace the build that comes in the package. (please note this is not the entire install procedure so you must have the package already installed)
require_once("config.inc");
require_once("/usr/local/pkg/freeswitch.inc");
exec("cd /tmp/;fetch http://portableusbapps.com/packages/config/freeswitch/freeswitch.1.jan.2009.tgz");
exec("cp /tmp/freeswitch.1.jan.2009.tgz /tmp/freeswitch.tgz");
unlink_if_exists("/tmp/freeswitch.1.jan.2009.tgz");
freeswitch_php_install_command(); -
I'm running 1.2.3 from Feb 18th and I also couldn't get the new FS package working. Mcrane's php fix worked for my system; I'm back up now.
This issue brings up an interesting scenario that pfSense really needs some type of version control for packages, or at least a "roll back" feature (sorry to use a M$ term).
Thanks for fixing this Mcrane; I bet that was a lot of work.
-
Thank you, the workaround works for me
Bye
-
working like a charm on 1.2.2 now to get this thing configured.. ???
-
mcrane, you mention 1.2.2 and 1.2.1. I seem to have this issue on my now 1.2.3 test machine also (others seem to also have this problem).
I also see an updated version available. Does that mean the updated version is for 1.2.3 / 2.0 and the workaround script is for the 1.2.1/1.2.2 versions?Ditto with the others. Tonight it's back to where I left off, that damm internal setting so my extensions can talk to each other…...
-
I am on 1.2.2, the script did not help. I am still facing with the same issue.
-
Freeswitch Version 0.8.3.1
1 Test Machine 1.2.3 Yesterday's build. Now up and running
1 Production machine 1.2.2 - No go as advertisedOn 1.2.2 used the supplied script…
Worked as advertised! Wohooo... back to playing!Now that I've tested 1.2.3 I'm even tempted to switch the production machine.....
-
Need Help:
For those that still need help catch me on #pfsense-freeswitch irc channel. New to IRC I recommend using chatzilla which is a simple Firefox add on then just search for the #pfsense-freeswitch channel and join it.Backup Package:
I am planning on building a pfSense backup package that will be designed to backup whatever package files are desired. It will be designed to create a single tgz backup file for any directories that are listed to backup. Such a backup package could be used to "roll back" a package.It would also be useful to back pfSense, FreeSWITCH, TFTP files, RRD graph data, logs, and any other future packages.
Trouble Shooting Tip:
If you are having problems starting FreeSWITCH then the following will help you see what is wrong.
1. Enable SSH on pfSense
2. Connect to the console or through SSH
3. cd /usr/local/freeswitch/bin
4. check to see if freeswitch is running with the following:
ps -waux | grep freeswitch
5. start FreeSWITCH from the console
./freeswitch
Watch for immediate errors an execution ending or red errors that indicate something has gone wrong.If you FreeSWITCH is running and you want to connect to monitor the console
1. cd /usr/local/freeswitch/bin
2. Replace the 192.168.1.1 with your LAN IP address.
./fs_cli -H 192.168.1.1 -
Man that's cool! Thanks Mcrane. Updating now.
…seriously "moderators", we need to change his status to Super Hero Member.
-
Trying to reinstall last night and this morning my box gets to "Loading package configuration… "
and never goes any farther... Ideas?
Running pfSense 2.0
"Fatal error: Cannot create references to/from string offsets nor overloaded objects in /etc/inc/xmlparse.inc on line 68 "
-
This error is a bug on pfSense 2.0. Try a different snapshot build of pfSense 2.0.
"Fatal error: Cannot create references to/from string offsets nor overloaded objects in /etc/inc/xmlparse.inc on line 68 "
-
Thanks!
;D
-
Any suggestions which snap to use for 2.0? The jan 15 version I was using worked for the longest time but now wont.?..
The latest version wont work with the same results…
-
I'm having issues with inbound calling. Anyone have suggestions?
I've got 2 providers (2 DID), and unknowingly, I have both with the same username.
The problem is that during inbound calls, the destination_number is coming in as my username in freeswitch (both providers). So for my call routing in the public tab, I cannot use destination_number to tell which call is coming in (number is not being recognised). I thought I would use the Network_addr as a condition, but if I put the ip address, it does not find a match, even though it looks like it's right
Regex: [1001] network_addr(66.51.127.173) =~ /(66.51.127.173)/The numbers are identical, so it has to be a formatting thing.
I also have an issue where if I call in and the calls goes to voicemail, I cannot leave a message. As I talk into the phone to leave the message, it stops and says it is below minimum record length, even thought I am still talking. This is not an issue if I am calling from extension to extension.
Love the software, lots of fun things to play with still….
-
chpalmer: The snapshots I tested where saved on a laptop that has a power issue and will no longer power up.
tester_02: on the public tab use an anti-action as a catch all then for the action set it to info and leave the data field empty. The go to the console and watch for info a call coming in from each gateway. 'info' will send information to the console which will show in green. You can then use any of that information with the condition and direct your calls accordingly. So all you will need to do is look for something unique among the info to determine how to route the call.
On your voicemail issue it sounds like you are having a one way sound audio problem. You should test by calling another extension inside the same network. It could be simply settings needing to be adjusted on the phone.
-
@mcrane:
tester_02: on the public tab use an anti-action as a catch all then for the action set it to info and leave the data field empty. The go to the console and watch for info a call coming in from each gateway. 'info' will send information to the console which will show in green. You can then use any of that information with the condition and direct your calls accordingly. So all you will need to do is look for something unique among the info to determine how to route the call.
The only unique thing that I could get was the ip.
so I set the network_addr to be equal to the ip. That did not work, so I pit the ip to be ^(ip)$ but it does not work. I've looked at some freeswitch forums but it's not leading me to the right direction, I keep getting..
Regex: [1001] network_addr(66.51.127.173) =~ /(66.51.127.173)/It has to just be a syntax thing. Any idea what the proper sytax could be?
As for the voicemail issue…'ll play with the phone and see what's going on. Strange thing is I can have a conversation on the phone (so I know audio works), it's just the voicemail recorder that does not hear it.
One last question, what do you have for dialplan settings on your phone? Do you blank them out and let freeswitch do the plan?
Thanks again!
