Unofficial E2guardian package for pfSense
-
You can remove packages under console using pkg binary. (pkg info, pkg delete, etc…)
I'm changing the package structure to be able to install, remove, update it easier.
Thank you Marcello ;D
Is it meant to deinstall Squid so I have to start all over again with that too?
-
Is there any way to turn off Tiny proxy once and for all? It's really frustrating because I use Squid and it keeps starting up when I change any configurations on E2Guardian.
-
Is there any way to turn off Tiny proxy once and for all? It's really frustrating because I use Squid and it keeps starting up when I change any configurations on E2Guardian.
I'll split it in two packages when I have time.
-
Is there any way to turn off Tiny proxy once and for all? It's really frustrating because I use Squid and it keeps starting up when I change any configurations on E2Guardian.
I'll split it in two packages when I have time.
Thanks Marcello! Or you could create a off switch? :P
-
Is there any way to turn off Tiny proxy once and for all? It's really frustrating because I use Squid and it keeps starting up when I change any configurations on E2Guardian.
I'll split it in two packages when I have time.
Thanks Marcello! Or you could create a off switch? :P
I can't remember what I did but I think I commented out a few lines in /usr/local/etc/rc.d/tinyproxy so it wouldnt started
#!/bin/sh # $FreeBSD: branches/2017Q1/www/tinyproxy/files/tinyproxy.in 340872 2014-01-24 00:14:07Z mat $ # # PROVIDE: tinyproxy # REQUIRE: LOGIN # # Add the following lines to /etc/rc.conf.local or /etc/rc.conf to enable tinyproxy: # tinyproxy_enable (bool): Set to "NO" by default. # Set it to "YES" to enable tinyproxy # tinyproxy_config (path): Set to "/usr/local/etc/tinyproxy.conf" by default. . /etc/rc.subr name="tinyproxy" rcvar=tinyproxy_enable load_rc_config $name # Make sure the pidfile matches what's in the config file. : ${tinyproxy_enable="NO"} : ${tinyproxy_pidfile="/var/run/tinyproxy.pid"} : ${tinyproxy_config="/usr/local/etc/tinyproxy.conf"} # pidfile=${tinyproxy_pidfile} # command=/usr/local/sbin/tinyproxy # command_args="-c $tinyproxy_config 2> /dev/null" # run_rc_command "$1"Thank you for sharing your block page!
-
False positive. I got the testing repo from e2guardian but compiled a 3.5.1 version instead of 4.1. :(
I've include the dump of the crash on e2guardian git
I could stop it from crashing but did not had time to see why this 4.1.1 BSD amd64 e2g binaries is not intercepting ssl.
Not sure if all http workers from 4.1.1 needs to be running or it's something that will happen with traffic.
https://github.com/e2guardian/e2guardian/pulls
-
False positive. I got the testing repo from e2guardian but compiled a 3.5.1 version instead of 4.1. :(
I've include the dump of the crash on e2guardian git
I could stop it from crashing but did not had time to see why this 4.1.1 BSD amd64 e2g binaries is not intercepting ssl.
Not sure if all http workers from 4.1.1 needs to be running or it's something that will happen with traffic.
https://github.com/e2guardian/e2guardian/pulls
Great we're making progress. Your pull was merged. :)
Don't worry, look at it when you have time. I'm very happy to see so much interest in E2Guardian now. Even at the stage it's in, it's way surpassed what SquidGuard could even hope to achieve.
That being said. On 4.1.1 the 'error too many redirects' issue was fixed and Philip Pearce, blamed the time out for Squid etc. I've tried messing with it, but still get the message from time to time although less so now after increasing time out to 60 secs.
-
I can't remember what I did but I think I commented out a few lines in /usr/local/etc/rc.d/tinyproxy so it wouldnt started
#!/bin/sh # $FreeBSD: branches/2017Q1/www/tinyproxy/files/tinyproxy.in 340872 2014-01-24 00:14:07Z mat $ # # PROVIDE: tinyproxy # REQUIRE: LOGIN # # Add the following lines to /etc/rc.conf.local or /etc/rc.conf to enable tinyproxy: # tinyproxy_enable (bool): Set to "NO" by default. # Set it to "YES" to enable tinyproxy # tinyproxy_config (path): Set to "/usr/local/etc/tinyproxy.conf" by default. . /etc/rc.subr name="tinyproxy" rcvar=tinyproxy_enable load_rc_config $name # Make sure the pidfile matches what's in the config file. : ${tinyproxy_enable="NO"} : ${tinyproxy_pidfile="/var/run/tinyproxy.pid"} : ${tinyproxy_config="/usr/local/etc/tinyproxy.conf"} # pidfile=${tinyproxy_pidfile} # command=/usr/local/sbin/tinyproxy # command_args="-c $tinyproxy_config 2> /dev/null" # run_rc_command "$1"Thank you for sharing your block page!
No problem, happy to give back to the community! :)
I'm not an expert with this, so I went with the safest method and set the bool tinyproxy_enable "NO" at the end of the script. Now Tinyproxy doesn't start up anymore! :D
-
No problem, happy to give back to the community! :)
I'm not an expert with this, so I went with the safest method and set the bool tinyproxy_enable "NO" at the end of the script. Now Tinyproxy doesn't start up anymore! :D
That works too =D, and a lot cleaner/safer
-
Added e2guardian4 to Unofficial repo 8)
tinyproxy may not install by default.
Also testing on 2.4(looks faster)
But I'm seeing only one e2guardian process. I'm not sure if it's the correct behavior or still has things to fix to run correctly under Freebsd
-
Added e2guardian4 to Unofficial repo 8)
tinyproxy may not install by default.
Also testing on 2.4(looks faster)
But I'm seeing only one e2guardian process. I'm not sure if it's the correct behavior or still has things to fix to run correctly under Freebsd
Does SSL interception and all work? Are the bugs you found squashed? Is the dependencies in the package manager meant to be e2guardian_35-3.5.1? It seems exactly the same as the old 3.5.1 version, but I haven't installed it yet.
Also it's threaded now right? Maybe that's why you're seeing only one process.
EDIT: So I ended updating E2Guardian via SSH by typing "13". Now it won't even start up. I am getting this error in logs
/pkg_edit.php: The command '/usr/local/etc/rc.d/e2guardian.sh start' returned exit code '1', the output was 'kern.ipc.somaxconn: 16384 -> 16384 kern.maxfiles: 131072 -> 131072 kern.maxfilesperproc: 104856 -> 104856 kern.threads.max_threads_per_proc: 4096 -> 4096 Starting e2guardian. Shared object "libssl.so.9" not found, required by "e2guardian" /usr/local/etc/rc.d/e2guardian.sh: WARNING: failed to start e2guardian'Also pfsense doesn't seem to be able to load the repo anymore. :(
Error:
>>> Updating repositories metadata... Updating Unofficial repository catalogue... Fetching meta.txz: . done Fetching packagesite.txz: . done Processing entries: . done Unofficial repository update completed. 8 packages processed. Updating pfSense-core repository catalogue... pkg: Repository pfSense-core load error: access repo file(/var/db/pkg/repo-pfSense-core.sqlite) failed: No such file or directory pkg: https://pkg.pfsense.org/pfSense_v2_3_4_amd64-core/meta.txz: No route to host repository pfSense-core has no meta file, using default settings pkg: https://pkg.pfsense.org/pfSense_v2_3_4_amd64-core/packagesite.txz: No route to host Unable to update repository pfSense-core Updating pfSense repository catalogue... pkg: Repository pfSense load error: access repo file(/var/db/pkg/repo-pfSense.sqlite) failed: No such file or directory pkg: https://pkg.pfsense.org/pfSense_v2_3_4_amd64-pfSense_v2_3_4/meta.txz: No route to host repository pfSense has no meta file, using default settings pkg: https://pkg.pfsense.org/pfSense_v2_3_4_amd64-pfSense_v2_3_4/packagesite.txz: No route to host Unable to update repository pfSense Error updating repositories!Being kinda screwed and out of choices… I changed Squid's port to 8080. Otherwise I get no connection at all, due to WPAD and settings on devices.
-
Does SSL interception and all work?
Yes.
Are the bugs you found squashed?
Not sure yet. youtube looks like was working better with 3.5 but it's to early to make a conclusion about it. I've tested only few minutes
Is the dependencies in the package manager meant to be e2guardian_35-3.5.1? It seems exactly the same as the old 3.5.1 version, but I haven't installed it yet.
Maybe because both are e2guardian packages. To change it on ports to a e2guardian4 takes some time
Also it's threaded now right? Maybe that's why you're seeing only one process.
Yes, I need to test it to see how far it can go with processing multiple cores, memory and throughput
EDIT: So I ended updating E2Guardian via SSH by typing "13". Now it won't even start up. I am getting this error in logs
/pkg_edit.php: The command '/usr/local/etc/rc.d/e2guardian.sh start' returned exit code '1', the output was 'kern.ipc.somaxconn: 16384 -> 16384 kern.maxfiles: 131072 -> 131072 kern.maxfilesperproc: 104856 -> 104856 kern.threads.max_threads_per_proc: 4096 -> 4096 Starting e2guardian. Shared object "libssl.so.9" not found, required by "e2guardian" /usr/local/etc/rc.d/e2guardian.sh: WARNING: failed to start e2guardian'e2guardian4 needs openssl. On my 2.4 test vm it installed as a dependence. I'll test again on a clean 2.3
you can try pkg install openssl from consoleAlso pfsense doesn't seem to be able to load the repo anymore. :(
Error:
pkg: https://pkg.pfsense.org/pfSense_v2_3_4_amd64-core/meta.txz: No route to host pkg: https://pkg.pfsense.org/pfSense_v2_3_4_amd64-core/packagesite.txz: No route to host pkg: https://pkg.pfsense.org/pfSense_v2_3_4_amd64-pfSense_v2_3_4/meta.txz: No route to host pkg: https://pkg.pfsense.org/pfSense_v2_3_4_amd64-pfSense_v2_3_4/packagesite.txz: No route to hostI've removed the previous package and then installed the e2guardian4 package
I have no idea why you are getting no route to host.
-
Also, the gui package files form 3.5.1 to 4 are different (e2guardian to e2guardian4)
-
pfSense-pkg-E2guardian-0.9.2.txz
-
pfSense-pkg-E2guardian4-0.1.txz
EDIT
Got this removing 3.5.1 and then instaling 4
>>> Installing pfSense-pkg-E2guardian4... Updating Unofficial repository catalogue... Fetching meta.txz: . done Fetching packagesite.txz: . done Processing entries: . done Unofficial repository update completed. 8 packages processed. Updating pfSense-core repository catalogue... pfSense-core repository is up to date. Updating pfSense repository catalogue... pfSense repository is up to date. All repositories are up to date. The following 3 package(s) will be affected (of 0 checked): New packages to be INSTALLED: pfSense-pkg-E2guardian4: 0.1 [Unofficial] e2guardian: 4.1.1 [Unofficial] openssl: 1.0.2l,1 [Unofficial] Number of packages to be installed: 3 The process will require 15 MiB more space. 3 MiB to be downloaded. [1/3] Fetching pfSense-pkg-E2guardian4-0.1.txz: ...... done [2/3] Fetching e2guardian-4.1.1.txz: .......... done [3/3] Fetching openssl-1.0.2l,1.txz: .......... done Checking integrity... done (0 conflicting) [1/3] Installing e2guardian-4.1.1... [1/3] Extracting e2guardian-4.1.1: .......... done [2/3] Installing pfSense-pkg-E2guardian4-0.1... [2/3] Extracting pfSense-pkg-E2guardian4-0.1: .......... done Saving updated package information... done. Loading package configuration... done. Configuring package components... Loading package instructions... Custom commands... Executing custom_php_install_command()...Checking E2guardian Blacklists... One moment please...Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |--- /usr/local/www/pkg_edit.orig.php 2017-04-05 17:12:56.478730000 -0300 |+++ /usr/local/www/pkg_edit.php 2017-04-05 17:13:51.614222000 -0300 -------------------------- Patching file /usr/local/www/pkg_edit.php using Plan A... Ignoring previously applied (or reversed) patch. Hunk #1 ignored at 656. 1 out of 1 hunks ignored--saving rejects to /usr/local/www/pkg_edit.php.rej done Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |--- /usr/local/www/pkg.orig.php 2017-04-05 17:18:25.349676000 -0300 |+++ /usr/local/www/pkg.php 2017-04-05 17:20:49.204578000 -0300 -------------------------- Patching file /usr/local/www/pkg.php using Plan A... Ignoring previously applied (or reversed) patch. Hunk #1 ignored at 329. 1 out of 1 hunks ignored--saving rejects to /usr/local/www/pkg.php.rej doneiniciodone.
Executing custom_php_resync_config_command()...```
iniciodone.
Menu items... done.
Services... done.
Writing configuration... done.
[3/3] Installing openssl-1.0.2l,1...
Extracting openssl-1.0.2l,1: .......... done
Message from e2guardian-4.1.1:
===> Please Note:
This port has created a log file named e2guardian.log that can get
quite large. Please read the newsyslog(8) man page for instructions
on configuring log rotation and compression.This port has been converted using old dansguardian-devel port
Let me know how it works (or not). (Patches always welcome.)
Message from pfSense-pkg-E2guardian4-0.1:
Please visit Services - E2guardian Server menu to configure the package and enable it.
Message from openssl-1.0.2l,1:
Edit /usr/local/openssl/openssl.cnf to fit your needs.Cleaning up cache... done.
Success -
-
Also, the gui package files form 3.5.1 to 4 are different (e2guardian to e2guardian4)
-
pfSense-pkg-E2guardian-0.9.2.txz
-
pfSense-pkg-E2guardian4-0.1.txz
EDIT
Got this removing 3.5.1 and then instaling 4
>>> Installing pfSense-pkg-E2guardian4... Updating Unofficial repository catalogue... Fetching meta.txz: . done Fetching packagesite.txz: . done Processing entries: . done Unofficial repository update completed. 8 packages processed. Updating pfSense-core repository catalogue... pfSense-core repository is up to date. Updating pfSense repository catalogue... pfSense repository is up to date. All repositories are up to date. The following 3 package(s) will be affected (of 0 checked): New packages to be INSTALLED: pfSense-pkg-E2guardian4: 0.1 [Unofficial] e2guardian: 4.1.1 [Unofficial] openssl: 1.0.2l,1 [Unofficial] Number of packages to be installed: 3 The process will require 15 MiB more space. 3 MiB to be downloaded. [1/3] Fetching pfSense-pkg-E2guardian4-0.1.txz: ...... done [2/3] Fetching e2guardian-4.1.1.txz: .......... done [3/3] Fetching openssl-1.0.2l,1.txz: .......... done Checking integrity... done (0 conflicting) [1/3] Installing e2guardian-4.1.1... [1/3] Extracting e2guardian-4.1.1: .......... done [2/3] Installing pfSense-pkg-E2guardian4-0.1... [2/3] Extracting pfSense-pkg-E2guardian4-0.1: .......... done Saving updated package information... done. Loading package configuration... done. Configuring package components... Loading package instructions... Custom commands... Executing custom_php_install_command()...Checking E2guardian Blacklists... One moment please...Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |--- /usr/local/www/pkg_edit.orig.php 2017-04-05 17:12:56.478730000 -0300 |+++ /usr/local/www/pkg_edit.php 2017-04-05 17:13:51.614222000 -0300 -------------------------- Patching file /usr/local/www/pkg_edit.php using Plan A... Ignoring previously applied (or reversed) patch. Hunk #1 ignored at 656. 1 out of 1 hunks ignored--saving rejects to /usr/local/www/pkg_edit.php.rej done Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |--- /usr/local/www/pkg.orig.php 2017-04-05 17:18:25.349676000 -0300 |+++ /usr/local/www/pkg.php 2017-04-05 17:20:49.204578000 -0300 -------------------------- Patching file /usr/local/www/pkg.php using Plan A... Ignoring previously applied (or reversed) patch. Hunk #1 ignored at 329. 1 out of 1 hunks ignored--saving rejects to /usr/local/www/pkg.php.rej doneiniciodone.
Executing custom_php_resync_config_command()...```
iniciodone.
Menu items... done.
Services... done.
Writing configuration... done.
[3/3] Installing openssl-1.0.2l,1...
Extracting openssl-1.0.2l,1: .......... done
Message from e2guardian-4.1.1:
===> Please Note:
This port has created a log file named e2guardian.log that can get
quite large. Please read the newsyslog(8) man page for instructions
on configuring log rotation and compression.This port has been converted using old dansguardian-devel port
Let me know how it works (or not). (Patches always welcome.)
Message from pfSense-pkg-E2guardian4-0.1:
Please visit Services - E2guardian Server menu to configure the package and enable it.
Message from openssl-1.0.2l,1:
Edit /usr/local/openssl/openssl.cnf to fit your needs.Cleaning up cache... done.
SuccessOkay, I've installed the SSL. Rebooted, got the package installer working then installed version 4.1. And it still wasn't starting, then I disabled "log client hosnames" in the general tab. And it started. So far it seems to be working. I'll keep you updated. Thanks for getting this working! :)
EDIT: SSL interception isn't working. Do I need to edit that : /usr/local/openssl/openssl.cnf ?
-
-
EDIT: SSL interception isn't working.
Some config changes on this 4.1 are "asking" for a service restart.
I'm using ssl interception, with basic authentication and the custom html error page working
Do I need to edit that : /usr/local/openssl/openssl.cnf ?
No. That message is from the bsd package. Not related to e2guardian.
-
EDIT: SSL interception isn't working.
Some config changes on this 4.1 are "asking" for a service restart.
I'm using ssl interception, with basic authentication and the custom html error page working
Do I need to edit that : /usr/local/openssl/openssl.cnf ?
No. That message is from the bsd package. Not related to e2guardian.
I'm using IP Authentication and SSL interception / forging doesn't seem to work at all. Some configs seem to not load up correctly in the GUI until I saved them again, then their correct metadata loaded. I also tried rebooting etc. Didn't fix the SSL issue.
-
I'm using IP Authentication and SSL interception / forging doesn't seem to work at all.
I'll set ip Authentication to see if I get same result.
I'm using squid as parent proxy to be able to use it's authentication.
-
I'm using IP Authentication and SSL interception / forging doesn't seem to work at all.
I'll set ip Authentication to see if I get same result.
I'm using squid as parent proxy to be able to use it's authentication.
I'm also using Squid as a parent proxy, but no extra authentication on that. It's acting quite strange, but I definitely do feel that web pages are snappier. It doesn't feel like everything is going through a proxy anymore. And memory usage so far has dropped by 15% for me, not sure if that's because of SSL issue though.
-
I can't reproduce the issue here. :(
I got ip authentication, correct group, ssl interception and deny pages.
I've unselected soft restart on general tab and also did a restart few seconds after apply config.
-
I'm using IP Authentication and SSL interception / forging doesn't seem to work at all.
Did you enabled ssl on general tab?
It's a new option introduced on 4.1
