Unofficial E2guardian package for pfSense

marcelloc

@genesislubrigas said in Unofficial E2guardian package for pfSense:

Marcelloc, how do you make antivirus work. Everytime i enable it, e2guardian stops.

I did not had time to review antivirus settings changes from versions 4 to 5.

Try to run e2guardian on console(e2guardian -g) to see what config errors it shows.

genesislubrigas

If i select clamdscan or icapscan, it says no process found. If i disselect, it shows no output.

asterix

This post is deleted!

ravegen

Marcelloc,

Thanks for the update. All is well.

denisk

@marcelloc, hello!
I have a two questions:

When we can update e2guardian to 5.1 version?
How I can make that ALL traffic follows via icap server on another machine?

In Squid I configured icap like this:

icap_enable on
icap_send_client_ip on
icap_send_client_username on
icap_service service_req reqmod_precache bypass=0 icap://some_icap_ip:1344/echo
adaptation_access service_req allow all
icap_service service_resp respmod_precache bypass=0 icap://some_icap_ip:1344/echo
adaptation_access service_resp allow all

marcelloc

@denisk said in Unofficial E2guardian package for pfSense:

I have a two questions:

When we can update e2guardian to 5.1 version?

just update to the latest version. Gui package version does not follow binary number version(5.1_3).

How I can make that ALL traffic follows via icap server on another machine?

I Did not included icap settings on package gui. You can try to include it by hand editing package config template files.

ravegen

Marcelloc,

Hi,

Is there a way that I can use Lightsquid, web proxy reporting tool with e2guardian. I can see that it needs squid package but your package also have squid.

I believe it is only looking for some squid output file to read from it.

Can you assist me on this ?

ravegen

Marcelloc,

Good day,

I wanna ask how ACL- --> Antivirus Extension, Mime, Site and URL works ? What do you put there on the textbox ?

ravegen

This post is deleted!

reza3sw

@marcelloc I don't know the question I'm asking is right or wrong. Because I'm not too familiar with E2Guardian ....Just a little read about that in your posts and I guess the E2Guardian Somewhat is like squid and squid Guard. That's why I asked this question.

In squid with tcp_outgoing_address you can change outgoing interface from default to another interface

Can this be done on E2Guardian?
Where are the outgoing requests?
if my question is correct ...How we can change outgoin to VPN or another interface for LoadBalance or FaileOver?

Thank's advance

ravegen

@reza3sw

I wonder if you cant create an interface on the interfaces menu. I believe when an interface is created, it will show in the e2guardian interfaces choices.

reza3sw

@ravegen
In E2Guardian Just show Listen Interface(s) (Input interfaces)

My question is where's the output interface?
When traffic come from LAN and Loopback interfaces and process....
Where does go outgoing traffic ?

pfsensation

@reza3sw For the time being, as far as I am aware. E2 Guardian hasn't got the option to select the Outgoing interface. Therefore it just uses the default interface.

I believe Marcello has requested the ability to change this and the E2 Guardian developers are considering it. Since we're on pfSense, it maybe possible to setup some NAT rules to force traffic over a different interface.

pfsensation

@ravegen said in Unofficial E2guardian package for pfSense:

Marcelloc,

Good day,

I wanna ask how ACL- --> Antivirus Extension, Mime, Site and URL works ? What do you put there on the textbox ?

You put what you want to allow or disallow on there. Which one do you need examples for? MIME is a bit more of a hassle to setup than site lists for example.

reza3sw

@pfsensation Thank's for your good answer

pfsensation

@reza3sw سلام

No worries at all, is there a reason you're trying to use one interface over another? Load balancing?

I haven't tested the NAT method myself as I've only got one outgoing WAN link at the moment. If you do give it a shot, let us know if it works!

reza3sw

@pfsensation درود
Thanks for your follow up

In my area some site are blocked and fillter by goverment
That's why ..I have to use VPN for bypass filltering

I use 5 VPN conection on 1 WAN and create gateway group(loadbalncing) with 5 vpn conection
So I want pass traffic from squid or E2Guardian to loadbalancing vpn gateway and block some site like (windows update.. social network , etc...) with E2guardian or squidGuard
But E2guardian or squid sent traffic to default gateway... and I can't use VPN for bypass traffic............

I created Topic for this problem
But no answer
https://forum.netgate.com/topic/134796/squid-5-vpn-conection-on-one-wan

pfsensation

@reza3sw said in Unofficial E2guardian package for pfSense:

@pfsensation درود
Thanks for your follow up

In my area some site are blocked and fillter by goverment
That's why ..I have to use VPN for bypass filltering

I use 5 VPN conection on 1 WAN and create gateway group(loadbalncing) with 5 vpn conection
So I want pass traffic from squid or E2Guardian to loadbalancing vpn gateway and block some site like (windows update.. social network , etc...) with E2guardian or squidGuard
But E2guardian or squid sent traffic to default gateway... and I can't use VPN for bypass traffic............

I created Topic for this problem
But no answer
https://forum.netgate.com/topic/134796/squid-5-vpn-conection-on-one-wan

You are a clever man! I used separate VPN instances too and load balanced across them when I realised that they have speed caps.

I haven't been to Iran myself, but I assume they do the typical DNS level blocking? You can give Cloudflare DNS over TLS a go and see if those sites are unblocked. If it's DNS level blocking, that should circumvent it.

reza3sw

@pfsensation Thank's you are very good
I will check with cloudflare and I say the result.

But the main subject : ( If we have e.g : 3 WAN and use loadbalancing or failover ) and use E2guardian or Squid we can't set outgoing address to loadbalancing or failover.. because E2guardian and squid just use default WAN..

This means traffic port 80,443 just pass from WAN1 (default)

We can use floating rule for OUT Wan control.. But I checked with 1 Wan and 5 VPN connection ...but no answer

I hope the pfsense group provides a solution

pfsensation

@reza3sw If the DNS encryption method I mentioned before works. You can use that for the time being instead until E2 Guardian properly gets this feature of supporting multiple WANs natively.

Have you experimented with trying to get E2 Guardian to use a gateway group?