VPN issue to reach a subnet
-
Hi all,
After lots of tries, I haven't found a solution. I'm setting up an openvpn server. My network is :
- LAN interface : 10.50.99.16
- OPT1 : 10.8.0.1
OpenVPN :
- IPv4 Tunnel Network : 10.8.0.0/24
- IPv4 Local network(s) : 10.50.99.0/24
My routing table as a client is :
10.8.0.0 255.255.255.0 On-link 10.8.0.2 311
10.8.0.2 255.255.255.255 On-link 10.8.0.2 311
10.8.0.255 255.255.255.255 On-link 10.8.0.2 311
255.255.255.255 255.255.255.255 On-link 10.8.0.2 311
224.0.0.0 240.0.0.0 On-link 10.8.0.2 311In my case, I can ping my own gateway (10.8.0.1) but I can't reach the subnet 10.50.99.0/24. Do you have any idea?
There is no NAT, everything is open in the lan rules.
Thank you
-
Please post the whole routing table.
-
Hi all,
After lots of tries, I haven't found a solution. I'm setting up an openvpn server. My network is :
- LAN interface : 10.50.99.16
- OPT1 : 10.8.0.1
OpenVPN :
- IPv4 Tunnel Network : 10.8.0.0/24
- IPv4 Local network(s) : 10.50.99.0/24
My routing table as a client is :
10.8.0.0 255.255.255.0 On-link 10.8.0.2 311
10.8.0.2 255.255.255.255 On-link 10.8.0.2 311
10.8.0.255 255.255.255.255 On-link 10.8.0.2 311
255.255.255.255 255.255.255.255 On-link 10.8.0.2 311
224.0.0.0 240.0.0.0 On-link 10.8.0.2 311In my case, I can ping my own gateway (10.8.0.1) but I can't reach the subnet 10.50.99.0/24. Do you have any idea?
There is no NAT, everything is open in the lan rules.
Thank you
You need a separate subnet for the "tunnel network"; one that doesn't conflict with your OPT1 subnet.