PPPOE WAN - Bridged DMZ - NAT'd LAN



  • We are using PPPOE on the WAN side getting a static address upon connecting (Typical connection).  The LAN is NAT'd and working fine.  The problem we are having is getting the DMZ to work. It is set in bridging mode and we cannot get packets to route.  We completely removed NAT and tried it with no luck.  We did put in all the rules for the interfaces.  When we check the status of the DMZ int. it says learning.  The thing we are now considering is that in order to use bridging you need a static IP assigned to the WAN int. Is this right?
    Thanks,
    Russ


Log in to reply