OpenVPN problem connect LAN
-
Hi,
I ask for help for configuring OpenVPN PfSense.
My configuration is as follows:
WAN ADSL -> SG-4860 Appliance (default gateway for lan)
I have set up the VPN tunnel, I can connect without problems and ping the network's default gateway.
My problem is that I can not ping the lan hosts.
For example, if I run a ping at 192.168.2.250 (gw) it responds.
If I try a ping or remote desktop connection to a 192.168.2.19 client does not work.What can it be?
Thank you all
tripper
-
Check if the access is blocked by the remote device's firewall. Windows firewalls for instances block access from other subnets by default.
-
Hi,
The client firewall is disabled.
I entered the static route into the client to reach the OpenVPN network and connected.
The question is: why? If I try to create routing configuration on pfsense I can not connect. -
This is only needed if the VPN server is not the default gateway on the client and it does also only make a difference in that case.
But you've mentioned above the pfSense is the default GW in LAN. So one of these must be wrong. -
Ok, problem solved. Client Gateway pointing to another firewall pfsense (I have two).
thank you
tripper