Local app not able to access remote hardware



  • OpenVPN set-up using the Wizard.

    IPV4 Local Network is: 192.168.1.0/24
    IPV4 Tunnel Network is: 192.168.2.0/24

    I can remote into the network over the VPN, and can remote access the router and various equipment using their respecitve web interfaces. For example, an IP cam at 192.168.1.11 works fine

    I have equipment on the network that requires a software application to access, not a web UI. The software allows me to mannually configure the ip address, port, etc for the hardward device. When on the remote network locally, I can acess the device fine. When I try to remote into the network however, the software can not find the device.

    Any suggestions how to resolve this?


Log in to reply