1 WAN & 1 LAN setup needed ?



  • Hi,

    I am behind a firewall and my pfsense setup has only 2 network cards,
    what's the best setup for CP, with the above info.

    please find attach a picture of my network setup:

    I did try this by myself and run into a few problems, even though it work.
    but the problems can not be over look.
    eg:
    DHCP as reaching on the WAN side.
    The LAN side can access machines on the WAN side.

    ![office hotspot.JPG](/public/imported_attachments/1/office hotspot.JPG)
    ![office hotspot.JPG_thumb](/public/imported_attachments/1/office hotspot.JPG_thumb)



  • Ok, I got it to work.

    I did check and twig settings till it work!

    i will upload my config.xml file, but i think the reason it works was that on the firewall->rules tab,
    the '! WAN Address' was not working so I put '! Network' and "192.168.0.1 / 24".
    Now the DHCP is nolonger giving 10.10.10.xxx ip to the pc's on the 192.168.0.1/24 network.

    Thank you.


Log in to reply