2.4.0-BETA shutdown=ok, reboot=fail

motific

I had something similar on different hardware back when I first set up 2.2, it was fixed by a bios update.

darkstargtk

Hi,

I have been running the latest Beta's on some new modern hardware (a Z270 board & i3-7100 CPU).

Whenever the system goes to reboot, it shows the uptime and says rebooting now - but it never does. It requires a hard power off/on. The reboot command fails every time.

The shutdown command from the GUI menu does always work however.

Any ideas?

Same issue for me on an i5-7200U. I believe there is a problem in the way FreeBSD 11.0 handles the ACPI tables for the Kaby Lake chips. This is fixed in 11.1 - once 2.4.1 is released we should be all set. For now I am rebooting the box with 'shutdown -r now' which won't hang the machine on the uptime. This doesn't appear to be an issue on FreeBSD 10.x / pfSense 2.3.x.

spazicus

Thanks for the info ;)

cellobita

I'm having the same issue here - thanks for the tip re: Kaby Lake; I was ready to order a new mobo, but will instead work around the issue until 2.4.1 gets released.

Marcello Marques
Guarujá - SP - Brazil

spazicus

It would be handy if the pfSense updater could issue the command 'shutdown -r now' instead of whatever it is using now.

Then it would reboot correctly after installing updates with Kaby Lake.

olehj

I just posted a feature to include an alternative shutdown in the "buglist"

'shutdown -r now' does indeed work, but I mainly reboot it when I update packages, so must physically reboot it anyway.

Spock75

I have the same problem "Whenever the system goes to reboot, it shows the uptime and says rebooting now - but it never does"

Gigabyte GA-H170N-WIFI
Intel(R) Core(TM) i3-6100T,
pfSense 2.4.0.r.20170910.2058

indigo88

I should mention that I think this is actually a Kabylake PCH issue (200 series chipsets or "Union Point") I have a Skylake CPU in a B250 board and it still has this issue. Not sure if this is an issue with Kabylake CPUs on 100 series chipsets (Sunrise Point)

spazicus

Now FIXED.

2.4.1-DEVELOPMENT (amd64)
built on Tue Sep 19 09:30:30 CDT 2017
FreeBSD 11.1-RELEASE-p1

[2.4.1-DEVELOPMENT][spazicus@pfsense.home]/root: uname -mrs
FreeBSD 11.1-RELEASE-p1 amd64

https://snapshots.pfsense.org/amd64/pfSense_master/installer/

;D

opensrcjunkie

GM….

Assuming you are suggesting updating to 2.4-1 Development...I gave it a shot...No dice...

-Dell Optiplex 990 Tower 8gb Ram/2TB HD(I know Super excessive...too lazy to swap it out), 1 Intel EGPCI NIC 1 TP-Link Gb Pci Link...Worked fine with 2.34...

Just a fyi...and thanks for the info. It was appreciated. 8)

![Picture 1.jpg](/public/imported_attachments/1/Picture 1.jpg)
![Picture 1.jpg_thumb](/public/imported_attachments/1/Picture 1.jpg_thumb)

opensrcjunkie

Duh…Misread your note...

I was up to date with all the revisions...Still no change...

Thanks again

valnar

New 2.41 dev snapshot install dated 29-Sep-2017 on an APU2C4. Same thing. Reboot doesn't work.