LAN + DMZ



  • I am new to PfSense and trying to setup a PfSense box to have a DMZ with no filtering and such for my VoIP phone as I can't get it to work perfectly unless it is exposed to the internet. Tried Siproxd, the settings from the provider, and nothing else worked. Currently I have a switch after my modem which gives a Public IP to my phone and another to my Pfsense. Ideally i would like a DMZ on the PfSense just for the phone and any other devices that I don't want on the same LAN. My PfSense box has 5 Gigabit NIC ports
    1 x Intel CT for WAN (Eth0)
    1 x Intel Quad PT for LAN. Only Eth1 is used for LAN, and I want Eth2 to be the DMZ, and know how to eventually add another LAN on Eth3 & Eth4 as I want a seperate LAN and network for IoT and Security cameras and keep everything as isolated as possible. But the DMZ I only want able to talk to the outside but not the other LAN's. I also want DHCP on them all including the DMZ



  • With that hardware it shouldn't be too hard to get this going.
    What is your question and where in trying to set this up did you struggle?


Log in to reply