Don't upgrade to x86 CE build 2.4.0.r.20171008.0625

josemaX

Same here, BUT if helps to solve i had several IP alias in LAN and they were asigned to LAN and worked to connect.

Then deleted them and unable to configure the IP.

Also in WAN i have static IP and even i configure it, it is not used (in console, IP (WAN and LAN) are blank (in Web cfg (when accessed with one of those aliases) appeared as configured)

Also when configuring in console appears an error about "renaming interfaces", i'll try to take a photo.

Downloading 20171006-1536 to reinstall if no solution given.

Grimson

@Sedorox:

I blew it away (testing VM), and did a fresh install of today's build, and so far everything seems good.

Did you restore you previous config or did you reconfigure by hand?

Are you using the traffic shaper, and if yes do the queues show up in Status -> Queues?

josemaX

Sorry, the error about renaming was when booting, not when configuring IP, attached 2 pictures, one with the renaming error when booting and other after configure LAN IP in console and IPs of interfaces are blank.

booting.jpg_thumb

ConfiguringLANIP.jpg_thumb

Sedorox

@Grimson:

@Sedorox:

I blew it away (testing VM), and did a fresh install of today's build, and so far everything seems good.

Did you restore you previous config or did you reconfigure by hand?

Are you using the traffic shaper, and if yes do the queues show up in Status -> Queues?

No, I did everything from scratch again (only installed about 9:00pm EDT). I didn't have the shaper setup, I did have a few packages (ACME, FRR, Snort, PFBlockerNG), and I believe I went through the real basic setup of Snort and PFBlockerNG. But other than that it was pretty much stock/not configured.

I still have the ISOs from yesterday and I can do some testing to see if I can reproduce it and grab some more screen shots.

Edit: So far I reinstalled with yesterday's build, but it isn't finding anything yet for an update. I'll leave it be for a bit and see what happens.

josemaX

I tried to configure the IPs from shell (console) and default GW and got some connectivity

So:

ifconfig re0 WANIP/Mask
ifconfig rl0 LANIP/Mask
route add default MI_ISP_GW_IP

Gave me some connectivity, i can ping to the Internet (ie: 8.8.8.8 ) BUT no DNS (even configured in Web manager, i had to configure the GW for DNS again)

Now restoring a config over this build (i did a backup yesterday night! ::) ) and will report if solves something

doktornotor

This is superborked and not being able to see the relevant commits on Redmine/GitHub once again does not help here.

Sedorox

See the other thread: https://forum.pfsense.org/index.php?topic=137672.msg752884#msg752884

It's been pulled.

jimp

We're working on a fix right now. A change went in that appears to have broken older package binaries (even base system package binaries) with a newer kernel/world. Once we get a new full pkg set built and tested we'll get a fix out.

In the meantime, installing a current snapshot fresh will work since it all matches. Reinstalling and using the "recover config.xml" option will have you back up with less effort than other solutions.

We have taken the broken package sets down so people can't accidentally upgrade to a broken snapshot.

strangegopher

@jimp:

We have taken the broken package sets down so people can't accidentally upgrade to a broken snapshot.

for some reason I am unable to get to the repository after going to previous snapshot. Is there anyway I can quickly install freeradius package so I get wifi working atleast?

doktornotor

The repos are down apparently ATM.

strangegopher

@doktornotor:

The repos are down apparently ATM.

Thanks. Hope packages are back up soon.

Paint

Yes, my pfSense box got hosed as well. I can't complete my restore since the pkg libraries are down.

Can we restore the latest packages that worked for 2.4.0 while the devs fix the package set?

strangegopher

@Paint:

Yes, my pfSense box got hosed as well. I can't complete my restore since the pkg libraries are down.

Can we restore the latest packages that worked for 2.4.0 while the devs fix the package set?

Yes please restore the packages

edit:

it seems they added .BAD to the end of the repos.

https://firmware.netgate.com/pkg/pfSense_factory-v2_4_0_amd64-core.BAD
https://firmware.netgate.com/pkg/pfSense_factory-v2_4_0_amd64-pfSense_factory-v2_4_0.BAD

Can someone test this /usr/local/etc/pkg/repos/pfSense.conf file?


FreeBSD: { enabled: no }

pfSense-core: {
  url: "pkg+https://pkg.pfsense.org/pfSense_v2_4_0_amd64-core.BAD",
  mirror_type: "srv",
  signature_type: "fingerprints",
  fingerprints: "/usr/local/share/pfSense/keys/pkg",
  enabled: yes
}

pfSense: {
  url: "pkg+https://pkg.pfsense.org/pfSense_v2_4_0_amd64-pfSense_v2_4_0.BAD",
  mirror_type: "srv",
  signature_type: "fingerprints",
  fingerprints: "/usr/local/share/pfSense/keys/pkg",
  enabled: yes
}

edit 2: works!

Guest

I think they are marked BAD for a reason ::)

sgw

@marjohn56:

I think they are marked BAD for a reason ::)

I agree ::)

Could that situation also lead to failing package reinstallation after a fresh install?
I did a fresh install of a RC-snapshot from Oct, 3rd or so (just chose a random one, updates later) and restored my backup xml to it.
Currently it is not able to display available packages or install the packages listed in the XML.
No big deal right now, just reporting and asking to learn things.

Guest

Most likely yes.

Best to leave alone until the repo is back up. If you have killed your system then I would rebuild from one of the downloads that are still available. You may not have packages, but at least you'll get a basic working system, however each to their own.

sgw

@marjohn56:

Most likely yes.

Best to leave alone until the repo is back up. If you have killed your system then I would rebuild from one of the downloads that are still available. You may not have packages, but at least you'll get a basic working system, however each to their own.

Box is up and running, no urgent need for the packages. Thanks.

bcruze

i wish i had read this Friday night before i installed this on my sg2220…

i learned quickly how to console into my box which i never had to do before.

really my main complaint is this. i had made a backup under diagnostics > backup and restore > backup and restore a few months ago to an XML file. when i tried to restore it after i put 2.34 p1 back on i received this :

a full configuration restore was selected but a pfsense tag could not be located. what exactly does that mean?

another sad note, i am running the community version on what i believe is an older version of BSD version 10. is that correct?

Guest

On 2.3.4 Yes. 11.0 is 2.4.0 ( or was/is/maybe ) 11.1 is 2.4.1 ( or was/is/maybe ). It's all a bit variable at the moment depending on how you are leaning.

stephenw10

The current release version of pfSense,2.3.4_1, is built on FreeBSD 10.3.

2.4 snapshots were previously built on FreeBSD 11 but moved to 11.1 when we had to delay release to pull in patches for newly discovered issues.

That applies to factory and CE versions.

https://doc.pfsense.org/index.php/Versions_of_pfSense_and_FreeBSD

If you upgraded to a bad snap and found the result unusable you have a few choices.

You can wait until we get the repos back up after testing the fix we put in which should be very soon. If your firewall still has WAN connectivity you can upgrade from there.

You can restore a 2.4 snap from Oct6th or earlier but because the repos are down you will not be able to install and packages.

You can restore a 2.3.4 image, the repos for 2.3.4 are unaffected so packages will be installed but any config file you restore must be from 2.3.4 or earlier. If you restore a config from 2.4 you may see that sort of error where 2.3.4 does recognise tags in a 2.4 config file. Not everything has changed though.

Steve