Uploadspeed
-
Hallo
Ich versuche gerade mittels Trafficshaper ''alias bzw ip bezogene bandbreitenregeln''' zu erstellen.
Als Basis dazu habe ich einen regel mit dem Wizard erstellt(voip) und nachfolgend einfach die queues
geändert /auf maxbandwith/, diese queues hab ich dann für die jeweilige bandbreite je 1x up +1x down
ertsellt . Die regeln haben dann jeweils mit den aliasen die entsprechenden Queues bekommen.Vom prinzip her sollte das so sein wie schon teilweise im Forum besprochen. Die download speed
begrenzen z.b. auch 1,2,4,6Mbit/sec funktioniert tadelos upload speed begrenzen get leider garnix :-
hab mich erst wenig mit dem shaper beschäftigt ,entweder hab ich was falschverstanden oder falsch
eingerichtet.Setup: beta4 embedded auf wrap sis0= wan sis1 =lan, das wrap hängt hinter einer /pfsense die loabalncer spielt / und soll das captiv portal und das shaping wie oben beschrieben übernemen.
Stefan
-
öhhmm
gaarniemand einen Idee ???
wie gesagt ich gehe davon aus das es grundsätzlich funktionieren sollte 'donwn get ja auch '
da eben nur up sich nicht einbremsen lässt vermute ich mal das ich was falsch macheStefan
-
Poste bitte mal den Trafficshaper-Teil Deiner config.xml.
-
Hmm.. ich hoffe mal ich hab jetzt das was du meintesd
Danke im Voraus :Stefan
- <shaper><schedulertype>hfsc</schedulertype> - <queue><schedulertype><bandwidth>1024</bandwidth> <bandwidthtype>Kb</bandwidthtype> <priority>0</priority> <name>qwanRoot</name> <borrow><linkshare><linkshare3><linkshare2><linkshare1><realtime><realtime3><realtime2><realtime1><upperlimit><upperlimit3><upperlimit2><upperlimit1><parentqueue>on</parentqueue> <attachtoqueue><associatedrule><rio><red><ecn><defaultqueue></defaultqueue></ecn></red></rio></associatedrule></attachtoqueue></upperlimit1></upperlimit2></upperlimit3></upperlimit></realtime1></realtime2></realtime3></realtime></linkshare1></linkshare2></linkshare3></linkshare></borrow></schedulertype></queue> - <queue><schedulertype><bandwidth>16000</bandwidth> <bandwidthtype>Kb</bandwidthtype> <priority>0</priority> <name>qlanRoot</name> <borrow><linkshare><linkshare3><linkshare2><linkshare1><realtime><realtime3><realtime2><realtime1><upperlimit><upperlimit3><upperlimit2><upperlimit1><parentqueue>on</parentqueue> <attachtoqueue><associatedrule><rio><red><ecn><defaultqueue></defaultqueue></ecn></red></rio></associatedrule></attachtoqueue></upperlimit1></upperlimit2></upperlimit3></upperlimit></realtime1></realtime2></realtime3></realtime></linkshare1></linkshare2></linkshare3></linkshare></borrow></schedulertype></queue> - <queue><name>qwandef</name> <attachtoqueue>qwanRoot</attachtoqueue> <associatedrule>0</associatedrule> <defaultqueue>true</defaultqueue> <priority>3</priority> <realtime>on</realtime> <realtime3>1%</realtime3> <bandwidth>1</bandwidth> <bandwidthtype>%</bandwidthtype> <qlimit>500</qlimit></queue> - <queue><name>qlandef</name> <priority>3</priority> <attachtoqueue>qlanRoot</attachtoqueue> <associatedrule>0</associatedrule> <defaultqueue>true</defaultqueue> <realtime>on</realtime> <realtime3>1%</realtime3> <bandwidth>1</bandwidth> <bandwidthtype>%</bandwidthtype> <qlimit>500</qlimit></queue> - <queue><name>qwanacks</name> <ack><attachtoqueue>qwanRoot</attachtoqueue> <associatedrule>0</associatedrule> <priority>7</priority> <realtime>on</realtime> <realtime3>10%</realtime3> <bandwidth>1</bandwidth> <bandwidthtype>%</bandwidthtype></ack></queue> - <queue><name>qlanacks</name> <ack><attachtoqueue>qlanRoot</attachtoqueue> <associatedrule>0</associatedrule> <priority>7</priority> <realtime>on</realtime> <realtime3>10%</realtime3> <bandwidth>1</bandwidth> <bandwidthtype>%</bandwidthtype></ack></queue> - <queue><schedulertype><bandwidth>1</bandwidth> <bandwidthtype>%</bandwidthtype> <priority>7</priority> <name>qVOIPUp</name> <borrow><linkshare><linkshare3><linkshare2><linkshare1><realtime><realtime3><realtime2><realtime1><upperlimit>on</upperlimit> <upperlimit3>127Kb</upperlimit3> <upperlimit2><upperlimit1><parentqueue><attachtoqueue>qwanRoot</attachtoqueue> <associatedrule><rio><red><ecn><defaultqueue></defaultqueue></ecn></red></rio></associatedrule></parentqueue></upperlimit1></upperlimit2></realtime1></realtime2></realtime3></realtime></linkshare1></linkshare2></linkshare3></linkshare></borrow></schedulertype></queue> - <queue><schedulertype><bandwidth>1</bandwidth> <bandwidthtype>%</bandwidthtype> <priority>7</priority> <name>qVOIPDown</name> <borrow><linkshare><linkshare3><linkshare2><linkshare1><realtime><realtime3><realtime2><realtime1><upperlimit>on</upperlimit> <upperlimit3>512Kb</upperlimit3> <upperlimit2><upperlimit1><parentqueue><attachtoqueue>qlanRoot</attachtoqueue> <associatedrule><rio><red><ecn><defaultqueue></defaultqueue></ecn></red></rio></associatedrule></parentqueue></upperlimit1></upperlimit2></realtime1></realtime2></realtime3></realtime></linkshare1></linkshare2></linkshare3></linkshare></borrow></schedulertype></queue> - <queue><schedulertype><bandwidth>1</bandwidth> <bandwidthtype>%</bandwidthtype> <priority>7</priority> <name>basicup</name> <borrow><linkshare><linkshare3><linkshare2><linkshare1><realtime><realtime3><realtime2><realtime1><upperlimit>on</upperlimit> <upperlimit3>128Kb</upperlimit3> <upperlimit2><upperlimit1><parentqueue><attachtoqueue>qwanRoot</attachtoqueue> <associatedrule><rio><red><ecn><defaultqueue></defaultqueue></ecn></red></rio></associatedrule></parentqueue></upperlimit1></upperlimit2></realtime1></realtime2></realtime3></realtime></linkshare1></linkshare2></linkshare3></linkshare></borrow></schedulertype></queue> - <queue><schedulertype><bandwidth>1</bandwidth> <bandwidthtype>%</bandwidthtype> <priority>7</priority> <name>basicdown</name> <borrow><linkshare><linkshare3><linkshare2><linkshare1><realtime><realtime3><realtime2><realtime1><upperlimit>on</upperlimit> <upperlimit3>1100Kb</upperlimit3> <upperlimit2><upperlimit1><parentqueue><attachtoqueue>qlanRoot</attachtoqueue> <associatedrule><rio><red><ecn><defaultqueue></defaultqueue></ecn></red></rio></associatedrule></parentqueue></upperlimit1></upperlimit2></realtime1></realtime2></realtime3></realtime></linkshare1></linkshare2></linkshare3></linkshare></borrow></schedulertype></queue> - <queue><schedulertype><bandwidth>1</bandwidth> <bandwidthtype>%</bandwidthtype> <priority>6</priority> <name>Homeup</name> <borrow><linkshare><linkshare3><linkshare2><linkshare1><realtime><realtime3><realtime2><realtime1><upperlimit>on</upperlimit> <upperlimit3>256Kb</upperlimit3> <upperlimit2><upperlimit1><parentqueue><attachtoqueue>qwanRoot</attachtoqueue> <associatedrule><rio><red><ecn><defaultqueue></defaultqueue></ecn></red></rio></associatedrule></parentqueue></upperlimit1></upperlimit2></realtime1></realtime2></realtime3></realtime></linkshare1></linkshare2></linkshare3></linkshare></borrow></schedulertype></queue> - <queue><schedulertype><bandwidth>1</bandwidth> <bandwidthtype>%</bandwidthtype> <priority>6</priority> <name>Homedown</name> <borrow><linkshare><linkshare3><linkshare2><linkshare1><realtime><realtime3><realtime2><realtime1><upperlimit>on</upperlimit> <upperlimit3>2200Kb</upperlimit3> <upperlimit2><upperlimit1><parentqueue><attachtoqueue>qlanRoot</attachtoqueue> <associatedrule><rio><red><ecn><defaultqueue></defaultqueue></ecn></red></rio></associatedrule></parentqueue></upperlimit1></upperlimit2></realtime1></realtime2></realtime3></realtime></linkshare1></linkshare2></linkshare3></linkshare></borrow></schedulertype></queue> - <queue><schedulertype><bandwidth>1</bandwidth> <bandwidthtype>%</bandwidthtype> <priority>5</priority> <name>Proup</name> <borrow><linkshare><linkshare3><linkshare2><linkshare1><realtime><realtime3><realtime2><realtime1><upperlimit>on</upperlimit> <upperlimit3>396Kb</upperlimit3> <upperlimit2><upperlimit1><parentqueue><attachtoqueue>qwanRoot</attachtoqueue> <associatedrule><rio><red><ecn><defaultqueue></defaultqueue></ecn></red></rio></associatedrule></parentqueue></upperlimit1></upperlimit2></realtime1></realtime2></realtime3></realtime></linkshare1></linkshare2></linkshare3></linkshare></borrow></schedulertype></queue> - <queue><schedulertype><bandwidth>1</bandwidth> <bandwidthtype>%</bandwidthtype> <priority>5</priority> <name>Prodown</name> <borrow><linkshare><linkshare3><linkshare2><linkshare1><realtime><realtime3><realtime2><realtime1><upperlimit>on</upperlimit> <upperlimit3>4300Kb</upperlimit3> <upperlimit2><upperlimit1><parentqueue><attachtoqueue>qlanRoot</attachtoqueue> <associatedrule><rio><red><ecn><defaultqueue></defaultqueue></ecn></red></rio></associatedrule></parentqueue></upperlimit1></upperlimit2></realtime1></realtime2></realtime3></realtime></linkshare1></linkshare2></linkshare3></linkshare></borrow></schedulertype></queue> - <queue><schedulertype><bandwidth>1</bandwidth> <bandwidthtype>%</bandwidthtype> <priority>5</priority> <name>Premiumup</name> <borrow><linkshare><linkshare3><linkshare2><linkshare1><realtime><realtime3><realtime2><realtime1><upperlimit>on</upperlimit> <upperlimit3>512Kb</upperlimit3> <upperlimit2><upperlimit1><parentqueue><attachtoqueue>qwanRoot</attachtoqueue> <associatedrule><rio><red><ecn><defaultqueue></defaultqueue></ecn></red></rio></associatedrule></parentqueue></upperlimit1></upperlimit2></realtime1></realtime2></realtime3></realtime></linkshare1></linkshare2></linkshare3></linkshare></borrow></schedulertype></queue> - <queue><schedulertype><bandwidth>1</bandwidth> <bandwidthtype>%</bandwidthtype> <priority>4</priority> <name>Premiumdown</name> <borrow><linkshare><linkshare3><linkshare2><linkshare1><realtime><realtime3><realtime2><realtime1><upperlimit>on</upperlimit> <upperlimit3>6100Kb</upperlimit3> <upperlimit2><upperlimit1><parentqueue><attachtoqueue>qlanRoot</attachtoqueue> <associatedrule><rio><red><ecn><defaultqueue></defaultqueue></ecn></red></rio></associatedrule></parentqueue></upperlimit1></upperlimit2></realtime1></realtime2></realtime3></realtime></linkshare1></linkshare2></linkshare3></linkshare></borrow></schedulertype></queue> - <rule><in-interface>wan</in-interface> <out-interface>lan</out-interface> - <source> <any>- <destination><address>10.10.1.3</address></destination> <direction>in</direction> <iptos><tcpflags><descr>VOIP Adapter</descr> <inqueue>qVOIPUp</inqueue> <outqueue>qVOIPDown</outqueue></tcpflags></iptos></any></rule> - <rule><in-interface>lan</in-interface> <out-interface>wan</out-interface> - <source> <address>10.10.1.3</address> - <destination><any></any></destination> <direction>out</direction> <iptos><tcpflags><descr>VOIP Adapter</descr> <inqueue>qVOIPDown</inqueue> <outqueue>qVOIPUp</outqueue></tcpflags></iptos></rule> - <rule><in-interface>wan</in-interface> <out-interface>lan</out-interface> - <source> <any>- <destination><address>Premium</address></destination> <direction>in</direction> <iptos><tcpflags><descr>VOIP Adapter</descr> <inqueue>Premiumup</inqueue> <outqueue>Premiumdown</outqueue></tcpflags></iptos></any></rule> - <rule><in-interface>lan</in-interface> <out-interface>wan</out-interface> - <source> <address>Premium</address> - <destination><any></any></destination> <direction>out</direction> <iptos><tcpflags><descr>VOIP Adapter</descr> <inqueue>Premiumdown</inqueue> <outqueue>Premiumup</outqueue></tcpflags></iptos></rule> - <rule><in-interface>wan</in-interface> <out-interface>lan</out-interface> - <source> <any>- <destination><address>Pro</address></destination> <direction>in</direction> <iptos><tcpflags><descr>VOIP Adapter</descr> <inqueue>Proup</inqueue> <outqueue>Prodown</outqueue></tcpflags></iptos></any></rule> - <rule><in-interface>lan</in-interface> <out-interface>wan</out-interface> - <source> <address>Pro</address> - <destination><any></any></destination> <direction>out</direction> <iptos><tcpflags><descr>VOIP Adapter</descr> <inqueue>Prodown</inqueue> <outqueue>Proup</outqueue></tcpflags></iptos></rule> - <rule><in-interface>wan</in-interface> <out-interface>lan</out-interface> - <source> <any>- <destination><address>Home</address></destination> <direction>in</direction> <iptos><tcpflags><descr>VOIP Adapter</descr> <inqueue>Homeup</inqueue> <outqueue>Homedown</outqueue></tcpflags></iptos></any></rule> - <rule><in-interface>lan</in-interface> <out-interface>wan</out-interface> - <source> <address>Home</address> - <destination><any></any></destination> <direction>out</direction> <iptos><tcpflags><descr>VOIP Adapter</descr> <inqueue>Homedown</inqueue> <outqueue>Homeup</outqueue></tcpflags></iptos></rule> - <rule><in-interface>wan</in-interface> <out-interface>lan</out-interface> - <source> <any>- <destination><address>basic</address></destination> <direction>in</direction> <iptos><tcpflags><descr>VOIP Adapter</descr> <inqueue>basicup</inqueue> <outqueue>basicdown</outqueue></tcpflags></iptos></any></rule> - <rule><in-interface>lan</in-interface> <out-interface>wan</out-interface> - <source> <address>basic</address> - <destination><any></any></destination> <direction>out</direction> <iptos><tcpflags><descr>VOIP Adapter</descr> <inqueue>basicdown</inqueue> <outqueue>basicup</outqueue></tcpflags></iptos></rule> <enable></enable></shaper>
-
Ok, wir bräuchten nochmal die Datei /tmp/rules.debug (kannst Du über das webgui unter diagnostics>edit file öffnen und copy/pasten).
-
Müsste das hier sein …..
Gruss Stefan
# System Aliases loopback = "{ lo0 }" lan = "{ sis0 }" wan = "{ sis1 ng0 }" # User Aliases Home = "{ 10.10.1.70 10.10.1.71 10.10.1.72 10.10.1.73 10.10.1.74 10.10.1.75 10.10.1.76 10.10.1.77 10.10.1.78 10.10.1.79 10.10.1.80 }" Premium = "{ 10.10.1.100 10.10.1.101 10.10.1.102 10.10.1.103 10.10.1.104 10.10.1.105 10.10.1.106 10.10.1.107 10.10.1.108 10.10.1.109 }" Pro = "{ 10.10.1.90 10.10.1.91 10.10.1.92 10.10.1.93 10.10.1.94 10.10.1.95 10.10.1.96 10.10.1.97 10.10.1.98 10.10.1.99 }" basic = "{ 10.10.1.50 10.10.1.51 10.10.1.52 10.10.1.53 10.10.1.54 10.10.1.55 10.10.1.56 10.10.1.57 10.10.1.59 10.10.1.58 192.168.100.100 }" set loginterface sis1 set loginterface sis0 set optimization normal scrub on sis1 all random-id altq on sis1 hfsc bandwidth 1024Kb queue { qwanRoot } altq on sis0 hfsc bandwidth 16000Kb queue { qlanRoot } queue qwanRoot bandwidth 1024Kb priority 0 hfsc { qwandef, qwanacks, qVOIPUp, basicup, Homeup, Proup, Premiumup } queue qlanRoot bandwidth 16000Kb priority 0 hfsc { qlandef, qlanacks, qVOIPDown, basicdown, Homedown, Prodown, Premiumdown } queue qwandef bandwidth 1% priority 3 qlimit 500 hfsc ( default realtime 1% ) queue qlandef bandwidth 1% priority 3 qlimit 500 hfsc ( default realtime 1% ) queue qwanacks bandwidth 1% priority 7 hfsc ( realtime 10% ) queue qlanacks bandwidth 1% priority 7 hfsc ( realtime 10% ) queue qVOIPUp bandwidth 1% priority 7 hfsc ( upperlimit 127Kb ) queue qVOIPDown bandwidth 1% priority 7 hfsc ( upperlimit 512Kb ) queue basicup bandwidth 1% priority 7 hfsc ( upperlimit 128Kb ) queue basicdown bandwidth 1% priority 7 hfsc ( upperlimit 1100Kb ) queue Homeup bandwidth 1% priority 6 hfsc ( upperlimit 256Kb ) queue Homedown bandwidth 1% priority 6 hfsc ( upperlimit 2200Kb ) queue Proup bandwidth 1% priority 5 hfsc ( upperlimit 396Kb ) queue Prodown bandwidth 1% priority 5 hfsc ( upperlimit 4300Kb ) queue Premiumup bandwidth 1% priority 5 hfsc ( upperlimit 512Kb ) queue Premiumdown bandwidth 1% priority 4 hfsc ( upperlimit 6100Kb ) # UPnPd rdr anchor rdr-anchor "upnpd/*" nat-anchor "pftpx/*" nat-anchor "natearly/*" nat-anchor "natrules/*" # FTP proxy rdr-anchor "pftpx/*" nat on $wan from 10.10.1.0/24 port 500 to any port 500 -> (sis1) port 500 nat on $wan from 10.10.1.0/24 to any -> (sis1) #SSH Lockout Table table <sshlockout>persist # Load balancing anchor - slbd updates rdr-anchor "slb" # FTP Proxy/helper rdr on $lan proto tcp from any to any port 21 -> 127.0.0.1 port 8021 block in all tag unshaped label "SHAPER: first match rule" pass in on $wan from any to 10.10.1.3 keep state tagged unshaped tag qVOIPUp pass out on $lan from any to 10.10.1.3 keep state tagged qVOIPUp tag qVOIPDown pass in on $lan from 10.10.1.3 to any keep state tagged unshaped tag qVOIPDown pass out on $wan from any to any keep state tagged qVOIPDown tag qVOIPUp pass in on $wan from any to $Premium keep state tagged unshaped tag Premiumup pass out on $lan from any to $Premium keep state tagged Premiumup tag Premiumdown pass in on $lan from $Premium to any keep state tagged unshaped tag Premiumdown pass out on $wan from any to any keep state tagged Premiumdown tag Premiumup pass in on $wan from any to $Pro keep state tagged unshaped tag Proup pass out on $lan from any to $Pro keep state tagged Proup tag Prodown pass in on $lan from $Pro to any keep state tagged unshaped tag Prodown pass out on $wan from any to any keep state tagged Prodown tag Proup pass in on $wan from any to $Home keep state tagged unshaped tag Homeup pass out on $lan from any to $Home keep state tagged Homeup tag Homedown pass in on $lan from $Home to any keep state tagged unshaped tag Homedown pass out on $wan from any to any keep state tagged Homedown tag Homeup pass in on $wan from any to $basic keep state tagged unshaped tag basicup pass out on $lan from any to $basic keep state tagged basicup tag basicdown pass in on $lan from $basic to any keep state tagged unshaped tag basicdown pass out on $wan from any to any keep state tagged basicdown tag basicup anchor "ftpsesame/*" anchor "firewallrules" # loopback anchor "loopback" pass in quick on $loopback all label "pass loopback" pass out quick on $loopback all label "pass loopback" # package manager early specific hook anchor "packageearly" # carp anchor "carp" # enable ftp-proxy anchor "ftpproxy" anchor "pftpx/*" pass in quick on sis0 inet proto tcp from any to $loopback port 8021 keep state label "FTP PROXY: Allow traffic to localhost" pass in quick on sis0 inet proto tcp from any to $loopback port 21 keep state label "FTP PROXY: Allow traffic to localhost" pass in quick on sis1 inet proto tcp from port 20 to (sis1) port > 49000 user proxy flags S/SA keep state label "FTP PROXY: PASV mode data connection" # allow access to DHCP server on LAN anchor "dhcpserverlan" pass in quick on $lan proto udp from any port = 68 to 255.255.255.255 port = 67 label "allow access to DHCP server on LAN" pass in quick on $lan proto udp from any port = 68 to 10.10.1.1 port = 67 label "allow access to DHCP server on LAN" pass out quick on $lan proto udp from 10.10.1.1 port = 67 to any port = 68 label "allow access to DHCP server on LAN" # allow our DHCP client out to the WAN anchor "wandhcp" pass out quick on $wan proto udp from any port = 68 to any port = 67 label "allow dhcp client out wan" block in log quick on $wan proto udp from any port = 67 to 10.10.1.0/24 port = 68 label "allow dhcp client out wan" pass in quick on $wan proto udp from any port = 67 to any port = 68 label "allow dhcp client out wan" # LAN/OPT spoof check (needs to be after DHCP because of broadcast addresses) antispoof for sis0 # Support for allow limiting of TCP connections by establishment rate anchor "limitingesr" table <virusprot>block in quick from <virusprot>to any label "virusprot overload table" # let out anything from the firewall host itself and decrypted IPsec traffic pass out quick on sis1 all keep state label "let out anything from firewall host itself" # pass traffic from firewall -> out anchor "firewallout" pass out quick on sis1 all keep state tagged qVOIPUp queue (qVOIPUp, qwanacks) label "let out anything from firewall host itself" pass out quick on sis1 all keep state tagged basicup queue (basicup, qwanacks) label "let out anything from firewall host itself" pass out quick on sis1 all keep state tagged Homeup queue (Homeup, qwanacks) label "let out anything from firewall host itself" pass out quick on sis1 all keep state tagged Proup queue (Proup, qwanacks) label "let out anything from firewall host itself" pass out quick on sis1 all keep state tagged Premiumup queue (Premiumup, qwanacks) label "let out anything from firewall host itself" pass out quick on sis1 all keep state queue (qwandef, qwanacks) label "let out anything from firewall host itself" pass out quick on sis0 all keep state tagged qVOIPDown queue (qVOIPDown, qlanacks) label "let out anything from firewall host itself" pass out quick on sis0 all keep state tagged basicdown queue (basicdown, qlanacks) label "let out anything from firewall host itself" pass out quick on sis0 all keep state tagged Homedown queue (Homedown, qlanacks) label "let out anything from firewall host itself" pass out quick on sis0 all keep state tagged Prodown queue (Prodown, qlanacks) label "let out anything from firewall host itself" pass out quick on sis0 all keep state tagged Premiumdown queue (Premiumdown, qlanacks) label "let out anything from firewall host itself" pass out quick on sis0 all keep state queue (qlandef, qlanacks) label "let out anything from firewall host itself" # make sure the user cannot lock himself out of the webGUI or SSH anchor "anti-lockout" pass in quick from 10.10.1.0/24 to 10.10.1.1 keep state label "anti-lockout web rule" # SSH lockout block in log proto tcp from <sshlockout>to any port 22 label "sshlockout" # User-defined rules follow # Anchors for rules that might be matched by queues anchor qwanRoot tagged qwanRoot anchor qlanRoot tagged qlanRoot anchor qwandef tagged qwandef anchor qlandef tagged qlandef anchor qwanacks tagged qwanacks anchor qlanacks tagged qlanacks anchor qVOIPUp tagged qVOIPUp anchor qVOIPDown tagged qVOIPDown anchor basicup tagged basicup anchor basicdown tagged basicdown anchor Homeup tagged Homeup anchor Homedown tagged Homedown anchor Proup tagged Proup anchor Prodown tagged Prodown anchor Premiumup tagged Premiumup anchor Premiumdown tagged Premiumdown pass in quick on $wan from any to any keep state queue (qwandef, qwanacks) label "USER_RULE" # opt2 array key does not exist for label "USER_RULE" pass in quick on $lan from 10.10.1.0/24 to any keep state queue (qlandef, qlanacks) label "USER_RULE: Default LAN -> any" # VPN Rules #--------------------------------------------------------------------------- # default rules (just to be sure) #--------------------------------------------------------------------------- block in log quick all label "Default block all just to be sure." block out log quick all label "Default block all just to be sure."</sshlockout></virusprot></virusprot></sshlockout>
-
Ok, Fehler gefunden. Bill arbeitet an der Behebung. Ich gebe Dir bescheid, wenn es was zu testen gibt. Der Fehler tritt übrigens nur mit PPPoE WAN auf.
-
hallo sorry für die späte Antwort
danke erstmal für deine hilfe
Der Fehler tritt übrigens nur mit PPPoE WAN auf.
hmm… diese sense is wie erwähnt einer anderen sense nachgeschaltet und ist Wanseitig als dhcpclient eingestellt
Grund dafür ist das meinen pfsense mit loadbalancer kein Captivportal mehr kann .
aber gut mal sehen was dabei rauskommtMfg: Stefan