Error message I can't figure out
-
Setup openvpn using the wizard on v. 2.4.2 like I normally do. There is a separate internal CA with associated server and user certificates. I checked the boxes for the wizard to create the firewall rules.
Tested and can't connect.
This is the following error message in the openvpn logs: openvpn 9535 (source ip address) write UDPv6: Permission denied (code=13)
IPv6 is disabled for both WAN and LAN.
I checked this config against a working config and I can't find any differences. I'm wondering where I screwed up
-
Turns out that I got the wrong gateway ip from the ISP. Figured it out, changed the gateway info in pfsense and all was well.
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.