Factorio Headless Server Connection
Tried many options on getting to connect to server, connection time out, ports are closed, tried opening them..anyways this is my setup,
Have pFsense with open vpn client running on a dedicated computer ip = 192.168.1.1, vpn client = Private Internet Access (PIA)
The Factorio headless server is running on another dedicated computer ip = 192.168.1.10 ports that are used for this server is 34291:34299
I have tried making aliases, for wan/lan and openvpn, created 1 at a time, made sure it was the 2nd rule in the wan side/lan /openvpn,
every time i tried an option i checked to see if my ports where open to see if i could connect to server or a friend was able to connect to server,
we can see the server but we get the following error….couldn't establish network communication with server
I have watched videos from youtube, to reading the forums and I still get a big connection error, I know i'm doing something wrong, i just need a little direction... :)
Thank you in advance for all the help, if any info missing please feel free to ask.
This is a simple UDP port forward that is needed..
Your problem prob is that your sending all your return traffic out your vpn when the connection comes in your wan.. Turn off your vpn client and work on your problem of port forwarding.
Once you have it working - then turn your vpn client back on but don't use default routing out your vpn, use policy routing for what you want to send out the vpn, or what you want to go out your normal wan like your return traffic for your game server to clients.
Also are you trying to access the game as well via nat reflection?
This is what i have done so far,
1. disableble OpenVpn
2. Created an alias for the ports 34291:34299 (TCP/UPD) (alias= Factory)
3. Nat setting , interface = wan, protocol = tcp/udp, destination = any, destination ports = factory, redirect ip = 192.168.1.10 (factory Server), redirect target port = factory
4. Firewall rule = first one on top.
my connection is a wan PPPOE connection.
question my wan interface address says one thing and wan PPPoe say somethign different….example wan interface = 188.8.131.52, Wan PPPOE = 184.108.40.206
Using a Bell Router Hub 2000 disable all functions (wireless, login into account,dhcp ...) everything is done threw pfsense (dhcp, wireless .....
So you do not need tcp - this off their own site saying they only use UDP.. Where did you get those ports from? I would suggest you start with 1.. get that working before you start working on ranges your trying to forward..
If your using a PPPoE connection that would be where your inbound traffic would hit. You need to go through the troubleshooting guide linked too.. Where does it fail - do you see the inbound traffic on your internet site interface? Simple sniff will show this.. Do you see pfsense send on the traffic to the IP your wanting to forward too, etc.
The part that is missing is the outbound NAT. The Factorio server is a client to the factorio pingpong servers that are used for NAT punching(1). The source ports when talking to these pingpong servers must not be mangled, so an outbound NAT rules is needed to prevent this (PFSense mangles ports by default). Just got all this working today.
Outbound NAT Mode: Hybrid Outbound
Add this mapping:
Source: <internal address="" of="" your="" server="">Source Port: udp/34197
Destination Port: udp/*
NAT Port: *
Static Port: YES