Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    UDP Port problems

    Gaming
    2
    5
    1.2k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M
      mibtech
      last edited by

      Hello,

      I am looking for some assistance with troubleshooting an issue with udp ports not appearing to open.

      I am running a game server on a vmware windows 2003 server the port it requires is 2302 udp.

      netstat info from windows 2003  UDP [fe80::5efe:192.168.1.11%2]:2302      :
                                                      UDP [fe80::ffff:ffff:fffd%4]                          :

      I have created a nat rule that has also created the firewall rule

      I have also tried many port checkers and none shows the port open.

      The game server is visible and usable on the LAN but not visible on the Internet.

      I have also gone through the troubleshooting guide but I could not find anything in the guide that would solve this problem.

      Any troubleshooting steps to try next are appreciated.

      ![udp rule.png](/public/imported_attachments/1/udp rule.png)
      ![udp rule.png_thumb](/public/imported_attachments/1/udp rule.png_thumb)

      1 Reply Last reply Reply Quote 0
      • KOMK
        KOM
        last edited by

        I am running a game server on a vmware windows 2003 server

        Seriously???

        Any troubleshooting steps to try next are appreciated.

        Use Diagnostics - Packet Capture to sniff your WAN and LAN to see how that traffic is entering the system and what happens to it.  I suspect that the game requires more than just 2302/udp.  If the game you're running is Freelancer (FLServ) then you need 2302-2304/udp, not just 2302/udp.

        1 Reply Last reply Reply Quote 0
        • M
          mibtech
          last edited by

          you are correct the main udp port it requires is 2302 but many sites recommend 2300:2400 so I have changed it.

          Lan to the ip packet capture

          17:25:32.966835 IP (tos 0x0, ttl 128, id 31987, offset 0, flags [none], proto UDP (17), length 44)
              192.168.1.11.4114 > 5.9.69.107.2300: [udp sum ok] UDP, length 16

          when I try Wan to the ip the packet capture is empty

          1 Reply Last reply Reply Quote 0
          • KOMK
            KOM
            last edited by

            but many sites recommend

            This game can't tell you exactly what it needs, and you have to go by what gaming sites think it needs????  You're never going to get this right if you don't know what's required and have to guess.  Go to their main site and check their Support section for network details such as exactly which ports you need to forward.

            when I try Wan to the ip the packet capture is empty

            Then you're doing something wrong.  You should be seeing udp traffic destined for your WAN IP.

            1 Reply Last reply Reply Quote 0
            • M
              mibtech
              last edited by

              I have gone straight to the manual on the disc I have the correct ports.

              1 Reply Last reply Reply Quote 0
              • First post
                Last post
              Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.