Pfsense安裝當機
-
Platform: Denverton C3308
SSD 128G
Console OS: pfSense-CE-memstick-serial-2.4.2-RELEASE-amd64.img.gz將上述OS燒錄Transcend USB2.0 16G
於安裝時會遇到以下情況uhub0: 8 ports with 8 removable, self powered
ugen0.2: <jetflash mass="" storage="" device="">at usbus0
umass0 on uhub0
umass0: <jetflash 0="" 1="" mass="" storage="" device,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usbus0
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <jetflash transcend="" 16gb="" 8.01="">Removable Direct Access SCSI-2 device
da0: Serial Number 4FXBZM9J
da0: 40.000MB/s transfers
da0: 15308MB (31352820 512 byte sectors)
da0: quirks=0x12 <no_6_byte,no_rc16>ses0 at ahciem0 bus 0 scbus1 target 0 lun 0
ses0: <ahci sgpio="" enclosure="" 1.00="" 0001="">SEMB S-E-S 2.00 device
ses0: SEMB SES Device
cd0 at umass-sim0 bus 0 scbus2 target 0 lun 1
cd0: <generic autorun="" disk="" 8.00="">Removable CD-ROM SCSI-2 device
cd0: Serial Number 4FXBZM9J
cd0: 40.000MB/s transfers
cd0: 11MB (22540 512 byte sectors)
cd0: quirks=0x10<10_BYTE_ONLY>
Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]…
/etc/rc: WARNINGrandom: unblocking device.console畫面會於
Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]…
/etc/rc: WARNINGrandom: unblocking device.
後停止任何動作但假如我採用VGA版本之OS卻又可以正常執行
VGA OS: pfSense-CE-memstick-2.4.2-RELEASE-amd64.img.gz已查詢過相關文章:
https://doc.pfsense.org/index.php/Boot_Troubleshooting
https://utech2.wordpress.com/2016/08/24/install-pfsense-get-error/
http://minnowboard.57273.x6.nabble.com/MinnowBoard-Unable-to-Boot-Install-pfSense-td2364.html嘗試過許多方法也試過於boot時set kern.cam.boot_delay="10000"
但都沒有任何幫助，想請問各位能否有其他建議?</generic></ahci></no_6_byte,no_rc16></jetflash></jetflash></jetflash>