Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Network Jumps Pf Sense with OpenVpn

    Scheduled Pinned Locked Moved OpenVPN
    2 Posts 2 Posters 347 Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • A
      AvelardoJC
      last edited by

      Hello dears,

      I thank you for guiding me a bit about a problem I have, the subject is the following:

      I made a vpn of 3 sites to a remote office using openvpn as a tool, the network segments are like this:

      10.0.3.0/24 - PF Sense Central
      10.0.4.0/24 - PF Sense site 1
      10.0.5.0/24 - PF Sense site 2
      10.0.6.0/24 - PF Sense site 3

      Each site towards the central PF Sense has communication and from the central to any site as well, my doubt is there is some configuration that allows me to make a jump between the segments?

      For example, ping 10.0.4.1 to 10.0.5.1 and respond

      The vpn is by peer to peer (shared key)

      1 Reply Last reply Reply Quote 0
      • DerelictD
        Derelict LAYER 8 Netgate
        last edited by

        You need to:

        • add all of the remote networks each site should be able to access to the Remote Networks at those sites

        • be sure the OpenVPN firewall rules pass the necessary traffic into each firewall

        Chattanooga, Tennessee, USA
        A comprehensive network diagram is worth 10,000 words and 15 conference calls.
        DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
        Do Not Chat For Help! NO_WAN_EGRESS(TM)

        1 Reply Last reply Reply Quote 0
        • First post
          Last post
        Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.