Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    PPPoE WAN fails to reconnect after link loss

    Scheduled Pinned Locked Moved
    General pfSense Questions
    7
    60
    10.7k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • V
      vegbrasil
      last edited by vegbrasil

      @stephenw10 Sorry for the delay. Unfortunately, the problem persists.

      Here's what I've done since then:

      • Updated to 2.4.3p1;
      • Fixed the authorized MAC address with my ISP. There's no spoofing anymore;
      • Recreated the PPPoE interface from scratch;
      • Tried another network port in the same machine;
      • Used PPPoE with the same ISP but different layer 1 topology. Reconnection works fine when using their wireless uplink. The problem only happens on the FTTH connection;

      Is there anything else I can do?

      Thanks!

      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        Hmm, the logs still show the same thing? Can we see a current PPP log showing the failure?

        Steve

        V 1 Reply Last reply Reply Quote 0
        • V
          vegbrasil @stephenw10
          last edited by

          @stephenw10 Here's the updated logs. For safety, I've replaced the WAN IP with $_WAN_PUBLIC_IP_$ and my ISP's gateway with $_ISP_GATEWAY_$.

          Log #1 - Connection works after system restart

          Log #2 - Fails to reconnect if the connection dropped for any reason

          This line keeps appearing:

          IFACE: Adding IPv4 address to pppoe2 failed(IGNORING for now. This should be only for PPPoE friendly!): File exists

          Thanks!

          1 Reply Last reply Reply Quote 0
          • J
            Joxxxx
            last edited by

            Hello, did you find out what was the problem ? Because I have the exact same problem with the exact same errors after upgrading to 2.4.4 .

            [opt1] IFACE: Adding IPv4 address to pppoe0 failed(IGNORING for now. This should be only for PPPoE friendly!): File exists 

            [opt1] IFACE: Removing IPv4 address from pppoe0 failed(IGNORING for now. This should be only for PPPoE friendly!): Can't assign requested address

            Tried everything, nothing helps. The connection works on VyOS and directly on the PC.

            V 1 Reply Last reply Reply Quote 1
            • V
              vegbrasil @Joxxxx
              last edited by

              @joxxxx I have yet to find a solution. For me, the (re)connection works fine on other OSes and devices as well.

              Let me know you find out anything. Unfortunately I'm considering migrating to something else.

              J 1 Reply Last reply Reply Quote 1
              • J
                Joxxxx @vegbrasil
                last edited by

                @vegbrasil After countless hours, I found out that the pppoe layer of pfsense 2.4.4 is bugged ! Something changed and because of that, the connection cannot be made with the above errors. Tried it also on a clean 2.4.4 install.

                Re-installed 2.4.3 and all works again without any problems ! The thing is that I cannot install any packages anymore because it wants me to update to 2.4.4...

                Btw, tried the dev 2.4.5 version and the bug is still the same.

                I hope this will be fixed because it mus affect a lot of people...

                1 Reply Last reply Reply Quote 0
                • stephenw10S
                  stephenw10 Netgate Administrator
                  last edited by

                  Hmm, there must be something different about your connection. I have two WANs here, both are PPPoE. The only issue I saw was when the ISP(s) had an outage. However the logs showed it as very broken, nothing like what you're seeing.
                  If PPPoE was broken in general there would be hundreds of posts about it by now.

                  Are you able to try a different NIC type?

                  Steve

                  V 1 Reply Last reply Reply Quote 0
                  • V
                    vegbrasil @stephenw10
                    last edited by vegbrasil

                    @stephenw10 I've been using pfSense with the same FTTH PPPoE connection and two different NICs models:

                    • Realtek NICs (re): crazy bugs, completely unusable - expected, I guess;
                    • Intel PRO/1000 NICs (em): Problem of the initial post: first connection is fine, re-connection never happens. If we forget this problem, everything is working great and I can max-out the connection (150 Mbps).

                    Upgraded and tried clean install between 2.3.5 and all 2.4.x versions.

                    Thanks!

                    1 Reply Last reply Reply Quote 0
                    • stephenw10S
                      stephenw10 Netgate Administrator
                      last edited by

                      Hmm, yes, this seems like it must be some other issue since you were seeing it in 2.4.3 also.

                      Steve

                      J 1 Reply Last reply Reply Quote 0
                      • J
                        Joxxxx
                        last edited by

                        I'm using a quad ethernet intel pro and never got any problems since v 2.0 or something like that on vmware and the vmx3 driver.

                        After analysing a bit the problem, could it be that I have this problem because pfsense sees his local ip address as the FTTH gateway ?
                        Maybe something changed in pf 2.4.4 in the pppoe connection that forbids the use of it ? (This could explain the two errors I get).

                        V 1 Reply Last reply Reply Quote 0
                        • V
                          vegbrasil @Joxxxx
                          last edited by

                          @joxxxx said in PPPoE WAN fails to reconnect after link loss:

                          I'm using a quad ethernet intel pro

                          I'm using the exactly same hardware and since we're having the same problem, we may have found the initial cause.

                          1 Reply Last reply Reply Quote 0
                          • J
                            Joxxxx @stephenw10
                            last edited by

                            @stephenw10 On my side, 2.4.3 is working perfectly and reaching the 1Gbits of the fiber connection. The problem is 2.4.4 and above where it doesn't want to allocate the ip address it gets (I can see the received ip address in the logs, but the error prevents it to be used).

                            1 Reply Last reply Reply Quote 0
                            • T
                              timboau 0
                              last edited by

                              How did you get anywhere with this problem?

                              I'm experiencing the same issue:

                              Could it be the PPPoE is not receiving a gateway address and the IP address its been given is a /32 255.255.255.255 address

                              This is the case with mine.

                              I started on 2.4.3 upgraded to 2.4.4 (this causes the WAN to drop and it attempt another connection - 2.4.3 got this error and left the link up)

                              Feb 4 12:22:20 ppp [wan] IFACE: Adding IPv4 address to pppoe0 failed(IGNORING for now. This should be only for PPPoE friendly!): Destination address required
                              Feb 4 12:22:20 ppp [wan] 118.xxx.xxx.xxx -> 0.0.0.0
                              Feb 4 12:22:20 ppp [wan] IPCP: LayerUp
                              Feb 4 12:22:20 ppp [wan] IPCP: state change Ack-Sent --> Opened
                              Feb 4 12:22:20 ppp [wan] IPADDR 118.xxx.xxx.xxx

                              V 1 Reply Last reply Reply Quote 0
                              • V
                                vegbrasil @timboau 0
                                last edited by

                                @timboau-0 I still have the issue, running the latest stable version of pfSense.

                                This weekend I needed to visit a site that was offline due this reconnection problem. I'm thinking of making some sort of simple script to reboot the server if the WAN is offline for a few minutes...

                                Thanks!

                                T 1 Reply Last reply Reply Quote 0
                                • T
                                  timboau 0 @vegbrasil
                                  last edited by

                                  This post is deleted!
                                  1 Reply Last reply Reply Quote 0
                                  • T
                                    timboau 0
                                    last edited by

                                    I'll add that im using APU intel nic no VM
                                    Tested clean install of 2.3.1 & 2.4.4

                                    2.3.1 has some additional information:
                                    Feb 4 02:35:58 ppp [wan] IPCP: LayerUp
                                    Feb 4 02:35:58 ppp [wan] 118.xxx.xxx.xxx -> 0.0.0.0
                                    Feb 4 02:35:58 ppp [wan] IFACE: Adding IPv4 address to pppoe0 failed(IGNORING for now. This should be only for PPPoE friendly!): Destination address required
                                    Feb 4 02:35:58 check_reload_status Rewriting resolv.conf
                                    Feb 4 02:35:58 php-fpm 19680 /rc.interfaces_wan_configure: Accept router advertisements on interface igb0
                                    Feb 4 02:35:59 check_reload_status updating dyndns wan
                                    Feb 4 02:35:59 check_reload_status rc.newwanip starting pppoe0
                                    Feb 4 02:35:59 ppp [wan] IFACE: Up event
                                    Feb 4 02:35:59 ppp [wan] IFACE: Rename interface ng0 to pppoe0
                                    Feb 4 02:36:00 php-fpm 34057 /rc.newwanip: rc.newwanip: Info: starting on pppoe0.
                                    Feb 4 02:36:00 php-fpm 34057 /rc.newwanip: rc.newwanip: on (IP address: ) (interface: WAN[wan]) (real interface: pppoe0).
                                    Feb 4 02:36:00 php-fpm 34057 /rc.newwanip: rc.newwanip: Failed to update wan IP, restarting...
                                    Feb 4 02:36:00 check_reload_status Configuring interface wan
                                    Feb 4 02:36:01 check_reload_status Reloading filter
                                    Feb 4 02:36:01 php-fpm 16228 /interfaces.php: Creating rrd update script
                                    Feb 4 02:36:02 xinetd 9811 Starting reconfiguration
                                    Feb 4 02:36:02 xinetd 9811 Swapping defaults
                                    Feb 4 02:36:02 xinetd 9811 readjusting service 6969-udp
                                    Feb 4 02:36:02 xinetd 9811 Reconfigured: new=0 old=1 dropped=0 (services)
                                    Feb 4 02:36:05 php-fpm 23933 /rc.interfaces_wan_configure: Accept router advertisements on interface igb0

                                    1 Reply Last reply Reply Quote 0
                                    • stephenw10S
                                      stephenw10 Netgate Administrator
                                      last edited by

                                      /32 is valid for a PPP connection as is a gateway outside the subnet.

                                      Obviously no gateway at all isn't though.

                                      Steve

                                      1 Reply Last reply Reply Quote 0
                                      • T
                                        timboau 0
                                        last edited by timboau 0

                                        I got my config working on 2.4.3 (but I think it will break on 2.4.4) - I had a slightly different problem to the above.

                                        With 2.4.3 I can authenticate and the interface stays up
                                        2.4.4 I authenticate and the interface cant be configured as it doesnt have a gateway IP so it goes down and then re-connects. (repeat)

                                        I fixed my problem : (Not being supplied a gateway via PPPoE)
                                        Configuring the interface with PPPoE (as per usual)
                                        Then creating a NEW interface on the same port as STATIC (save)
                                        Then open the interface again and create a gateway using that same IP

                                        I can see that if I lost authentication now on 2.4.3 I would likely loose connectivity as the PPPoE wont try again (without a reboot or port cycle)
                                        I worry on 2.4.4 that it will fail the interface configuration due to the missing gateway then the 2nd interface wont work either..

                                        1 1 Reply Last reply Reply Quote 0
                                        • stephenw10S
                                          stephenw10 Netgate Administrator
                                          last edited by

                                          Hmm, try it and see. Odd setup.

                                          Steve

                                          1 Reply Last reply Reply Quote 0
                                          • 1
                                            1eyebrow @timboau 0
                                            last edited by 1eyebrow

                                            @timboau-0
                                            Did someone noticed the same File Exists! error for PPPoE on 2.5.2 ? I have the same issue after the upgrade.

                                            IFACE: Adding IPv4 address to pppoe0 failed(IGNORING for now. This should be only for PPPoE friendly!): File exists

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post