Using Route-map to redistribute static route to OSPF

albert.robert

Hello I am using pfsense 2.3.4-RELEASE-p1. One interface is part of an OSPF area and redistributed connected is selected.

I also have static route to route trafic to a network connected with a transport vlan.

I don't want to select " enables the redistribution of kernel routing table " in the GUI, cause too many unwanted static routes will be redistributed.

I olny want to redistribute some static route.

ip route 192.168.122.0/24 10.193.20.20
ip route 192.168.110.4/32 10.193.20.20

How to do that in the raw config GUI page .

Here is the content of the config displayed in the status page

Quagga ospfd.conf

This file was created by the pfSense package manager. Do not edit!

password Passport
interface igb0_vlan33

router ospf
ospf router-id 10.193.253.71
redistribute connected
network 10.193.253.64/27 area 0.0.0.22
distribute-list dnr-list out connected
distribute-list dnr-list out kernel
distribute-list dnr-list out static
access-list dnr-list deny 172.16.200.0/30
access-list dnr-list deny 10.195.55.0/24
access-list dnr-list deny 10.195.65.0/24
access-list dnr-list permit any

Quagga zebra.conf

This file was created by the pfSense package manager. Do not edit!

password Passport

Thank you for your help.