Can ping internal network but access via TCP (ssh or http or smb) does not work
quist last edited by
I have a remote connect to a pfSense machine running OpenVPN in remote access mode. The remote client is a Mac OS X laptop running Viscosity. The connection is made and from there I can ping the LAN side of pfSense firewall (e.g. 10.10.10.1) as well as internal hosts e.g. 10.10.10.10 and 10.10.10.111.
However I can not say connect to the WebGUI of pfSense using http/https. Neither can I ssh to a host on the LAN side.
OpenVPN is set up in remote access (SSL/TLS) mode. The LAN side firewall rule allows any to any. As does the OpenVPN interface. It allows any to any. Any ideas what is going on?
Gertjan last edited by
LAN rules aren't important, as initial traffic goes out the LAN, not coming in.
"VPN"(or, if absent, "OpenVPN" tab rules) rules are important :
do you see the state counters going up ?
And, as you didn't mention : some other little details, like the local LAN from where you run your Mac with Viscosity must be different as the remote LAN on pfSense with OpenVPN.