Problem ppoe

jaybird

Hi again,

I have just re-applied my previously posted workaround for that PPPoE problem to the newest snapshot I could get:

pfSense-Full-Update-1.2.3-20090223-1749

Yes, it works.

Bringing the PPPoE connection up again involved the following:

Diagnostics: Edit File

Save/Load from path: /etc/inc/interfaces.inc

Now looking for lines saying:

set auth

(I found four "set auth" lines in my interfaces.inc)

Then changing every instance of set auth in interfaces.inc to:

set bundle

Save these changes to: /etc/inc/interfaces.inc

Interfaces: WAN

PPPoE configuration

save

(Yes, save it again.)

Status: Interfaces

PPPoE

connect

(waiting some 30 seconds…)

Done!

And accordingly (things change back to):

WAN interface (em1)
Status up
PPPoE up

Loaded text from /var/etc/mpd.conf

pppoe:
new -i ng0 pppoe pppoe
set iface route default
set iface disable on-demand
set iface idle 0
set iface up-script /usr/local/sbin/ppp-linkup
set bundle disable multilink
set bundle authname "my_adsl-username#0001@t-online.de"
set bundle password "my_adsl_password"
set bundle no noretry
set link keep-alive 10 60
set link max-redial 0
set link no acfcomp protocomp
set link disable pap chap
set link accept chap
set link mtu 1492
set ipcp yes vjcomp
set ipcp ranges 0.0.0.0/0 0.0.0.0/0
set ipcp enable req-pri-dns
set ipcp enable req-sec-dns
open iface

Any suggestions, feedback or comments on this issue is most welcome. I wonder if some of you tried that trick described above, and if there are known yet better solutions for the PPPoE problem at this time.

Regards,
jaybird

grandrivers

worked like a charm for me nice to have ppoe back agin

ssbaksa

Confirmed. It works now.

Sasa

Yuregir

im glad its working
thanks jaybird

podilarius

Had the sma problem and this fixed the issue. Could a dev fix this in the code?

andrewpc

also had this problem in latest snapshot. workaround implemented in interfaces.inc while waiting for fix. Thanks

cmb

Fixed, thanks.

pipis9242

I want to report that using :

1.2.3-PRERELEASE-TESTING-VERSION
built on Thu Mar 5 07:23:55 EST 2009

the problem persists , in order the situation to be fixed you have to edit /etc/inc/interfaces.inc
and change set auth instances to set bundle

so the fix AINT WORKING

saintpaul

@pipis9242:

1.2.3-PRERELEASE-TESTING-VERSION
built on Thu Mar 5 07:23:55 EST 2009

so the fix AINT WORKING

Try again with

1.2.3-PRERELEASE-TESTING-VERSION
built on Fri Mar 6 17:16:59 EST 2009

It seems the patch was first applied to that version. I had the same problems with the version you mentioned, but the latest build fixed it.

cmb

@pipis9242:

I want to report that using :

1.2.3-PRERELEASE-TESTING-VERSION
built on Thu Mar 5 07:23:55 EST 2009

the problem persists , in order the situation to be fixed you have to edit /etc/inc/interfaces.inc
and change set auth instances to set bundle

so the fix AINT WORKING

Yes it is working. Evidently I needed to state that I didn't go back in time to fix it, look at the time of my post and the time of your snapshot… Changes aren't going to magically appear in snapshots that were built 14-15 hours prior.

pipis9242

YES IT IS WORKING :)

a. SaintPaul : thank you for your suggestion

I tried : 1.2.3-PRERELEASE-TESTING-VERSION
built on Sat Mar 7 02:11:11 EST 2009

and works fine

b. cmb : thank you for your fix , I appreciate your efforts, concerning "Changes aren't going to magically appear in snapshots that were built 14-15 hours prior" , consider that Internet is Global and there is a term called "time difference" , the thing i did after reading your post in this thread was to test the latest available snapshot, sorry if i was misunderstood.

podilarius

Thank you very much cmb.