DHCP fails silently, but works on reboot of pfSense
-
@obelsen said in DHCP fails silently, but works on reboot of pfSense:
None. In the DHCP log, only events related to new leases are present.
What about in the main system log?
@obelsen said in DHCP fails silently, but works on reboot of pfSense:
The DHCP server fails only when modifying interfaces
Do you have any special settings on that interface? Maybe a spoofed MAC address, MTU, or other similar setting either on the parent interface (if assigned) or one of the VLANs?
-
@jimp said in DHCP fails silently, but works on reboot of pfSense:
@obelsen said in DHCP fails silently, but works on reboot of pfSense:
None. In the DHCP log, only events related to new leases are present.
What about in the main system log?
Negative. No logs at all. The only items present were standard login logs and other unrelated info.
@obelsen said in DHCP fails silently, but works on reboot of pfSense:
The DHCP server fails only when modifying interfaces
Do you have any special settings on that interface? Maybe a spoofed MAC address, MTU, or other similar setting either on the parent interface (if assigned) or one of the VLANs?
The interfaces are all standard settings with a static ip defined. No MAC spoofing or other non standard configuration.
The parent interface (LAN) also had a static IP like each vlan interface. -
I would like to add that this has been an issue for around a year, and I have previously written on the subreddit for pfSense for help to no avail.
-
Can you answer the other questions I asked in my previous reply?
-
@jimp said in DHCP fails silently, but works on reboot of pfSense:
Can you answer the other questions I asked in my previous reply?
I did, forgot to put a newline :)
-
The symptoms all fit with something causing a link loop which generally only happens on certain drivers in certain situations such as changing specific settings which cause the link to drop and come back.
That triggers the link up/down scripts, which reconfigure the interfaces, which triggers a new link event, and so on.
But that scenario would log quite a lot of info in the main system log as it happens. It wouldn't happen silently.
Are the affected NICs all
igbinterfaces? -
@jimp said in DHCP fails silently, but works on reboot of pfSense:
The symptoms all fit with something causing a link loop which generally only happens on certain drivers in certain situations such as changing specific settings which cause the link to drop and come back.
That triggers the link up/down scripts, which reconfigure the interfaces, which triggers a new link event, and so on.
But that scenario would log quite a lot of info in the main system log as it happens. It wouldn't happen silently.
Are the affected NICs all
igbinterfaces?It happens both when LAN is in the rj45 port (igb) and when moved to one of the spf+ ports (ix i believe)
-
Additionally, I forgot to mention that even restarting an openvpn server caused the problem.
Openvpn does however not cause the problem itself, as an install without openvpn showed the same issues. -
Restarting OpenVPN would also trigger a restart of some services, which could land in a similar scenario depending on the circumstances.
There must be something out of the ordinary on there that triggers it, however.
What other packages are on there? Any other services on the firewall?
I'd be interested in looking at a full copy of the config.xml if possible. You can redact some private info (passwords/certs/etc) but I'd like to see as much of it as possible. You can send it in a PM or send it to
<my forum username>@pfsense.organd you can encrypt it with GPG/PGP if you like, there is a key on public key servers for that e-mail address. -
I'll see what I can do, I'll take a look at it tomorrow and get back to you.
-
@jimp @obelsen
Here is some additional information from my end. Rebooting the pfsense gets everything working fine again. Left things running for 2 days without changing anything and everything ran smoothly for that period of time. System Log was totally clean.
The 2 days without changing anything was the time period it took to get a second X1541 shipped out to me. I couldn't keep rebooting to bring the DHCP server back on line every time I made an interface change.
So with the second x1541 in place (I haven't set up HA yet), I am now making the interface changes on the off-line X1541 saving config and rebooting, then hot swapping to production. Then taking the now off-line X1541, restoring the config I saved with the updates. This is working for now to get me thru some immediate updates I need to make, but certainly not a long term solution.
The clarify the syslog is totally clean until I make an interface change, then the log starts immediately filling up (as posted earlier) -
@bjk said in DHCP fails silently, but works on reboot of pfSense:
@jimp @obelsen
Here is some additional information from my end. Rebooting the pfsense gets everything working fine again. Left things running for 2 days without changing anything and everything ran smoothly for that period of time. System Log was totally clean.
The 2 days without changing anything was the time period it took to get a second X1541 shipped out to me. I couldn't keep rebooting to bring the DHCP server back on line every time I made an interface change.
So with the second x1541 in place (I haven't set up HA yet), I am now making the interface changes on the off-line X1541 saving config and rebooting, then hot swapping to production. Then taking the now off-line X1541, restoring the config I saved with the updates. This is working for now to get me thru some immediate updates I need to make, but certainly not a long term solution.
The clarify the syslog is totally clean until I make an interface change, then the log starts immediately filling up (as posted earlier)I don't think it's the exact same issue, as my system log does not have any indication of an issue when the DHCP server is down (other than that my service watchdog keeps restarting DHCPD)
-
It does seem like there is some overlap tho as we are both utilizing 100+ Vlans and the DHCP server stops functioning when any updates are made to Interfaces. Or maybe I'm over simplifying? In reading your posts, I want to say I'm seeing the same problem, only I do have system log activity. If our issues are somehow related, maybe the addition to me having the log activity is a clue? probably not... just throwing it out there.
-
@jimp As I am adding VLANs on the off-line x1541, I hit a snag. I was able to create the 163rd VLAN and select "Add" in the Interface Assignments, but now this latest VLAN I added isn't showing up in the Interface Assignments tab. If I go back to the VLANs tab, the VLAN I last created is there. When I try to delete the VLAN, I receive an error "This VLAN cannot be deleted because it is still being used as an interface". Yet it isn't showing up in the Interface list. I decided to reboot (after I saved the Config). Upon reboot, the last several VLANs were missing. I restored from the back up and was able to get back to where I was before the reboot (can see the VLAN but not the Interface).
@obelsen, you didn't run into any troubles adding all your VLANs? Have I hit some limitation here? -
@bjk said in DHCP fails silently, but works on reboot of pfSense:
@jimp As I am adding VLANs on the off-line x1541, I hit a snag. I was able to create the 163rd VLAN and select "Add" in the Interface Assignments, but now this latest VLAN I added isn't showing up in the Interface Assignments tab. If I go back to the VLANs tab, the VLAN I last created is there. When I try to delete the VLAN, I receive an error "This VLAN cannot be deleted because it is still being used as an interface". Yet it isn't showing up in the Interface list. I decided to reboot (after I saved the Config). Upon reboot, the last several VLANs were missing. I restored from the back up and was able to get back to where I was before the reboot (can see the VLAN but not the Interface).
@obelsen, you didn't run into any troubles adding all your VLANs? Have I hit some limitation here?I have not encountered this error.
-
There is no limit on the number of VLANs you can have in the GUI. I'm not quite sure what would have happened there, but I recall seeing anything like that before. Are you certain there wasn't some unintentional overlap? IIRC input validation prevents most obvious ways of causing duplicate entries but maybe something else was going on there.
Go to Diagnostics > Backup & Restore and check the config history at each point in the changes you made, see what was added when.
-
@jimp I've reviewed the interfaces a few times and cannot see any conflict or redundancies. Reviewing the XML, the VLAN and Interface are there, just doesn't show up in the UI.
I also stepped backwards in the configs a couple times to re-add the vlan and also tried adding a completely random vlan with the same result of it not showing up after adding in the interfaces.
From my experience, it appears I've hit a limit of not being able to add any more interfaces and have them show up in the UI... tho they are showing up in the XML -
This post is deleted! -
So exactly how many VLAN tags do you have in config.xml when they stop showing up?
And can you confirm which version of pfSense you are running on that device?
-
@jimp
Hardware XG-1541 running 2.4.4-RELEASE (amd64)
built on Thu Sep 20 09:33:19 EDT 2018
FreeBSD 11.2-RELEASE-p3The GUI stopped displaying after the 163 VLAN was created. Also, please recall, I rebooted after to see if something magic would happen. And it did. The GUI was now not evern showing the 162 VLANs Ihad previously created. I didn't count, but all I could see in the GUI for interfaces was more like ~155 VLANs. I restored the config from before the reboot and then I could see the 162 VLANs again in the GUI. At this time, I was not reviewing the XML to see what it had in it. But something wonky for sure going on with the GUI not displaying all interfaces.
btw, thank you very much for your help with this.
