PFsense VLAN on Hyper-v



  • Hello

    I installed PFSense on my Hyper-V server using the built in 2 port Nic using port1 for Wan and port2 for Lan. I created a Vlan for internal users and and guest on Vlan 30 & 40 and trunked the port. Everything worked fine so I moved on to adding a PCI 4 port nic so I could use a port for Wifi (Unify AP) and another for connected devices using an un-manged switch. Everything worked when I just create 2 virtual adapters but when I add the 3rd virtual adapter, the Vlan's fail to reach DHCP server on PFSense. I even tried to trunk all adapters with no luck. Below are my configurations. I pretty sure it's PFsense related but can't be 100%.

    6c3c0920-ff09-4b58-b8fa-5b5b5e3d53f6-image.png

    cad8c21d-e6b2-400a-b56e-33d07816ada5-image.png

    d3c0cf5d-2a4a-468c-8a6f-0b0e73b73cea-image.png

    0d8e1799-dd74-4125-8fb8-c0a87043e701-image.png

    3fcb41d6-f8c2-4123-80fd-0735327fb681-image.png


  • LAYER 8 Netgate

    Packet capture on the hn1 interface.

    Do you see traffic for hn1.30 there tagged with VLAN 30?

    If not, it's Hyper-V. If you do it would be working.



  • what version of Windows/Hyper-V is it?


Log in to reply