How to alllow DMZ to lan.???

[marksantos]

I configure the dmz interface, I set dmz to dhcp serverits works, but when I static ip to clients. no connection, I've already created firewall rules in two interfaces but still not working.

[netblues]

Post a diagram, ip configuration, firewall rules and what you are trying to accomplish.

[marksantos]

@netblues said in How to alllow DMZ to lan.???:

what you are trying to accomplish.

Here's my network diagram.

The problem is I cannot open the WEBGUI of the ELASTIX when I used static IP.

Here's my firewall rule on lan and DMZ.

[viragomann]

Consider that you also have to manually set a gateway and DNS servers on the clients if you don't use DHCP.

[marksantos]

@viragomann The problem is I cannot open the WEBGUI of the ELASTIX when I used static IP. i have two firewall rules in the two interface "lan >>>DMZ, DMz>>>Lan. the webgui of elastix cannot open.

[Derelict]

It is not the firewall. It must be the elastix server. Its default gateway must be 192.168.11.1.

Connections from LAN hosts to DMZ hosts are governed by rules on the LAN interface. You could make those connections with no rules at all on DMZ.